• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.406-412
• /
• 2014

In this study, flat-tubular-type alumina filters were manufactured using alumina powder of two sizes ($2.4{\mu}m$ ALM-44 and $0.4{\mu}m$ AP 400) by an extrusion process. The manufactured alumina filter was sintered at $1200-1600^{\circ}C$ for 1 h. As particle size increased, the largest pore size, average pore size and porosity increased; but density and linear shrinkage decreased. The alumina filter fabricated using ALM-44 powder sintered at $1500^{\circ}C$ was confirmed as the best water treatment filter after investigation of the bending strength, water permeability and impurity-removal efficiency of the experimental filters. This flat-tubular-type alumina filter is expected to be useful not only for direct water treatment, but also for use as a support filter during coating processes, to control pore size.

• 재활복지공학회논문지
• /
• 제7권2호
• /
• pp.35-40
• /
• 2013

WBAN 환경에서 Master와 Node들의 에너지 효율을 관리하는 것은 매우 중요하다. 동시에 Master는 Node로부터 데이터를 수집하고 제어하는 중요한 역할을 함으로써 효과적인 에너지 소비를 유지하여 어떠한 상황에서도 대처할 수 있어야한다. 따라서 Master와 Node 사이의 적절한 저전력 MAC 프로토콜이 필요하다. 우리는 간단히 WBAN 슈퍼프레임 구조를 변경해줌으로써 더 향상된 MAC 프로토콜을 제안한다. 시뮬레이션 결과는 제안된 구조가 IEEE 802.15.6과 기존 연구와 비교해서 Master와 각 노드들의 에너지의 효율이득을 나타낸다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.64.2-64.2
• /
• 2010

The objective of this study is to make a comparative study of the operation performance of different type of solar collectors. A flat-plate collector, a single-glazed evacuated collector and a double-glazed evacuated collector are used in this study. These 3 type of collectors are connected in series in the order of a flat-plate collector, a single-glazed evacuated collector and a double-glazed evacuated collector. This experimental facility is a kind of a solar system with a controller, a heat exchanger, a storage tank and a circulation pump. Each collector has a different collection area(flat-plate collector-$6.00m^2$ total area/$5.61m^2$ aperture area, double-glazed evacuated collector-$6.04m^2$ total area/$4.92m^2$ aperture area, single-glazed evacuated collector-$7.65m^2$ total area/$5.61m^2$ aperture area) and its performance characteristic respectively. The experiments have been demonstrated at around $70^{\circ}C$ operating temperature(flat-plate collector inlet temperature). The thermal collecting efficiencies of each collector are obtained under the different insolation and operation condition as a result.

• 한국전자통신학회논문지
• /
• 제12권3호
• /
• pp.493-498
• /
• 2017

최근 국내 외에서 버스운행의 효율화 및 D2D(: Door to Door)서비스, 대중교통의 자율주행을 위해 교통데이터를 분석하여 다양한 분석결과를 도출해내고 있다. 하지만 대중교통, 특히 버스 지연시간의 예측을 위해 다양한 연구가 수행되고 있으나 단순분석, 데이터 취득의 한계로 현재까지의 연구는 미흡한 상태이다. 본 연구에서는 버스의 운행정보를 기반으로 요일, 날씨, 시간대 등의 데이터를 추가적으로 수집 가공하여 지연시간 추정을 수행하였다. 본 논문에서 제안하는 방법은 향후 변수를 추가하여 정확도를 향상시킴으로써 자율주행 대중교통 및 대중교통 관제시스템에 활용이 가능하다.

• 한국실내디자인학회논문집
• /
• 제27권2호
• /
• pp.37-44
• /
• 2018

This research aims to suggest the composition of multi-functional furniture for single households, responding to the changes of consumption pattern caused by the recent trends of the single-person household living in a small residential space. It is expected that a multi-functional furniture for single households in the current context should be increased the efficiency of spaces. Using a customized questionnaire, we examined the preferences of multi-functional furniture composition for single households. A questionnaire was developed by collecting images using key words related to multi-functional furniture and analyzing the final images by multi-functionality, furniture classification system and behavior. The most preferred multi-functional furniture composition are counter-tops and chest of drawers, followed by chest of drawers and beds, counter-tops and tableware, lighting and beds, closets and drawers. This research contributes significantly in that it suggests the basic data of optimized flexible multi-functional furniture design for single-person household by linking various behaviors and furniture in the house.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.348-348
• /
• 2016

