• 한국시뮬레이션학회논문지
• /
• 제19권4호
• /
• pp.1-9
• /
• 2010

본 논문에서는 여객선의 승객 비상 탈출 시뮬레이션을 구현하였다. 승객의 행동에 미치는 요인 중 연령, 성별을 고려하여 승객 개인의 보행 속도에 반영하는 속도 기반 모델을 사용하였다. 승객들의 집단 이동을 구현하기 위해 플로킹 알고리즘을 적용하였다. 장애물과의 충돌 회피 및 승객 간의 위치가 겹치는 현상을 방지하기 위해 페널티 보행 속도를 도입하였다. 이 알고리즘을 이용하여 여객선의 승객 탈출 규정인 IMO (International Maritime Organization) MSC (Maritime Safety Committee) Circ.1238에서 정의한 11가지 시험 문제에 적용하였다. 시험 문제를 통해 승객의 위치가 겹치는 현상이 없이 시뮬레이션 되는 것을 확인하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.267-267
• /
• 2019

Driftwood is one of serious problems in a river environment. In several countries, such as Indonesia, Japan, and Italy, the driftwood frequently appears in a river basin, and it can alter the channel bed, flow configuration by wood deposition and jam formation. Therefore, the studies related to driftwood have been actively conducted by many researchers to understand the mechanism of driftwood dynamics. In particular, wood motion by collision is one of the difficult issues in the numerical simulation because the calculation for wood collision requires significantly expensive calculation time due to small time step. Thus, this study conducted the numerical simulation in consideration of the wood motion by water flow and wood collision to understand the wood dynamics in terms of computation. We used the 2D (two-dimensional) depth-averaged velocity model, Nays2DH, which is a Eulerian model to calculate the water flow on the generalized coordinate. A Lagrangian type driftwood model, which expresses the driftwood as connected sphere shape particles, was employed to Nays2DH. In addition, the present study considered root wad effect by using larger diameter for a particle at a head of driftwood. An anisotropic bed friction was considered for the sliding motion dependent on stemwise, streamwise and motion directions. We particularly considered changeable draft at each particle and projection area by an angle between stemwise and flow directions to precisely reproduce the wood motions. The simulation results were compared with experimental results to verify the model. As a result, the simulation results showed good agreement with experimental results. Through this study, it would be expected that this model is a useful tool to predict the driftwood effect in the river flow.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1693-1703
• /
• 2003

This paper presents a new local obstacle avoidance method for indoor mobile robots. The method uses a new directional approach called the Lane Method. The Lane Method is combined with a velocity space method i.e., the Curvature-Velocity Method to form the Lane-Curvature Method (LCM). The Lane Method divides the work area into lanes, and then chooses the best lane to follow to optimize travel along a desired goal heading. A local heading is then calculated for entering and following the best lane, and CVM uses this local heading to determine the optimal translational and rotational velocities, considering some physical limitations and environmental constraint. By combining both the directional and velocity space methods, LCM yields safe collision-free motion as well as smooth motion taking the physical limitations of the robot motion into account.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.156-160
• /
• 2006

본 연구에서는 액체 추진제 로켓엔진의 연소기에 주로 사용되는 액체-액체 동축 스월형 분사기의 분무특성에 대해 고찰하였다. 액막의 분열에는 선형 안정성 이론[1]을 도입하였고 분열 후 충돌에는 충돌이후 분열이 고려된 Post[2]의 모델을 사용하였으며, solver로는 KIVA[3]를 사용하였다. 이러한 모델을 통해 디젤 엔진에 적합한 고속 분사와 로켓엔진에 적합한 저속 분사를 각각 검증하였고 실험결과와 잘 일치하는 것을 볼 수 있었다.

