• 제목/요약/키워드: cold-pressed

검색결과 62건 처리시간 0.011초

산성백토를 이용한 저온압착 유채유의 탈색 평가 (Bleaching of cold-pressed rapeseed oil using activated clay)

  • 이영화;박원;이태성;김광수;장영석;이경보
    • 한국응용과학기술학회지
    • /
    • 제33권3호
    • /
    • pp.560-567
    • /
    • 2016
  • 최근 건강기능성 식용유에 대한 선호도가 높아지면서 저온압착(cold-pressing) 유채유에 대한 관심이 증대되고 있다. 저온압착 유채유는 정제유에 비해 기름 고유의 맛과 향을 느낄 수 있는 장점이 있다. 본 연구에서는 산성백토를 이용한 저온압착 유채유의 탈색과정에서 산성백토의 첨가량, 처리시간 및 반응온도에 따른 탈색 후 이화학적 특성과 품질특성을 분석하고자 하였다. 이화학적 특성으로 색차(명도, 적색도, 황색도)를 조사하였고, 품질특성은 chlorophyll-A 와 carotenoid 함량, 지방산 조성, 토코페롤(${\alpha}$, ${\beta}$, ${\gamma}$, ${\delta}$), 및 식물성 스테롤(${\beta}$-sitosterol, campesterol, stigmasterol)을 분석하였다. 먼저 산성백토(DC-SUPER)의 첨가량(1, 2, 3%)에 따른 저온압착 유채유의 색도변화를 관찰한 결과, DC-SUPER 첨가량 2%에서 탈색 1시간 후 유채유의 색도가 갈색에서 연노랑으로 옅어졌다. 본 결과를 바탕으로 총 3종의 산성백토(DC-SUPER, DC-A3, 및 P1)에 대해 첨가량 2%를 기준으로 처리시간(20, 40, 60, 80분) 증가에 따른 색차를 조사한 결과, 처리시간 20분 경과 후부터 대조구 대비 명도(L)는 증가하였고, 적색도(a)와 황색도(b)는 감소하는 경향을 보였다. 또한 산성백토 DC-SUPER 2% 첨가 후, 반응온도(40, 80, $120^{\circ}C$) 증가에 따른 색차를 조사한 결과, L값과 a값은 큰 변화를 보이지 않았으나, b값은 급격히 감소하는 경향을 보였다. 특히, 반응온도 $40^{\circ}C$에서 처리시간 20분 이내에 클로로필 A와 카로티노이드는 대부분 제거되었고, 토코페롤 함량도 현저히 감소하였다. 탈색 전 저온압착 유채유의 총 토코페롤 함량은 46.62mg/100g이나, 탈색 후 총 토코페놀은 12.67mg/100g(20분 탈색), 15.31mg/100g(40분 탈색), 13.56mg/100g(60분 탈색)로 나타나, 약 50% 이상 감소하였다. 탈색 후 ${\alpha}$-토코페롤과 ${\delta}$-토코페롤의 함량 감소가 매우 컸고, ${\gamma}$>${\beta}$>${\alpha}$>${\delta}$-토코페롤의 순으로 포함되어 있었다. 하지만 탈색 전 후에 저온압착 유채유의 식물성 스테롤 함량은 큰 변화가 없었다. 따라서 본 연구에서는 산성백토 이용 저온압착 유채유 탈색시 색도를 향상시킴을 확인하였으며, 영양학적으로 우수한 총 토코페롤 등이 감소한 바 향후 이를 보완 할 수 있는 연구가 필요하다.

