• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.7
• /
• pp.741-753
• /
• 2008

This paper explores the throughput performance of CSMA/CA-based DCF protocol over both ideal channels and fading channels with payload size at the MAC layer in the 802.11a wireless LAN. In the ideal channel, there are no errors and at the transmission cycle there is one and only one active station which always has a packet to send and other stations can only accept packets and provide acknowledgements. In the fading channel, bit errors appear in the channel randomly and the number of stations is assumed to be fixed. And each station always has packets for transmission. In other words, we operate in saturation conditions. Up to now conventional research work about DCF throughput analysis of IEEE 802.11 a wireless LAN has been done over the ideal channel, but this paper is done over the Rayleigh/Ricean fading channel. So, the ratio of received average energy per bit-to-noise power spectral density $E_b/N_o$ is set to 25 dB and the ratio of direct-to-diffuse signal power in each sub-channel $\xi$ is set to 6 for combined Rayleigh/Ricean fading channel. In conclusion, it is shown that the saturation throughput is always less than the maximum throughput at all the payload size and the higher the transmission rate be, the higher the decreasing rate of saturation throughput compared to the maximum throughput be.

• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.139-150
• /
• 2006

A schematic map is a special purpose map which is generated to recognize it's objects easily and conveniently via simplifying and highlighting logical geometric information of a map. To manufacture the schematic map with road, label and icon, we must generate simplified route map and replace many geometric objects. Performing a give task, however, there are an amount of overlap areas between geometric objects whenever we process the replacement of geometry objects. Therefore we need replacing geometric objects without overlap. But this work requires much computational resources, because of the high complexity of the original geometry map. We propose the schematic map generation system whose map consists of icons and label. The proposed system has following steps: 1) eliminating kinks that are least relevant to the shape of polygonal curve using DCE(Discrete Curve Evolution) method. 2) making an evenly distributed route using CVT(Centroidal Voronoi Tessellation) and Grid snapping method. Therefore we can keep the structural information of the route map from CVT method. 3) replacing an icon and label information with collision avoidance algorithm. As a result, we can replace the vertices with a uniform distance and guarantee the available spaces for the replacement of icons and labels. We can also minimize the overlap between icons and labels and obtain more schematized map.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.24-29
• /
• 2006

본 논문에서는 광대역 통신 방송 융합 서비스 제공을 고려한 WDM 메트로 링 망을 위한 매체 접근 제어(Medium Access Control; MAC) 프로토콜의 성능을 분석한다. 현재 인터넷은 통신 방송 융합 망으로 진화하고 있으며 다양한 트래픽 특성을 갖는 서비스가 액세스 망에서 메트로 망으로 유입되고 있다. 그러나 기존 메트로 망의 MAC 프로토콜은 이러한 망 환경 변화를 고려하지 않고 단순하고 동일한 트래픽만을 고려하여 성능을 분석하였다. 따라서 본 논문에서는 메트로 링에 연결된 액세스 노드의 입력 트래픽을 Self-Similar와 Poisson 트래픽으로 분류하여 기존 MAC 프로토콜의 성능을 분석하고 평가한다. 메트로 링 망에 연결된 액세스 노드는 이 두 종류의 트래픽 중에서 하나를 망에 유입하며 채널을 공유하는 노드 수에 따라서 다양한 트래픽 환경이 고려된다. WDM 메트로 링망의 기본 MAC 프로토콜은 CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance)이며, 패킷을 빈 슬롯에 전송하고 송신지에서 패킷을 제거하는 SS (Source-Stripping) 기반으로 운용된다. 본 논문에서는 SS 방식으로 생성된 빈 슬롯을 바로 패킷 전송에 이용하는 방식과 그렇지 않은 방식을 각각 1-Persistent와 non-Persistent로 분류하고 MAC 프로토콜을 분석하여 기존 방식의 장 단점을 비교한다. 또한 전송 공정성과 처리율을 같이 고려하여 적용할 수 있는 확률 기반 p-Persistent MAC 프로토콜도 분석하였으며 시뮬레이션을 통하여 각 프로토콜을 노드 처리율, 전송 지연, 패킷 손실률, 전송 공정성 관점에서 비교하고 평가한다.y 수행을 여러 서버로 분산처리하게 함으로써 성능에 대한 신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수 있을 것으로 기대된

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.1
• /
• pp.20-27
• /
• 2018

In this paper, the problem of a double-parked car has been investigated and a method to solve it is studied. Double parking is very common in a public parking lot with insufficient parking space. If a double-parked car blocked the way, a person needs to push the double-parked car to move it. The problem is that moving a double-parked car with hands is very hard and dangerous, especially for the old and the weak. To solve the above mentioned problem, an automatic mover for a double-parked car is proposed and developed. The basic idea is that a double-parked car can be moved by rolling its one wheel. Two rollers are designed and manufactured, which are used to roll a wheel of a double-parked car. The developed automatic mover has two rollers, two driving wheels, and four castors. It also has several ultrasonic sensors so that it can detect obstacles in the way and prevent possible collision. It is verified through several experiments that the developed automatic mover can move a double-parked car safely and easily.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.21-30
• /
• 2012

