References
- Shin, K. C., Lee, J. J., Lee, D. G., "A study on the lap shear strength of a co-cured single-lap joint", International Journal of Adhension and Adhesives, Vol. 14, 2000, pp. 123-139.
- Li. G., Pang, S. S., Woldesenbet, E., Stubblefield, M. A., Mensah, P. F., Ibekwe, S. I., "Investigation of prepreg bonded composite single lap joint", Composites: Part B Engineering Vol. 32, 2001, pp. 651-658. https://doi.org/10.1016/S1359-8368(01)00045-2
- Kayupov, M., Dzenis, Y. A., "Stress concentration caused by bond cracks in single-lap adhesive composite joints", Composite Structures, Vol. 54, 2001, pp. 215-220. https://doi.org/10.1016/S0263-8223(01)00090-3
- Avila, A. F., Bueno, P. O., "An experimental and numerical study on adhesive joints for composites", Composite Structures, Vol. 64, 2004, pp. 531-537. https://doi.org/10.1016/j.compstruct.2003.09.052
- Kim, K. S., Yoo, J. S., Yi, Y. M., Kim, C. G., "Failure mode and strength of uni-directional composite singe lap bonded joints with different bonding methods", Composite Structures, Vol. 72, 2005, pp. 477-485.
- Seong, M. S., Kim, T. H., Nguyen, K. H., Kweon, J. H., Choi, J. H., "A parametric study on the failure of bonded single-lap joints of carbon composite and aluminum", Composite Structures, Vol. 86, 2008, pp. 135-145. https://doi.org/10.1016/j.compstruct.2008.03.026
- Delasi, R., Whiteside, J. B., "Effect of moisture on epoxy resins and composites", Advanced composite materials-environmental effects, ASTM STP No. 658, Philadelphia, U.S.A., 1978, pp. 2-20
- Ishai, O., Arnon, U., "Instantaneous effect of internal moisture conditions on strength of glass-fiber-reinforced plastics", Advanced composite materials-environmental effects, ASTM STP 569, Philadelphia, U.S.A., 1978, pp. 267-276.
- Liao, K., Schultheisz, C. R., Hunston, D. L., "Effects of environmental aging on the properties of pultruded GFRP", Composite: Part B, Vol. 30, 1999, pp. 485-493. https://doi.org/10.1016/S1359-8368(99)00013-X
- Suh, D. W., Ku, M. K., Nam, J. D., "Equilibrium water uptake of epoxy/carbon fiber composites in hygrothermal environmental conditions", Journal of Composite materials, Vol. 35, 2001, pp. 264-278. https://doi.org/10.1177/002199801772662253
- Walker, S. P., "Thermal effect on the compressive behavior of IM7/PET15 Laminates", Journal of Composite materials, Vol. 38, 2004, pp. 149-162 https://doi.org/10.1177/0021998304038648
-
Shimokawa, T., Kakuta. Y., Hamaguchi, Y., Aiyama, T., "Static and fatigue strength of a G40-800/5260 carbon fiber/Bismaleimide composite material at room temperature and 150
${^{\circ}C}$ ", Journal of Composite Materials, Vol.42, 2008, pp. 655-679. https://doi.org/10.1177/0021998308088605 - Bismarck. A., Hofmeier. M., Dorner. G., "Effect of hot water immersion on the performance of carbon reinforced unidirectional poly(ether ether ketone)(PEEK) composites: Stress rupture under end-loaded bending", Composites: Part A, Vol. 38, 2007, pp. 407-426. https://doi.org/10.1016/j.compositesa.2006.03.004
- Kim, H. Y., Park, Y. H., You, Y. J., Moon, C. K., "Short-term durability test for GFRP rods under various environmental conditions", Composite Structures, Vol. 83, 2008, pp. 37-47. https://doi.org/10.1016/j.compstruct.2007.03.005
- Parker. B. M., "Some effects of moisture on adhesive-bonded CFRP-CFRP joints", Composite Structures, Vol. 6, 1986, pp. 123-139. https://doi.org/10.1016/0263-8223(86)90073-5
- Parker B. M., "The strength of bonded carbon fibre composite joints exposed to high humidity", International Journal of Adhension and Adhesives, Vol. 10, 1990, pp. 187-191. https://doi.org/10.1016/0143-7496(90)90102-4
- Ashcroft, I. A., Hughes, D. J., Shaw, S. J., "Adhesive bonding of fiber reinforced polymer composite materials", Assembly Automation, Vol. 20, 2000, pp. 150-161. https://doi.org/10.1108/01445150010321797
- Zhang. Y., Vassilopoulos, A. P., Keller, "Environmental effects on fatigue behavior of adhesively-bonded pultruded structure joints", Composites Science and Technology, Vol. 69, 2009, pp. 1022-1028. https://doi.org/10.1016/j.compscitech.2009.01.024
- 송민규, 권진회, 최진호, 김효진, 송민환, 신상준, “항공용 복합재 단일겹침 접착 체결부의 제작공정에 따른 강도 연구”, 한국항공우주학회지, 제37권 제8호, 2009, pp. 751-758. https://doi.org/10.5139/JKSAS.2009.37.8.751
- ASTM D5229, "Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials".
- MIL-HDBK-17-1F. Volume 1. Polymer matrix composites guidelines forcharacterization of structure materials.
- Tomblin, J., Seneviratne, W., "Laminate statistical allowable generation for fiber-reinforced composite materials; Lamina Variability Method", DOT/FAA/AR-06/53, 2009.
- 김광수, 이영무, 김천곤, "일방향 복합재료 single lap 접합 조인트의 파손 강도 II", 복합재료학회지, 제18권 제1호, 2005, pp. 1-9.
- FM 300 High-Shear Strength Modified Epoxy Film Adhesive Datasheet.
- Fenske, M. T. and Vizzini, A. J., "The inclusion of in-plane stresses in delamination criteria", Journal of Composite Science and Technology, Vol. 35, 2001, pp. 1325-1342.
- Ye, L., "Role of matrix resin in delamination onset and growth in composite laminates", Journal of Composite Science and Technology, Vol. 33, 1988, pp. 257-277. https://doi.org/10.1016/0266-3538(88)90043-7
- Nguyen, K. H., Kweon, J. H. and Choi, J. H., "Failure Load Prediction by Damage Zone Method for Single-lap Bonded Joints of Carbon Composite and Aluminum", Journal of Composite Materials, Vol. 43, No. 25, 2009, pp. 3031-3056. https://doi.org/10.1177/0021998309345295
Cited by
- Evaluation of Mechanical Properties of Carbon/Epoxy Composites Under In situ Low- and High-Temperature Environments vol.39, pp.6, 2015, https://doi.org/10.3795/KSME-A.2015.39.6.567