볶음조건과 저온압착이 아마씨유(Linum usitatissimum L.)의 지방산 조성 및 휘발성 성분에 미치는 영향 (Effect of Roasting Condition and Cold-pressed Flaxseed (Linum usitatissimum L.) oil on Fatty Acid Composition and Volatile Compound)

  • 원새봄
    • 융합정보논문지
    • /
    • 제10권11호
    • /
    • pp.177-184
    • /
    • 2020
  • 본 연구는 불포화지방산 중 α-리놀렌산이 풍부한 아마씨에서 볶음조건과 저온압착법으로 착유된 아마씨유의 화학적 변화에 미치는 영향을 조사하고자 하였다. 볶지 않은 아마씨와 볶은 아마씨(150℃와 200℃에서 10분과 20분)를 가정용 저온압착기를 사용하여 저온압착으로 착유하여 착유수율, 총 페놀 함량, 지방산 조성 및 휘발성 성분을 분석하였다. 착유수율은 볶지 않은 아마씨에서보다 볶은 아마씨에서 높게 나타났다. 총 페놀 함량은 150℃에서 20분 동안 볶아서 착유한 경우 다른 착유군보다 유의적으로 높은 반면, 200℃에서 착유한 경우는 볶지 않은 생 아마씨유보다 낮았다. 지방산의 조성은 볶음조건에 의해서 차이를 보이지 않았다. 휘발성 성분은 총 함량과 지방산패의 지표로 알려진 aldehyde, ketone, furan은 볶음온도와 시간이 증가됨에 따라서 증가되었고, Maillard 반응에 영향을 주는 pyrazine도 200℃에서 볶아서 착유한 아마씨유에서 증가하였다. 결과적으로 가정용 저온압착기로 착유된 아마씨유는 볶지 않은 아마씨보다는 150℃에서 20분 동안 볶은 후 저온압착으로 착유하는 방법이 안전한 추출과정으로 제안된다.

Comparison of the Cold-Pressed Peel Oil Composition between ]Korean and Japanese Satsuma Mandarin (Citrus unshiu Marcov. forma Miyagawa-wase) by GC, GC-MS and GC-O

  • Park, Hyang-Sook;Sawamura, Masayoshi
    • Preventive Nutrition and Food Science
    • /
    • 제7권1호
    • /
    • pp.5-11
    • /
    • 2002
  • The comparison of the volatile flavor components from Korean and Japanese Satsuma mandarin (C. unshiu Marcov. forma Miyagawa-wase) peel oils, isolated by cold-pressing, was performed by gas chromatography, mass-spectrometry and gas chromatography-olfactometry (GC-O). Eighty-five volatile components were identified in each oil by GC and GC-MS. Forty-three components were detected in each oil by GC-O. The total amount of monoterpene hydrocarbons was 95.88% (Korean mandarin) and 95.29% (Japanese mandarin). Limonene, ${\gamma}$-terpinene, myrcene and $\alpha$-pinene were the main components of the cold-pressed oils from the both samples. The volatile composition of the Japanese mandarin was characterized by a higher content of sesquiterpene hydrocarbons, especially bicyclogermacrene, $\alpha$-humullene and valencene. The volatile composition of two samples can easily be distinguished by the percentages of aldehydes, ketones and esters, which were found at higher levels in the Japanese mandarin. The sweet and fruity flavor was stronger in the Korean mandarin oil while herbaceous flavor was stronger in Japanese sample. From GC-O data it is suggested that the sweet and fruity flavor of the Korean mandarin resulted from terpinolene and linalool, and the herbaceous note of the Japanese mandarin from $\alpha$-humullene, nepal, ι-carvone and perill aldehyde.

