• 제목/요약/키워드: collection-based computation

검색결과 31건 처리시간 0.029초

한국과 미국의 자연수 덧셈과 뺄셈 지도에서 세기와 묶음에 기초한 계산방법의 고찰 - 수직선의 활용을 중심으로 - (On Counting-based and Collection-based Computation of Addition and Subtraction Teaching of Natural Number in Korea and United States of America. - Focused on using Number line -)

  • 최창우
    • East Asian mathematical journal
    • /
    • 제34권2호
    • /
    • pp.85-101
    • /
    • 2018
  • The purpose of this paper is to investigate counting-based and collection-based computation of the elementary mathematics textbook in Korea and United States of America. As a results, we will provide some suggestive points through how to use and activity of number line, decomposing number, counting, grouping and so on by analyzing counting and collection-based computation in the elementary mathematics textbook of Korea and United States of America.

소프트웨어 정의 모바일 에지 차량 네트워크(SDMEVN)의 센싱 데이터 수집 전략 (A Sensing Data Collection Strategy in Software-Defined Mobile-Edge Vehicular Networks (SDMEVN))

  • 라이오넬;장종욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 추계학술대회
    • /
    • pp.62-65
    • /
    • 2018
  • This paper comes out with the study on sensing data collection strategy in a Software-Defined Mobile Edge vehicular networking. The two cooperative data dissemination are Direct Vehicular cloud mode and edge cell trajectory prediction decision mode. In direct vehicular cloud, the vehicle observe its neighboring vehicles and sets up vehicular cloud for cooperative sensing data collection, the data collection output can be transmitted from vehicles participating in the cooperative sensing data collection computation to the vehicle on which the sensing data collection request originate through V2V communication. The vehicle on which computation originate will reassemble the computation out-put and send to the closest RSU. The SDMEVN (Software Defined Mobile Edge Vehicular Network) Controller determines how much effort the sensing data collection request requires and calculates the number of RSUs required to support coverage of one RSU to the other. We set up a simulation scenario based on realistic traffic and communication features and demonstrate the scalability of the proposed solution.

  • PDF

Weighted Adaptive Opportunistic Scheduling Framework for Smartphone Sensor Data Collection in IoT

  • M, Thejaswini;Choi, Bong Jun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권12호
    • /
    • pp.5805-5825
    • /
    • 2019
  • Smartphones are important platforms because of their sophisticated computation, communication, and sensing capabilities, which enable a variety of applications in the Internet of Things (IoT) systems. Moreover, advancements in hardware have enabled sensors on smartphones such as environmental and chemical sensors that make sensor data collection readily accessible for a wide range of applications. However, dynamic, opportunistic, and heterogeneous mobility patterns of smartphone users that vary throughout the day, which greatly affects the efficacy of sensor data collection. Therefore, it is necessary to consider phone users mobility patterns to design data collection schedules that can reduce the loss of sensor data. In this paper, we propose a mobility-based weighted adaptive opportunistic scheduling framework that can adaptively adjust to the dynamic, opportunistic, and heterogeneous mobility patterns of smartphone users and provide prioritized scheduling based on various application scenarios, such as velocity, region of interest, and sensor type. The performance of the proposed framework is compared with other scheduling frameworks in various heterogeneous smartphone user mobility scenarios. Simulation results show that the proposed scheduling improves the transmission rate by 8 percent and can also improve the collection of higher-priority sensor data compared with other scheduling approaches.

제놈 분석용 계산 Web 서버의 구성 (Construction of a Computation Web Server for Genome Analysis)

  • 박기정;이병욱;박용하
    • 한국미생물·생명공학회지
    • /
    • 제24권1호
    • /
    • pp.132-136
    • /
    • 1996
  • A comutation server is needed to provide analysis programs to Korean biologists, especially genome researchers, on GINet. For each analysis program, we implmented an input form with HTML and a CGI program for interface between an input form and an analysis program with C language on GINet computatin Web server. We made two construction methods of CGI programs for analysis programs, and implemented all CGI programs based on the methods followed by modifying each CGI program for specific processing of each program. On the server ten programs are availabel now, which include most frequently used ones and those developed by our team, and most programs with will be ported or developed by our team will be available on the Web server.