Low dark current (off-current) and high photo current are both essential for a solution processed organic photodetector (OPD) to achieve high photo-responsivity. Currently, most OPDs utilize a bulk heterojunction (BHJ) photo-active layer that is prepared by the one-step deposition of a polymer:fullerene blend solution. However, the BHJ structure is the main cause of the high dark current in solution processed OPDs. It is revealed that the detectivity and spectral responsivity of the OPD can be improved by utilizing a photo-active layer consisting of an interdiffused polymer/fullerene bilayer (ID-BL). This ID-BL is prepared by the sequential solution deposition (SqD) of poly(3-hexylthiophene) (P3HT) and [6,6] phenyl C61 butyric acid methyl ester (PCBM) solutions. The ID-BL OPD is found to prevent undesirable electron injection from the hole collecting electrode to the ID-BL photo-active layer resulting in a reduced dark current in the ID-BL OPD. Based on dark current and external quantum efficiency (EQE) analysis, the detectivity of the ID-BL OPD is determined to be $7.60{\times}1011$ Jones at 620 nm. This value is 3.4 times higher than that of BHJ OPDs. Furthermore, compared to BHJ OPDs, the ID-BL OPD exhibited a more consistent spectral response in the range of 400 - 660 nm.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권2호
• /
• pp.149-153
• /
• 2017

Objective: This study was to determine the relationship between estimated breeding value and phenotype information after farrowing when juvenile selection was made in candidate pigs without phenotype information. Methods: After collecting phenotypic and genomic information for the total number of piglets born by Landrace pigs, selection accuracy between genomic breeding value estimates using genomic information and breeding value estimates of best linear unbiased prediction (BLUP) using conventional pedigree information were compared. Results: Genetic standard deviation (${\sigma}_a$) for the total number of piglets born was 0.91. Since the total number of piglets born for candidate pigs was unknown, the accuracy of the breeding value estimated from pedigree information was 0.080. When genomic information was used, the accuracy of the breeding value was 0.216. Assuming that the replacement rate of sows per year is 100% and generation interval is 1 year, genetic gain per year is 0.346 head when genomic information is used. It is 0.128 when BLUP is used. Conclusion: Genetic gain estimated from single step best linear unbiased prediction (ssBLUP) method is by 2.7 times higher than that the one estimated from BLUP method, i.e., 270% more improvement in efficiency.

• 디지털융복합연구
• /
• 제10권1호
• /
• pp.371-378
• /
• 2012

센서 네트워크에서는 센서 노드를 통해 개체에 대한 행위, 조건, 위치에 관한 정보를 원격으로 얻을 수가 있다. 일반적으로 센서 노드는 배터리를 이용한 전원 공급이 이루어지므로 매우 제한적이다. 따라서 센서 데이터를 수집하기 위한 효율적인 에너지 관리는 전체 네트워크의 생존기간을 연장하기 위해 필요하다. 본 논문에서는 분산된 센서 노드를 클러스터단위로 자가구성하여 에너지 효율성을 높이는 방법을 제안한다. 제안된 방법은 ANTCLUST를 기반으로 두 개체간의 유사도를 측정한 후 해당 클러스터를 알아내어 자신의 클러스터를 결정하는 방법이다. 제안된 방법은 개미의 colonial closure 모델을 적용한다. 실험결과 기존의 클러스터링 방법보다 27%의 생존 노드 수의 증가를 보였다.

• 한국전자거래학회지
• /
• 제16권3호
• /
• pp.113-127
• /
• 2011

RFID 시스템은 초기 공급사슬관리 영역에서 다양한 영역으로 확산되고 있다. 의료분야 또한 환자, 의료진, 의료기기 등의 위치추적 관리 의약품 추적관리 등의 영역에 RFID 시스템 도입을 진행하고 있다. 본 연구는 외래병원에서 태그의 위치추적을 위한 수동형 RFID 기술기반의 시스템 구축 사례를 4계층의 시스템 구조를 활용하여 분석하였다. 특히 일반적으로 수동형 RFID 기술에서 경험하는 불안정한 인식 데이터 문제를 해결하기 위하여 두 계층으로 구성된 데이터 처리 절차를 제시하였다. 본 논문에서 제시한 데이터 처리 절차를 실제사례에서 취합한 데이터에 적용하여 태그의 위치를 정확하게 파악하고 추가적인 업무 정보를 도출하는 것이 가능함을 확인하였다. 마지막으로 보다 안정적이고 효과적인 RFID 시스템 구축을 위하여 사례분석에서 경험한 추가적인 논의사항과 연구방향을 제시하였다.

• International Journal of Contents
• /
• 제7권1호
• /
• pp.8-13
• /
• 2011

For energy-efficiency in Wireless Sensor Networks (WSNs), when a sensor node detects events, the sensing period for collecting the detailed information is likely to be short. The lifetime of WSNs decreases because communication modules are used excessively on a specific sensor node. To solve this problem, the TARP decentralized network packets to neighbor nodes. It considered the average data transmission rate as well as the data distribution. However, since the existing scheme did not consider the energy consumption of a node in WSNs, its network lifetime is reduced. In this paper, we propose an energy awareness congestion control scheme based on genetic algorithms in WSNs. The proposed scheme considers the remaining amount of energy and the transmission rate on a single node in fitness evaluation. Since the proposed scheme performs an efficient congestion control, it extends the network lifetime. In order to show the superiority of the proposed scheme, we compare it with the existing scheme through performance evaluation. It is shown that the proposed scheme enhances the data fairness and improves the network lifetime by about 27% on average over the existing scheme.