Effects of Single Cell Products of Apple on Stimulating Various Functions of Murine Peritoneal Macrophages

  • Choi, In-Wook;Cho, Ga-Young;Kim, Seung-Hyun;Park, Yong-Gon
    • Food Science and Biotechnology
    • /
    • 제15권3호
    • /
    • pp.347-350
    • /
    • 2006
  • The objective of this study was to investigate the possible effects of oral administration of single cell products (SCP) of apple on activating peritoneal macrophages. Apples were processed either for cold-pressed juice or SCP, which were produced by incubating sliced apples with a protopectinase, Sumyzyme MC. Both cold-pressed juice and SCP of apple were administered to C57BL/6 mice for 10 days to compare their efficacy, along with the control group, in stimulating peritoneal macrophages. The viability of macrophages was significantly increased by up to 161% of that of the control following the administration of apple SCP, whereas the viability of macrophages was increased to a lesser extent of up to 143% in the apple juice (AJ) administered group. Administration of apple SCP also induced a significantly higher production of $H_2O_2$ from macrophages (317% of the control) than that of cold-pressed AJ (210%). Although nitric oxide (NO) production was not increased by the administration of either AJ or SCP, the latter slightly but significantly increased tumor necrosis factor-${\alpha}$ ($TNF-{\alpha}$) production from macrophages from 560.4 to 579.8 pg/mL. The results of this study suggest that administering SCP is more efficient than administering AJ to stimulate functions of peritoneal macrophages.

Effects of a compaction method for powder compacts on the critical current density of MgB2 bulk superconductors

  • Kang, M.O.;Joo, J.;Jun, B.H.;Choo, K.N.;Kim, C.J.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제21권2호
    • /
    • pp.40-44
    • /
    • 2019
  • In this study, the effects of the compaction method for (Mg+2B) powders on the apparent density and superconducting properties of $MgB_2$ bulk superconductor were investigated. The raw powders used in this study were nano-sized boron (B) and spherical magnesium (Mg). A batch of a powder mixture of (Mg+2B) was put in a steel mold and uniaxially pressed at 1 ton or 3 tons into pellets. Another batch of the powder mixture was uniaxially pressed at 1 ton and then pressed isostatically at $1800kg/cm^2$ in the water chamber. All pellets were heat-treated at $650^{\circ}C$ for 1 h in flowing argon gas for the formation of $MgB_2$. The apparent density of powder compacts pressed at 3 ton was higher than that at 1 ton. The cold isostatic pressing (CIP) in a water chamber allowed further increase of the apparent density of powder compacts, which influenced the pellet density of the final products ($MgB_2$). The compaction methods (uniaxial pressing and CIP) did not affect the formation of $MgB_2$ and superconducting critical temperature ($T_c$) of $MgB_2$, but affected the critical current density ($J_c$) of $MgB_2$ significantly. The sample with the high apparent density showed high $J_c$ at 5 K and 20 K at applied magnetic fields (0-5 T).

IMPROVEMENT OF FATIGUE LIFE IN POST-WELD COLD WORKED ALUMINUM RESISTANT SPOT WELDS

  • Kim, D.;Blake, D.M.;Ryu, S.J.;Lim, B.S.
    • International Journal of Automotive Technology
    • /
    • 제7권5호
    • /
    • pp.579-584
    • /
    • 2006
  • Aluminum Resistance Spot Weld(Al RSW) is an enabling technology for body assembly of low mass fraction vehicles. Due to the unreliable durability of spot-welded joints, applications of Al RSW are limited. This study presents experimental investigation on the use of a post-weld cold working process to improve the fatigue strength of Al RSW. The post-weld cold working process includes special shaped indenters that are pressed or driven into the structure to induce compressive residual stresses. The mechanical properties of the post-weld cold worked Al RSW were investigated, including the experimental results of fatigue and micro-hardness tests. Comparisons of the mechanical properties and qualitative results between the as-welded RSW specimens and the post-weld cold worked RSW specimens are discussed. The post-weld cold worked Al RSW samples had an increase in both microhardness and fatigue life.

