• Structural Engineering and Mechanics
• /
• v.60 no.4
• /
• pp.633-653
• /
• 2016

One of the major threats to the stability of classical columns and colonnades are earthquakes. The behavior of columns under high seismic excitation loads is non-linear and complex since rocking, wobbling and sliding failure modes can occur. Therefore, three dimensional simulation approaches are essential to investigate the in-plane and out-of-plane response of such structures during harmonic and seismic loading excitations. Using a software based on the Distinct Element Method (DEM) of analysis, a three dimensional numerical study has been performed to investigate the parameters affecting the seismic behaviour of colonnades' structural systems. A typical section of the two-storey colonnade of the Forum in Pompeii has been modelled and studied parametrically, in order to identify the main factors affecting the stability and to improve our understanding of the earthquake behaviour of such structures. The model is then used to compare the results between 2D and 3D simulations emphasizing the different response for the selected earthquake records. From the results analysis, it was found that the high-frequency motion requires large base acceleration amplitude to lead to the collapse of the colonnade in a shear-slip mode between the drums. However, low-frequency harmonic excitations are more prominent to cause structural collapse of the two-storey colonnade than the high-frequency ones with predominant rocking failure mode. Finally, the 2D analysis found to be unconservative since underestimates the displacement demands of the colonnade system when compared with the 3D analysis.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.3
• /
• pp.83-90
• /
• 2011

The purpose of this study is to analyze size and proportion of plan and section, and derive characteristics by types of worship-space in central hall of buddhist temple. This study covers 45 buddhist temples as designated national treasure and treasure. Types of central hall of buddhist temple are 'Columnless Type', 'Inner Column Type', and 'Colonnade Type'. The results are as follows. Firstly, in the proportion of width and length, 'Columnless Type' is mostly represented with 1:0.73, 'Inner Column Type' with 1:0.54 and seems to be widening for the other types, and 'Colonnade Type' is same proportion with 'Columnless Type'. Secondly, in the proportion of width and height, 'Columnless Type' is 1:0.61 and sizes of worship-space of this type are different but the proportion is same. In the 'Inner Column Type', worship-space is enlarged because a buddhist altar is hustled into the rear. Thirdly, in the proportion of length and height, all types are represented with similar proportion as 1:1. Finally, proportion of the volume of worship-space in 'Columnless Type' is 1(width):0.74(length):0.60(height). The case of 'Inner Column Type' is 1:0.57:0.57 and length of worship-space is shortened, so characteristics of horizontality is emphasized. The space of same size with the proportion of 'Columnless Type' is situated in the inside of worship-space in 'Colonnade Type'.

• Journal of the Korean earth science society
• /
• v.35 no.7
• /
• pp.501-517
• /
• 2014

Based on a summary of the previous studies on columnar joints, this study presents research strategies and subjects to understand a formation of columnar joints, and its application in South Korea as follows; geometry of colonnade and entablature, formation mechanism and pattern change, surface morphology and internal structure, platy joint at the top and the bottom of columnar joints, crack patterns in drying starch-water slurries, using numerical models and computer graphics on joint formation, scale and geometry concerned with occurrence of volcanic rock, petrological and mineralogical study of the host rock. Additionally, more research is needed, such as deformation of column pattern during the hot state, secondary landform by alteration and weathering on the Earth's surface such as rock stream, tor and tafoni. This study will take an active role in research of columnar joint and the Cenozoic lava flow of South Korea. Results of this study will be useful to the activation of geotourism and geological field study.

• Journal of architectural history
• /
• v.26 no.1
• /
• pp.17-30
• /
• 2017

The aim of this study is to examine the square shape cases of rafter end header with special reference to wooden architecture and Uigwe records. In Uigwe, the member Bangyeon is widely used in multiple Changung and Chansil, and it is the most used in various gates in the buildings. It is also found in Haenggak and Subokbang. In the surviving wooden architecture, Bangyeon is found in pavilion, colonnade and gate in Changdeokgung Palace, and it is often seen in palace architecture. It is rare in private sector, and it is shown in Sangju Yangjindang and Andong Songsojongtaek. A total of 48 cases in Uigwe, can found records of Bangyeon. According to the records, mainly Yeonggeon Uigwe and Salleung Uigwe, it can be found that gates, also Bangyeon was used.

