• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.34-43
• /
• 1994

In order to improve thickness profile of cold rolled steel strip, a computer simulation and actual cold rolling experiments on a 4-high tandem cold mill were carried out. In this study, tapered barrel end at top work roll and incurved barrel body at bottom work roll were examined for reducing edge drop and threading of stripe. Also, the most effective stand of tandem cold mill and magnitude of optimal taper crown at several stand were investigated under a typical rolling condition. From actual rolling experiments, it was verified that thickness deviation over strip width could be improved up to 1.06% by applying tapered and incurved work roll only at the second and up to 0.89% by applying them at both the second and the third stand.

• 대한약침학회지
• /
• 제27권3호
• /
• pp.199-210
• /
• 2024

Objectives: Few studies have examined the impact of healthy sleep among general workers on individuals and society. Therefore, the status and risk factors of sleep disturbances among general workers were investigated. In addition, this study assessed the degree to which cold and heat symptoms are associated with sleep disturbances. Methods: A nationwide cross-sectional study was conducted through an online questionnaire focused on sleep disturbances of the general public in 2021. The degree of cold-heat pattern Identification (CHPI) of the general public was also surveyed. Descriptive statistics and multivariate logistic regression were used to derive the study results. Results: Data from 2,822 workers out of 3,900 valid questionnaires were analyzed. Approximately half of the respondents (49.93%) had sleep disturbances. Among the types of work, self-employed, two-shift work, and working more than 53 hours were associated with sleep disturbances. Sleep disturbances were positively associated with six cold and heat symptoms: three cold symptoms (coldness of the abdomen, coldness of body, and pale face) and three heat symptoms (body feverishness, feverishness of the limbs, and drinking cold water). Conclusion: Customized policies to maintain healthy work are needed for self-employed work, two-shift work, and long working hours, which are risk factors for workers' sleep disturbances. In addition, medical personnel can effectively diagnose and treat sleep disturbances considering the worker's cold and heat symptoms.

• Nuclear Engineering and Technology
• /
• 제8권3호
• /
• pp.151-157
• /
• 1976

냉간가공한 질칼로이-4의 가공시효(strain ageing) 현상이 진공속에서 변형온도 및 1143ppm-3500ppm의 산소 함량의 변수로써 조사되었다. 가공시효 현상이 0-10 % 냉간가공한 질칼로이-4의 경우 200-45$0^{\circ}C$의 온도구간에서 조사되었으며, 이때 가공시효 현상은 냉간가공량이 증가할수록 감소하는 현상을 보였다. 이 냉간가공에 따른 가공시효의 감소는 냉간가공시 발생한 결함에 의해 산소 원자들이 trapping 되는 결과로 기인된 것으로 고려된다. 냉간가공된 질칼로이-4의 최대 가공시효 응력은 함유된 산소의 량의 평방근에 비례한다는 사실이 밝혀졌다.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1149-1157
• /
• 1995

The research for variation of coolant film thickness and separating force has been investigated following the examination for friction profile of work roll and roughness change of strip surface in rolling mill producting actual commercial products. The obtained results are as follows ; (1) Coolant film thickness in cold rolling has been increased relative to the circumferential velocity of work roll, and formation of coolant films has decreased with the smaller diameter of work roll. (2) Separating force is related to the formation of coolant film, and large separating force is needed to the formation of coolant film but it is constant after formation of appropriate film. (3) Wear and roughness alleviation of work roll is larger in bottom-roll than in top-roll on cold surface is larger in the direction of width than in roll direction, and changes of roughness and strip surface hardness rarely occurred after 3 passes.

• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.616-621
• /
• 2003

There are various Non-Destructive Evaluation (NDE) techniques used for measurement of residual stresses in material, such as magnetic methods, X-ray diffraction, Ultrasonic velocity measurement etc. The capabilities, applications and limitations of these techniques for evaluation of cold work/plastic deformation were studied and compared. Mild steel plates were subjected to different degree of cold deformation and were analyzed by Magneto-mechanical Acoustic Emission (MAE), Barkhausen Noise (BN) and magnetic properties (hysteresis loop parameters analysis). Further, these specimens were analyzed by X-ray diffraction and ultrasonic velocity measurements. The microhardness measurement and microstructure studies of these cold worked plates were also carried out. The results of all these studies and comparison of different techniques are discussed in this paper.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.281-285
• /
• 2008

냉간단조금형(Cold Forging Die)의 다이블록(Dieblock)을 제작하는 방법 중의 하나로, 다이블록 제작용 재료를 면가공 하여 다이블록 상면(上面)을 마스터펀치(Master Punch)인 호브(Hob)로 압입(Indentation) 시켜 절삭가공((Cutting Work)이 아닌 다이호빙(Die Hobbing) 방법으로 임프레션(Impression)을 성형하여 제작하고 있다. 이 방법에 의하여 다이블록의 재료를 합금공구강(Alloy Tool Steel)인 SKD11을 사용하여 제작하고, 스테인리스판(Stainless Sheet Metal)을 제품 재료로 하여 냉간단조가공(Cold Forging Work)을 수행하였더니 6,000 스트로크(Stroke)에서 금형수명(Die Life)을 다 하고 파손되었다. 본 논문에서는 다이블록 재료를 고속도공구강(High Speed Tool Steel)인 SKH51로 교체 제작하고, 탄소강(Carbon Steel)인 S45C를 제품 재료로 하여 냉간단조가공을 수행하였더니 21,000 스트로크에서 금형수명을 다하고 파손되어 종래의 방법과 비교 검토하였을 때 350%의 금형수명 연장 효과를 얻게 되었다.