상압소결법에 의해 제조한 $\alpha$-SiC의 소결온도에 따른 상전이와 기계적 특성 (Phase Transformation and Mechanical Properties on Sintering Temperature of $\alpha$-SiC Manufactured by Pressureless Sintering)

  • 주진영;신용덕;박미림;이종덕
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.431-434
    • /
    • 2001
  • The mechanical and phase transformation of the cold isostatically pressed $\alpha$-SiC ceramic were investigated as a function of the sintering temperature. The result of phase analysis by XRD revealed 6H, 4H, 3C and phase transformation between 6H and 4H showed a sudden change over 200$0^{\circ}C$. However, the alongrightarrow$\beta$ reverse transformation did not occur to any sintering temperature. The relative density and the mechanical properties of $\alpha$-SiC ceramic was increased with increased sintering temperature. The flexural strength rapidly inclosed below 210$0^{\circ}C$ and showed the highest value of 410 MPa at 220$0^{\circ}C$. This reason is because crack was propagated through surface flaw. The fracture toughness showed the highest value of 3.3 MPa.m$_{1}$2/ at 220$0^{\circ}C$.

  • PDF

RF 스퍼터링용 Hydroxyapatite 타겟의 제조 및 Hydroxyapatite/Ti-6Al-4V 합금 박막의 특성(I) (The Fabrication of Hydroxyapatite Targets and the Characteristics of Hydroxyapatite/Ti-6Al-4V Alloy Thin Films by RF Sputtering(I))

  • 정찬회;김명한
    • 한국재료학회지
    • /
    • 제13권4호
    • /
    • pp.205-212
    • /
    • 2003
  • RF sputtering process was applied to produce thin hydroxyapatite[HA, Ca10($PO_4$)$_{6}$ $ (OH)_2$films on Ti-6Al-4V alloy substrates. To make a 101.6 mm dia.${\times}$5 mm HA target, the commercial HA powder was first calcinated for 3h at $200^{\circ}C$. A certain amount of the calcinated HA powder was pressed under a pressure of 20,000 psi by the cold isostatic press(CIP) and the pressed HA target was sintered for 6 h at $1,200^{\circ}C$. The effects of different heat treating conditions on the bonding strength between HA thin films and Ti-6Al-4V alloy substrates were studied. Before deposition, the alloy substrates were annealed for 1 h at $850^{\circ}C$ under $3.0${\times}$10^{-3}$ Xtorr, and after deposition, the hydroxyapatite/Ti-6Al-4V alloy thin films were annealed for 1 h at 400, 600 and $800^{\circ}C$ under the atmosphere, respectively. Experimental results represented that the HA thin films on the annealed substrates had higher hardness than non-heat treated substrates before the deposition.

Modeling the growth of Listeria monocytogenes during refrigerated storage of un-packaging mixed press ham at household

  • Lee, Seong-Jun;Park, Myoung-Su;Bahk, Gyung-Jin
    • Journal of Preventive Veterinary Medicine
    • /
    • 제42권4호
    • /
    • pp.143-147
    • /
    • 2018
  • The present study aimed to develop growth prediction models of Listeria monocytogenes in processed meat products, such as mixed pressed hams, to perform accurate microbial risk assessments. Considering cold storage temperatures and the amount of time in the stages of consumption after opening, the growth of L. monocytogenes was determined as a function of temperature at 0, 5, 10, and $15^{\circ}C$, and time at 0, 1, 3, 6, 8, 10, 15, 20, 25, and 30 days. Based on the results of these measurements, a Baranyi model using the primary model was developed. The input parameters of the Baranyi equation in the variable temperature for polynomial regression as a secondary model were developed: $SGR=0.1715+0.0199T+0.0012T^2$, $LT=5.5730-0.3215T+0.0051T^2$ with $R^2$ values 0.9972 and 0.9772, respectively. The RMSE (Root mean squared error), $B_f$ (bias factor), and $A_f$ (accuracy factor) on the growth prediction model were determined to be 0.30, 0.72, and 1.50 in SGR (specific growth rate), and 0.10, 0.84, and 1.35 in LT (lag time), respectively. Therefore, the model developed in this study can be used to determine microorganism growth in the stages of consumption of mixed pressed hams and has potential in microbial risk assessments (MRAs).