  • PDF

반응표면법을 이용한 양측 철심형 영구자석 선형 동기기의 구조 최적화 (Structure Optimization of Double-Sided Iron-Core Type Permanent Magnet Linear Synchronous Machine Using Response Surface Method)

  • 이상건;주옥오;조윤현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1210-1211
    • /
    • 2011
  • The inherent drawback of iron-core type permanent magnet linear synchronous motor (PMLSM) is detent force that is dependent on several major factors such as PM length, slot clearance, and skewing. To minimize the detent force, this paper proposes a structure optimization using the combination computation of two dimensional (2-D) finite element analysis (FEA) and response surface methodology (RSM). The RSM, that is a collection of the statistical and mathematical techniques, is utilized to predict the global optimal solution based on the FEA calculated results of the detect forces for different combinations of factors. With the help of the combination computation the high capacity iron-core type PMLSM with more than 12000 N propulsion forces only contains less than 3 N detent forces.

  • PDF

Fast 3D reconstruction method based on UAV photography

  • Wang, Jiang-An;Ma, Huang-Te;Wang, Chun-Mei;He, Yong-Jie
    • ETRI Journal
    • /
    • 제40권6호
    • /
    • pp.788-793
    • /
    • 2018
  • 3D reconstruction of urban architecture, land, and roads is an important part of building a "digital city." Unmanned aerial vehicles (UAVs) are gradually replacing other platforms, such as satellites and aircraft, in geographical image collection; the reason for this is not only lower cost and higher efficiency, but also higher data accuracy and a larger amount of obtained information. Recent 3D reconstruction algorithms have a high degree of automation, but their computation time is long and the reconstruction models may have many voids. This paper decomposes the object into multiple regional parallel reconstructions using the clustering principle, to reduce the computation time and improve the model quality. It is proposed to detect the planar area under low resolution, and then reduce the number of point clouds in the complex area.

휴대폰 상에서 개인용 사진 컬렉션에 대한 자동 이벤트 군집화 방법 (Automatic Event Clustering Method for Personal Photo Collection on Mobile Phone)

  • 유정수;낭종호
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제16권12호
    • /
    • pp.1269-1273
    • /
    • 2010
  • 일반적으로 사용자는 휴대폰에서 촬영한 개인용 사진 컬렉션에 대하여 이벤트 기준으로 관리 및 접근하는 것을 선호한다. 본 논문에서는 휴대폰상의 개인용 사진 컬렉션에 대하여 계산 량이 적고 정확도가 높으며 증감적인 클러스터링을 지원하는 이벤트 클러스터링 알고리즘을 제안하였다. 제안한 방법은 실제 샘플 사진들을 수집하여 이벤트 내의 사진들의 시간 경과 치에 대한 통계적 분석을 통하여 이벤트 경계 구간을 결정하였으며, 시간 정보만으로 분할이 모호한 구간에서는 위치 정보와 시각 정보를 사용하여 보완하였다. 본 논문에서는 제안한 방법에 대하여 실험 및 검증을 수행하였으며, 기존의 일반적인 클러스터링 방법에 비하여 높은 성능을 나타내는 것을 확인하였다.

Robust Real-time Object Detection on Construction Sites Using Integral Channel Features

  • Kim, Jinwoo;Chi, Seokho
    • 국제학술발표논문집
    • /
    • The 6th International Conference on Construction Engineering and Project Management
    • /
    • pp.304-309
    • /
    • 2015
  • On construction sites, it is important to monitor the performance of construction equipment and workers to achieve successful construction project management; especially, vision-based detection methods have advantages for the real-time site data collection for safety and productivity analyses. Although many researchers developed vision-based detection methods with acceptable performance, there are still limitations to be addressed: 1) sensitiveness to the shape and appearance changes of moving objects in difference working postures, and 2) high computation time. To deal with the limitations, this paper proposes a detection algorithm of construction equipment based on Integral Channel Features. For validation, 16,850 frames of video streams were recorded and analyzed. The results showed that the proposed method worked in high performance in terms of accuracy and processing time. In conclusion, the developed method can help to understand useful site information including working pattern, working time and input manpower analyses.