Sensor networks are composed of a great number of sensor nodes with constrained battery. Disjoint multipath scheme based flooding method has a merit that efficiently construct multipath in irregular networks, but causes lots of energy consumption in networks. Flooding method is not a suitable technology in wireless sensor networks with constrained battery. We introduce energy-efficient geographic routing scheme considered as an efficient, simple, and scalable routing protocol for wireless sensor networks. The geographic routing scheme on multipath generates a problem with a congestion. So we introduce the concept of multipath pipeline as a congestion avoidance strategy. But multipath pipelines have a big problem on the boundary of holes under irregular networks. We propose a novel disjoint multipath scheme as combined method with geographic routing scheme and hole detouring algorithm on multipath. A novel disjoint multipath scheme constructs disjoint multipath pipelines efficiently for reliability without a collision in irregular wireless sensor networks. Simulation results are provided to validate the claims.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.6
• /
• pp.10-21
• /
• 2010

In the cluster-tree network which covers wide area network and has many nodes for monitoring purpose traffic is concentrated around the sink. There are long transmit delay and high data loss due to the intensive traffic when IEEE 802.15.4 is adapted to the cluster-tree network. In this paper we propose Dynamic Channel Allocation algorithm which dynamically allocates channels to increase the channel usage and the transmission success rate. To evaluate the performance of DCA, we assumed the monitoring network that consists of a cluster-tree in which sensing data is transmitted to the sink. Analysis uses the traffic data which is generated around the sink. As a result, DCA is superior when much traffic is generated. During the experiment assuming the least amount of traffic, IEEE 802.15.4, has the minimum length of active period and 90% data transmission success rate. However DCA maintains 11.8ms of active period length and results in 98.9% data transmission success rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1788-1795
• /
• 2017

In this paper, we proposed a service that provides CPA/TCPA information to ships, without ARPA/ATA devices to support decision making of the navigator for maritime safety based on various services at shore and off-shore. To verify the proposed service, we use SiNAS (scenario-based simulator for NAS) with CPA/TCPA information providing software to evaluate its usability, because executing the test in real ship has many limitations and difficulties. To do this, we specify two simulation scenarios for the required purpose, and we liaise twelve participants with various navigation experience to conduct the simulations. Also, we analyze the results of simulation using mission success or not, the minimum approaching distance with the target ship, the time of a recognition the target ship, the time of a first action for collision avoidance with the target ship, and so on. Then, we evaluate usability of the proposed service based on the three elements which are effectiveness, efficiency and satisfaction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1824-1832
• /
• 2011

In this paper, a smart home service robot McBot II is newly developed in much more practical and intelligent system than McBot I which we had developed a few years ago. Thus far, vacuum-cleaners have lightened the burden of household chores but the operational labor that vacuum-cleaners entail has been very severe. Recently, a cleaning robot was commercialized to solve but it also was not successful because it still had the problem of mess-cleanup, which pertained to the clean-up of large trash and the arrangement of newspapers, clothes, etc. Hence, we develop a new home mess-cleanup robot McBot II to completely overcome this problem on real environments. The mechanical design and the basic control of McBot II, which performs mess-cleanup function etc. in house, is actually focused in this paper. McBot II is mechanically modeled in the same method that the human works in door by using the waist and the hands. The big-ranged vertical lift and the shoulder joints to be able to forward move are mechanically designed for the operating function as the human's waist when the robot works. The mobility of McBot II is designed in the holonomic mobile robot for the collision avoidance of obstacle and the high speed navigation on the small area in door. Finally, good performance of McBot II, which has been optimally desinged, is confirmed through the experimental results for the control of the robotic body, mobility, arms and hands in this paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.557-565
• /
• 2021

Path-following control is considered as one of the most fundamental skills to realize autonomous navigation of marine vessels in the ocean. This study addresses with the path-following control for a ship in which there are environmental disturbances in the directions of the surge, sway, and yaw motions. The guiding principle and back-stepping method was utilized to solve the ship's tracking problem on the reference path generated by a virtual ship. For path-following control, error dynamics is one of the most important skills, and it extends to the research fields of automatic collision avoidance and automatic berthing control. The algorithms for the guiding principles and error variables have been verified by numerical simulation. As a result, most error variables converged to zero values with the controller except for the yaw angle error. One of the most interesting results is that the tracking errors of path-following control between two ships are smaller than the existing safe passing distances considering interaction forces from near passing ships. Moreover, a trade-off between tracking performance and the ship's safety should be considered for determining the proper control parameters to prevent the destructive failure of actuators such as propellers, fins, and rudders during the path-following of marine vessels.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.222-234
• /
• 2020

Autonomous vehicles are equipped with a wide rage of sensors such as GPS, RADAR, LIDAR, camera, IMU, etc. and are driven by recognizing and judging various transportation systems at intersections in the city. The accident ratio of the intersection of the autonomous vehicles is 88% of all accidents due to the limitation of prediction and judgment of an area outside the sensing distance. Not only research on non-signalized intersection collision avoidance strategies through V2V and V2I is underway, but also research on safe intersection driving in failure situations is underway, but verification and fragments through simple intersection scenarios Only typical V2V failures are presented. In this paper, we analyzed the architecture of the V2V module, analyzed the causal factors for each V2V module, and defined the failure mode. We presented intersection scenarios for various road conditions and traffic volumes. we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to analyze the risk of autonomous vehicle based on the simulation. We presented ASIL, which is the result of risk analysis, proposed a monitoring concept for each component of the V2V module, and presented monitoring coverage.