• 한국축산식품학회지
• /
• 제38권2호
• /
• pp.251-258
• /
• 2018

We investigated microbial and quality changes in wrap-packaged dry-aged beef after completion of aging and subsequent storage in a refrigerator. After 28 days of dry aging (temperature, $4^{\circ}C$; RH, approximately 75%; air flow velocity, 2.5 m/s), sirloins were trimmed, wrap-packaged, and stored at $4^{\circ}C$ for 7 days. Analyses of microbial growth, pH, volatile basic nitrogen (VBN), 2-thiobarbituric acid-reactive substance (TABRS), and instrumental color, myoglobin, and sensory evaluation were conducted on days 0, 3, 5, and 7. The results show that the number of total aerobic bacteria (TAB), yeast, and lactic acid bacteria increased with an increase in storage days, whereas no change in the growth of mold was observed during 7 days of storage. Based on the legal standard for TAB count, the estimated shelf-life of wrap-packaged dry-aged beef was predicted to be less than 12.2 days. However, the shelflife should be less than 6.3 days, considering the result of sensory quality (odor, taste, and overall acceptance). No significant change in visible appearance was also observed during 7 days of storage. The results suggest that the present quality indicators for meat spoilage (pH, VBN, and TBARS) should be re-considered for dry-aged beef, as its characteristics are different from those of fresh and/or wet-aged beef.

• 한국식품영양과학회지
• /
• 제26권5호
• /
• pp.827-830
• /
• 1997

Sensory evaluation method was used to develop a type jujube tea the organoleptic properties were evaluated with regard to the optimum sugar content, clarity, drinking temperature and fruit pulp content of the jujube tea. Clarified jujube tea extracted from 25% by weight of dry jujube fruits and 75% water was preferred to those from 15%, 20% and 30% jujube fruites although those from 20% and 30% were not significantly different at 5%level. In spite of the average acceptability score of cloudy jujube tea with 5% of added fruit pulp was not significantly different from that of clarified one, the more fruit pulp in the tea products the worse its acceptability. Cold jujube tea was preferred to warm and hot ones, but these were not significantly different.

• 환경영향평가
• /
• 제32권6호
• /
• pp.473-487
• /
• 2023

1970~1980년대 준공된 우리나라의 다목적댐 저수지에는 발전방류를 위한 고정식 취수구가 심층에 설치되어 있어 일부 댐 하류에서는 냉수 방류에 의한 농작물 냉해, 안개 일수 증가 등의 문제점이 제기된 바 있다. 본 연구에서는 고정식 취수구를 통해 심층 취수가 이루어지고 있는 합천호를 대상으로 취수 수심이 저수지의 수온 성층 구조와 방류 수온에 미치는 영향을 분석하였다. 3차원 수리수질모형인 AEM3D를 이용하여 합천호의 연직 수온 분포를 재현하고 계절별 수온성층 구조를 분석하였으며, 수문 조건에 따른 수온성층 변화를 비교 분석하기 위하여 풍수해와 갈수해를 대상으로 모델링 하였다. 또한 취수심 변경 시나리오를 적용함으로써 취수 수심이 수온성층 구조에 미치는 영향을 분석하였다. 모의 결과 심층 취수를 표층 취수로 변경할 경우 수온약층의 형성 위치가 풍수해 6.5 m, 갈수해 6.8 m 감소하여 더 얕은 수심에 형성될 것으로 분석되었다. 또한 수체 안정도 지수인 Schmidt Stability Index (SSI)와 Buoyancy frequency (N²)가 증가하여 수온성층 강도가 증가하는 것으로 나타났다. 표층 취수시 연평균 방류수온이 풍수해 3.5℃, 갈수해 5.0℃ 증가하여 하류하천의 영향은 감소하나, 호내의 저수온층 수체적과 수온성층 강도가 증가하므로 추후 수질관리를 위해 취수심을 댐 운영의 주요인자로 고려해야 할 것으로 판단된다.

• 한국식품과학회지
• /
• 제47권2호
• /
• pp.224-232
• /
• 2015

CP 처리의 CBPE 필름의 물리화학적 특성 및 생분해 특성에 대한 영향을 연구하였다. CP 처리는 CBPE 필름의 인장 강도, 신장률, 그리고 광투과도와 같은 물리적 특성에는 영향을 주지 않았으나, air-CP 처리는 CBPE 필름의 유연성, 수분 방벽 특성, 그리고 인쇄적성을 향상시켰다. Air-CP 처리는 저장 중 CBPE 필름 표면의 조도와 O와 N 원소를 포함한 작용기의 양을 증가시켰고, 인쇄적성, 열분해성, 그리고 미생물 분해성을 향상시켰다. 본 연구에서 CP 처리 후 CBPE 필름 표면에서 보여지는 노화 현상을 XPS 결과를 통해 확인할 수 있었다. 본 연구는 CP 처리가 CBPE 필름을 비롯하여 다른 생분해성 식품 포장재의 물리적 특성과 생분해성을 향상시킬 수 있는 기술로서 적용될 수 있다는 가능성을 보여주었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권7호
• /
• pp.1014-1018
• /
• 2001

Pigs respond to extreme temperature (very cold or hot) by physiological and nutritional adjustments. Yet little is known about the effects of different environmental temperature (thermoneutral in the highland area, and hot temperature in the coastal area) where pigs are maintained on the performance of the pigs. Ten pigs each (10 pairs of littermates) were assigned to two treatments (2 locations): highland area (control=CA) or coastal area (hot/heat stress=HS). Experimental design was Paired 't' test. HS pigs had higher average daily water intake (p<0.05) compared to CA pigs (6,05 vs 3.89 kg/d), CA pigs had higher feed intake compared to HS pigs (2.9 vs 1.95 kg/d, p<0,05). CA pigs had higher daily gain compared to HS pigs (0.72 vs 0.58 kg/d, p<0.05). Feed conversion was not significantly different between CA pigs and HS pigs. The digestibility of dry matter, N, Na, K, Mg, CI, Ca and P was not significantly affected by the treatments. High environmental temperature in the coastal area (heat stress) increased water intake, decreased voluntary feed intake and daily gain of the pigs. The results demonstrate that different environmental temperature in the coastal area (heat stress) and highland area (control) had no pronounced effect on digestibility of nutrients.