  • PDF

차량 내·외부 데이터 및 딥러닝 기반 차량 위기 감지 시스템 설계 (A Design of the Vehicle Crisis Detection System(VCDS) based on vehicle internal and external data and deep learning)

  • 손수락;정이나
    • 한국정보전자통신기술학회논문지
    • /
    • 제14권2호
    • /
    • pp.128-133
    • /
    • 2021
  • 현재 자율주행차량 시장은 3레벨 자율주행차량을 상용화하고 있으나, 안정성의 문제로 완전 자율주행 중에도 사고가 발생할 가능성이 있다. 실제로 자율주행차량은 81건의 사고를 기록하고 있다. 3레벨과 다르게 4레벨 이후의 자율주행차량은 긴급상황을 스스로 판단하고 대처해야 하기 때문이다. 따라서 본 논문에서는 CNN을 통하여 차량 외부의 정보를 수집하여 저장하고, 저장된 정보와 차량 센서 데이터를 이용하여 차량이 처한 위기 상황을 0~1 사이의 수치로 출력하는 차량 내·외부 데이터 및 딥러닝 기반 차량 위기 감지 시스템을 제안한다. 차량 위기 감지 시스템은 CNN기반 신경망 모델을 사용하여 주변 차량과 보행자 데이터를 수집하는 차량 외부 상황 수집 모듈과 차량 외부 상황 수집 모듈의 출력과 차량 내부 센서 데이터를 이용하여 차량이 처한 위기 상황을 수치화하는 차량 위기 상황 판단 모듈로 구성된다. 실험 결과, VESCM의 평균 연산 시간은 55ms 였고, R-CNN은 74ms, CNN은 101ms였다. 특히, R-CNN은 보행자수가 적을 때 VESCM과 비슷한 연산 시간을 보이지만, 보행자 수가 많아 질수록 VESCM보다 많은 연산 시간을 소요했다. 평균적으로 VESCM는 R-CNN보다 25.68%, CNN보다 45.54% 더 빠른 연산 시간을 가졌고, 세 모델의 정확도는 모두 80% 이하로 감소하지 않으며 높은 정확도를 보였다.

A Lightweight and Privacy-Preserving Answer Collection Scheme for Mobile Crowdsourcing

  • Dai, Yingling;Weng, Jian;Yang, Anjia;Yu, Shui;Deng, Robert H.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제15권8호
    • /
    • pp.2827-2848
    • /
    • 2021
  • Mobile Crowdsourcing (MCS) has become an emerging paradigm evolved from crowdsourcing by employing advanced features of mobile devices such as smartphones to perform more complicated, especially spatial tasks. One of the key procedures in MCS is to collect answers from mobile users (workers), which may face several security issues. First, authentication is required to ensure that answers are from authorized workers. In addition, MCS tasks are usually location-dependent, so the collected answers could disclose workers' location privacy, which may discourage workers to participate in the tasks. Finally, the overhead occurred by authentication and privacy protection should be minimized since mobile devices are resource-constrained. Considering all the above concerns, in this paper, we propose a lightweight and privacy-preserving answer collection scheme for MCS. In the proposed scheme, we achieve anonymous authentication based on traceable ring signature, which provides authentication, anonymity, as well as traceability by enabling malicious workers tracing. In order to balance user location privacy and data availability, we propose a new concept named current location privacy, which means the location of the worker cannot be disclosed to anyone until a specified time. Since the leakage of current location will seriously threaten workers' personal safety, causing such as absence or presence disclosure attacks, it is necessary to pay attention to the current location privacy of workers in MCS. We encrypt the collected answers based on timed-release encryption, ensuring the secure transmission and high availability of data, as well as preserving the current location privacy of workers. Finally, we analyze the security and performance of the proposed scheme. The experimental results show that the computation costs of a worker depend on the number of ring signature members, which indicates the flexibility for a worker to choose an appropriate size of the group under considerations of privacy and efficiency.