• Computers and Concrete
• /
• 제22권3호
• /
• pp.319-326
• /
• 2018

RC (Reinforced Concrete) members are always subjected to loading conditions and have construction joints when constructed on a big scale. Service life for RC structure exposed to chloride attack is usually estimated through chloride diffusion test in sound concrete, however the test is performed without consideration of effect of loading and joint. In the present work, chloride diffusion coefficient is measured in concrete cured for 1 year. In order to evaluate the effect of applied load, cold joint, and mineral admixtures, OPC (Ordinary Portland Cement) and 40%-replaced GGBFS (Ground Granulated Blast Furnace Slag) concrete are prepared. The diffusion test is performed under loading conditions for concrete containing cold joint. Investigating the previous test results for 91 days-cured condition and the present work, changing diffusion coefficients with applied stress are normalized considering material type and cold joint. For evaluation of service life in RC continuous beam with 2 spans, non-linear analytical model is adopted, and service life in each location is evaluated considering the effects of applied stress, cold joint, and GGBFS. From the work, varying service life is simulated under various loading conditions, and the reduced results due to cold joint and tensile zone are quantitatively evaluated. The effect of various conditions on diffusion can provide more quantitative evaluation of chloride behavior and the related service life.

• 사상체질의학회지
• /
• 제33권1호
• /
• pp.1-21
• /
• 2021

Objective The purpose of this study was to examine the correlation between the Cold-damage Six-meridian disease of Qibo (岐伯六經病證) and Sasang Constitutional Symptomatology (四象體質病證), presented in Discourse on the Origin of Eastern Medicine (醫源論) of Longevity and Life Preservation in Eastern Medicine (Donguisusebowon, 東醫壽世保元). Method The process of development from Cold-damage Six-meridian disease of Qibo (岐伯六經病證) to Six Meridians Physical Symptoms and Medicines (六經形證用藥) in the chapter Cold(寒門) of the Treasure Mirror of Eastern Medicine (Donguibogam, 東醫寶鑑) was investigated. And the correlation between Six Meridians Physical Symptoms and Medicines (六經形證用藥) and Sasang Constitutional Symptomatology (四象體質病證) was considered. Results and Conclusions 1. The Cold-damage Six-meridian disease of Qibo (岐伯六經病證) in the chapter Heat Treatise (熱論篇) of Basic Questions (素問) had evolved into Six Meridians Physical Symptoms and Medicines (六經形證用藥) in the chapter Cold(寒門) of the Treasure Mirror of Eastern Medicine (Donguibogam, 東醫寶鑑) through Book for Life Saving (Huorenshu, 活人書), a work of Zhu Gong (朱肱), Six Books on Cold Damage disease (Shanghanliushu, 傷寒六書), a work of Tao Hua (陶華) and Introduction to Medicine (YixueRumen, 醫學入門), a work of Li Chan (李梴). 2. The correlation between the Cold-damage Six-meridian disease of Qibo (岐伯六經病證) and Sasang Constitutional Symptomatology (四象體質病證) can be analyzed and understood through Six Meridians Physical Symptoms and Medicines (六經形證用藥) in the chapter Cold(寒門) of the Treasure Mirror of Eastern Medicine (Donguibogam, 東醫寶鑑). 3. Greater Yang meridian disease of Qibo (岐伯) is related to Soyangin early stage of Lesser-Yang Wind-Injury symptomatology and Soyangin early stage of Chest-Heat symptomatology, Yang Brightness meridian disease and Greater Yin meridian disease to Taeeumin Liver-Heat symptomatology, Lesser Yin meridian disease to Soyangin Chest-Heat symptomatology, Lesser Yang meridian disease to Soyangin early stage of Lesser-Yang Wind-Injury symptomatology and Reverting Yin meridian disease to Soeumin Reverting Yin symptomatology of Greater Yang disease.

• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.207-216
• /
• 2003

By using the electrochemical method, the relation between the deformation and the geometrical shape, and the effect of cold work on hydrogen absorption-desorption cycling in palladium were investigated, In order to study this problem, four kinds of the Pd specimens used were plates and bars as cold worked and annealed states. As results, it is found that the deformation of thickness direction in the palladium plates increased whereas other lateral directions decreased. But the palladium bars showed the same deformation ratio in all directions because of uniform distribution of the $\beta$ phase. Grains in the plate specimens were greatly deformed after hydrogenation cycling whereas grains in the bar specimens were pulverized. Also, deterioration of the hydrogen absorption rate of the bar specimen was larger than the plate specimen. And the effect of cold work on hydrogen absorption capacity was relatively small.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1909-1923
• /
• 2021

We experimentally investigated the effects of thermal aging and cold work on the microstructure, mechanical properties, and primary water stress corrosion cracking (PWSCC) initiation time for Alloy 182 welds. The effects of thermal aging and cold work on the PWSCC initiation time of Alloy 182 were modeled based on the plastic energy concept and the PWSCC initiation data of this study and previous reports by considering censored data. Based on the results, it is estimated that the PWSCC resistance of the Alloy 182 weld firstly increases and then decreases with thermal aging time when the applied stress is kept constant.