• 통합자연과학논문집
• /
• 제2권2호
• /
• pp.101-130
• /
• 2009

In recent years, South Korea has often witnessed damages by gusts caused by thunderstorms in summer. The Korea Meteorological Administration defines that a gust happens when the maximum instantaneous wind velocity is 10m/s or more and draws up hourly observation reports. When a cumulonimbus develops due to an ascending current and reaches the height of 12~16 km, the temperature of the cloud top drops and a lightening happens, which causes a gust accompanied by a thunderstorm and further regional meteorological damage. It's difficult to predict a regional gust with the mesoscale prediction model at the administration. Thus this study set out to analyze the damage cases by a gust accompanied by a thunderstorm and to make a contribution to the prediction and understanding of a gust by a thunderstorm. A gust by a thunderstorm happens where potential equivalent temperature converges or is higher than the surrounding areas. The convergence area of potential equivalent temperature matches the track of thunderstorm cells. The Kimje gust took place where high potential equivalent temperature converged, and the Jangsu gust did as the area of high potential equivalent temperature approached. There should be a good amount of vapor supply with the moisture flux converging at the bottom layer in order to bring instability. In addition, it should collide into a dry and cold atmosphere at 700 hPa. The moving track at the center of the low dew point spread corresponds to that of a gust.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.119-128
• /
• 2010

본 논문에서는 다양한 방법으로 제작된 복합재 접착 체결부의 강도에 대한 온도 및 습도 환경의 영향을 연구하였다. 시편은 두 가지 종류의 일체성형 방법 외에 동시접착 및 이차접착 등 총 네 가지 방법으로 제작하였고, 상온건조, 고온습도 및 저온건조 환경 등 세 가지 환경에서 강도시험을 수행하였다. 전체적으로 고온습도 환경에서의 파손강도가 상온 환경에 비해 11~23% 가량 높게 나타났고, 저온 환경에서의 파손강도는 동시접착 체결부를 제외하고는 8~21% 가량 상온 강도보다 낮게 나타났다. 시험 환경에 따른 체결부의 강도 차이는 환경에 따른 접착제의 물성 변화가 주 원인인 것으로 분석되었다.

• 대한기계학회논문집A
• /
• 제41권8호
• /
• pp.759-764
• /
• 2017

본 연구에서는 항공기용 레이돔에 적용되는 복합재의 볼트 체결부 강도에 대한 온도 및 습도 환경의 영향을 연구하였으며 열습환경에 노출된 레이돔 체결부에 대해 수분흡수율을 구하고, 온도와 습도환경에 따른 체결부 강도의 물성변화를 확인하였다. 이때 시편은 환경조건을 고려하여 상온건조(RTD), 고온고습(EWT), 저온건조(CTD) 세 가지로 구분하였으며 볼트 체결부의 파손하중 및 파손모드를 결정하기 위한 실험과 유한요소해석을 수행하였다. 유한요소해석의 결과가 체결부 강도와 파손모드에서 실험결과와 잘 일치하였으며 체결부 파손강도 예측이 가능한 효과적인 방법으로 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.250-252
• /
• 2006

The land surface temperature (LST) can be defined as a weighted average temperature of components which constitute a pixel. The coefficients of split-window algorithm for MTSAT-1R were obtained by means of a statistical regression analysis from radiative transfer simulations using MODTRAN 4.0 for a wide range of atmospheric, satellite viewing angle (SVA) and lapse rate conditions. 6 types of atmospheric profile data imbedded in the MODTRAN 4 are used for the radiative transfer simulations. The RMSE is clearly larger on warm and humid profiles than cold and dry profiles, especially when the satellite viewing angle and lapse rate are large. The derivation of LST equations according to the atmospheric profiles clearly decreased the RMSE without regard to the SVA and lapse rate. The bias and RMSE are decreased as the more controls factors included. This preliminary result indicates that the characteristics of atmosphere, SVA and lapse rate should be included in the LST equation.

• 대한원격탐사학회지
• /
• 제22권5호
• /
• pp.385-388
• /
• 2006

The land surface temperature (LST) can be defined as a weighted average temperature of components which constitute a pixel. The coefficients of split-window algorithm for MTSAT-1R were obtained by means of a statistical regression analysis from radiative transfer simulations using MODTRAN 4.0 for a wide range of atmospheric, satellite viewing angle (SVA) and lapse rate conditions. 6 types of atmospheric profile data imbedded in the MODTRAN 4 are used for the radiative transfer simulations. The RMSE is clearly larger on warm and humid profiles than cold and dry profiles, especially when the satellite viewing angle and lapse rate are large. The derivation of LST equations according to the atmospheric profiles clearly decreased the RMSE without regard to the SVA and lapse rate. The bias and RMSE are decreased as the more controls factors included. This preliminary result indicates that the characteristics of atmosphere, SVA and lapse rate should be included in the LST equation.