• Korean Institute of Interior Design Journal
• /
• no.32
• /
• pp.13-20
• /
• 2002

This study is purposed to find fundamental characteristics in Grassi's architecture which has architectural principles in architecture itself and in the general frame of the historical facts of architecture. His architectural theories can be explained for rationality, historicity, universality. The method of architectural composition can be divided into urban morphological characteristic and compositional characteristic of architecture. The characteristics of the former are the reconstruction of the urban structure by the readjustment of an urban axis which is based on historical continuity of the city, the open court which is a passage transformed from colonnade that is the historical vernacular type and the respect for the city-line which goes with historical context. The characteristics of the latter are the use transformed of nine square which gives consideration to centrality and typology at the same time and the hierarchic division of the principal space and the subordinate space for the functional typical purpose. This analysis shows that Grassi's architecture is on the base of historical continuity and urban reality and for him architectural work is mental work which conflict with the real world for the reconstruction of the city.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.4 s.42
• /
• pp.212-225
• /
• 2005

This study has been designed to elucidate the morphology of Jisagae columnar joints and the petrography and petrochemistry of Daepodong basalt in Jeju Island, distributed along the 3.5 km-long coast from Seongcheonpo to Weolpyeongdong. Colonnade of the Jisagae columnar joint typically occurs within the upper part of a flow and consists of relatively well-formed basalt columns. Most columns are straight with parallel sides and diameters from 100 cm to 205 cm, $130\~139\;cm$ in maximum. Length of the columns extends up to 20 m. Most columns tend to have 6 or 5 sides but sometimes they have as few as $3\~4$ or as many as 7 or 8 sides. The Daepodong basalt consists of plagioclase, olivine, orthopyroxene, clinopyroxene, ilmenite and magnetite. Plagioclase is labradorite, clinopyroxene is augite, orthopyroxene is bronzite and olivine is chrysolite and hyalosiderite. The Daepodong basalt shows porphyritic texture with matrix of mainly intersetal texture. The Daepodong basalt is plotted into alkali rock series on the TAS diagram. The tectonic setting of the Daepodong basalt represents within plate environment.

• Journal of the Korean earth science society
• /
• v.39 no.6
• /
• pp.575-592
• /
• 2018

This study investigates the formation mechanism of columnar joints at the Sanin Kaigan Geopark in Japan based on its morphology, rock type and igneous structure. Columnar joints distribute to five areas of three prefectures. That is, Kyogasaki, Byobuiwa, Tateiwa and Kyugenkado in Kyotango area of Kyoto prefecture; Genbudo and Kinumaki Shrine in Toyooka City of Hyogo prefecture; Yoroinosode, Takanosushima, Mini-Yoroinosode in Kamicho Town of Hyogo prefecture; Miooshima and Nagasakihana, Shitaara Domon, Kuzakuishi, Moroyose dyke in Shinonsencho Town of Hyogo prefecture; Shirawara dyke in Iwamicho Town in Tottori prefecture. Igneous structures are divided into three types: lava flow, sill and dyke. Lithologies are divided into five types including basalt, andesite, dacite, rhyolite, and quartz porphyry. Lava flow shows colonnade and entablature. However, entablature is not seen in the sills and dykes in the area. Although the polygons of columnar joint vary from tetragon to octagon, hexagon is most frequently found. The width of colonnades ranges from 10cm to 1m, but their size does not correlate with its $SiO_2$ contents. Meanwhile, their size and morphology at single site are comparatively uniform.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.45-59
• /
• 2014