• Tribology and Lubricants
• /
• 제20권6호
• /
• pp.322-329
• /
• 2004

Recently, a load/unload(L/UL) system is adopted to the hard disk drive(HDD) due to its advantages such as lower power consumption, larger data zone, simpler fabrication of disk due to no bumped parking zone, and rarer contact between slider and media. An analysis of the transient motion for the slider is very important to design an air bearing surface(ABS) of the slider to secure the stable performance of the system. During the L/UL process, however, there are several issues occurred such as contact or collision between slider and media. Sometimes this will cause the system failure. In this study, the dynamics of a pico slider during the loading process are investigated through numerical simulation using FEM analysis and experiment. Ramp profile and angular velocity of the swing arm actuator are very important parameters for the design of L/UL system to avoid collision between slider and disk.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.85-90
• /
• 2007

The main function of the Forward Vehicle Collision Warning System (FVCWS) is to warn a driver when he or she experiences dangerous situations caused by a forward vehicle. Warning distance algorithms under same dangerous circumstances are often various depending on automobile manufacturers and component suppliers. Human factors also should be considered to warn the driver at an adequate warning distance. Therefore, it is necessary to develop a system for evaluating the pertinent warning timing in an identically dangerous situation. The system consists of sensors for measuring speed and acceleration of subject vehicle and target vehicle, controllers to follow the velocity profile properly, and wireless telecommunication equipments for receiving or transmitting the measured data in a real-time. According to actual field tests, it is shown that the developed system is suitable to evaluate warning distance of FVCWS.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.33-34
• /
• 2015

북극항로(NSR)를 통항하는 상선과 화물량이 매년 중가추세에 있다. 쇄빙선의 도움을 받아 북극항로를 통항하는 상선의 안전한 항해를 위협하는 가장 큰 요인은 얼음과의 충돌이다. 따라서 선박과 얼음의 충돌 메커니즘을 규명하기 위한 노력이 관련 연구자들에 의해서 활발히 이루어지고 있다. 본 연구에서는 북극항로를 운항하는 내빙선과 유빙의 충돌을 가정한 예인수조실험을 실시하며, 충돌 후 얼음의 운동(속력, 궤적)을 머신비전검사를 통해서 계측한다. 아울러 오차계산을 통해서 머신비전검사 기법의 정밀도를 검증한다.

• Structural Engineering and Mechanics
• /
• 제20권4호
• /
• pp.451-463
• /
• 2005

Structural members commonly employed in marine and off-shore structures are usually fabricated from plates and shells. Collision of this class of structures is usually modeled as plate and shell structures subjected to dynamic impact loading. The understanding of the dynamic response and energy transmission of the structures subjected to low velocity impact is useful for the efficient design of this type of structures. The transmissions of transient energy flow and dynamic transient response of these structures under low velocity impact are presented in the paper. The structural intensity approach is adopted to study the elastic transient dynamic characteristics of the plate structures under low velocity impact. The nine-node degenerated shell elements are adopted to model both the target and impactor in the dynamic impact response analysis. The structural intensity streamline representation is introduced to interpret energy flow paths for transient dynamic response of the structures. Numerical results, including contact force and transient energy flow vectors as well as structural intensity stream lines, demonstrate the efficiency of the present approach and attenuating impact effects on this type of structures.

• 자동차안전학회지
• /
• 제4권2호
• /
• pp.5-10
• /
• 2012

Whiplash is the most frequent injury among occupants in low speed rear-end car collision. The aim of this paper is to analyze thecorrelation between influence parameters of head restraints and whiplash injury criteria.In this paper, DFSS (Design for Six Sigma) method is used for optimum design of head restrains. Four control factors of head restraints have selected by function matrix method. The effects of the control factors have been experimentally evaluated by using a sled pulse from 16km/h relative velocity which is suggested by KNCAP (Korean New Car Assessment Program). In order to reduce the noise factors of dynamic tests, whiplash tests were repeated twice. By using DFSS, the correlation between control factors and injury criteria has been comprehended.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1582-1583
• /
• 2011

Recently, it has been found that trifluoroiodomethane ( $CF_3I$) gas can replace $SF_6$ gas as a prospective substitute gas. For quantitative understanding of gas discharge phenomena, we should know electron collision cross sections and electron transport coefficients. Using electron collision cross sections of $CF_3I$ and Xe, we calculated elecron drift velocity, longitudinal coefficient, effective ionization coefficient in $CF_3I$-Xe mixtures using a two-term approximation of the Boltzmann equation. We also compared the electron transport coefficients in pure gas and those of 10%, 20%, 50%, and 70% $CF_3I$-Xe mixture gases. The present data may be showed appropriate ratios of $CF_3I$-Xe mixture gas for replacing the $SF_6$ gas.