This study has been designed to collate distribution, morphology, petrology of columnar joint in South Korea. Reported columnar joint areas in South Korea are 68, until the present time. These can be divided into five group by geography and volcanic activity. 1) The 16 columnar joint areas are distributed in Hantangang region. The 15 areas in this region are composed of basaltic lava in the Quaternary period, and the other 1 area is composed of volcanic rocks in the Cretaceous period. 2) The 18 columnar joint areas are distributed in Jeju island. Most of them are composed of basaltic lava(alkali basalt and Hawaiite), and the Sanbangsan and Baegrokdam area are composed of trachyte in the Quaternary period. Colonnade, entablature and chisel mark of the columnar joint are typically occur in basaltic lava. 3) The 5 columnar joint areas are distributed into the Ulleung island and Dokdo including Guksubawi. These are consisted of relatively well-formed trachyte columns in the Quaternary period. 4) The 8 columnar joint areas are distributed into the Pohang, Gyeongju and Ulsan region and consist of the Tertiary period volcanic rock. It's shape are dome, radial, horizontal and vertical. The 4 columnar joint areas are reported in the Pyeongtaek and Asan city of Chungcheongnamdo and Gosung of Gangwondo. All of them are the Tertiary period basalt. 5) The 15 columnar joint areas are distributed into the west and south coast region. Those are consisted of various rock type(from basalt to dacite), various occurrences(lava flow to welded tuff), and various diameters(20 cm to several meters). The columnar joint of Mudeung mountain and Juwang mountain are welded tuff in the Cretaceous period. The columnar joint is distributed over a wide area in South Korea, 5 in Gangwondo, 13 in Gyeonggido, 2 in Chungnam, 14 in Gyeongbuk, 1 in Jeonbuk, 10 in Jeonnam, 5 in Gyeongnam, and 18 in Jeju. The columnar joints in South Korea can be arranged in order of formative period, 18 in the Cretaceous period, 12 in the Tertiary period, and 38 in the Quaternary period. By magma series, 36 are belong to alkaline series and 32 are belong to sub-alkaline series.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.3
• /
• pp.37-53
• /
• 2023

This study aimed to analyze the commemoration characteristics of the national war memorials made by the United States, the Union of Soviet Socialist Republics(the Soviet Union), and Germany that participated in World War II(WW II). The results of the study are summarized as follows. First, the creation of the WW II memorials of the United States, the Soviet Union, and Germany aimed to commemorate the dead and victims. By country, the United States promoted unity and victory with representing the just and great cause for freedom, and the communist Soviet Union emphasized the Great Patriotic War that defeated fascist Nazi Germany. On the other hand, Germany, which had difficulty in national commemoration, cherish the victims of the war and aimed for peace. Second, WW II memorials were located in places of national significance such as national representative places and battlefields, and in Germany they were built in church cemeteries and public cemeteries. In addition, it showed concise and moderate aesthetic characteristics with a symmetrical and formal form centered on the axis of space in memorials. Third, the United States and the Soviet Union commonly visualized the appearance of war on the memorial wall. By country, the United States engraved sacrifice and dedication for freedom, and differently the Soviet Union and East Germany engraved messages promoting communist ideology as memorial texts. As for landscape details and sculpture, the United States emphasized national unity through eagles symbolizing the country and a colonnade representing each state and territory, and the Soviet Union set up a communist-style soldier sculpture. The United States and the Soviet Union, both countries used sculptures and laurels that symbolize victory, but in Germany, the statues of a fallen soldiers were installed in the memorial. Politically, the United States commemorated the victory of the war and also promoted unity, and the Soviet Union emphasized the Great Patriotic War and promoted communism. As the United States, the Soviet Union, and the Germans believed in Christianity universally, Christian symbols such as the crucifixion, the church, and the statue of Evita were often used. Further study will be required to establish national identity at memorials and advanced commemorative culture in Korea.