• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.665-671
• /
• 2004

A mathematical model is presented to predict the frost properties and heat and mass transfer within the frost layer formed on a cold plate. The model consists of the laminar flow equations for air-side and the empirical correlation of local frost density. The correlation of local frost density used in this study is obtained from various experimental conditions by considering frosting parameters. The numerical results are compared with experimental data to validate the model, and agree well with experimental data within a maximum error of 9%.

• 한국지능시스템학회논문지
• /
• 제10권2호
• /
• pp.75-82
• /
• 2000

이논문에서는 영상처리 기법과 신경회로망 분류기를 이용하여 냉연강판의 표면에 나타나는 결함을 검출하는 기법을 제안한다. 냉연강판 표면의 입력영상을 웨이블렛 변환하여 영상신호 데이터량을 감소시키고 영상신호의 저주파수 영역에 해당하는 부분영상으로부터 구한 co-occurrence 행렬을 이용하여 주된 특징들을 추출한 후 신경회로망 분류기를 이용하여 표면결함을 분류하는 과정을 밟는다 현장에서 직접입수한 실제 냉연강판 표면결함 영상에 대하여 결함의 검출 및 분류기법을 제시하고 실험을 통해 기존의 백터양자화 기법과 비교하여 우수한 성능을 보임을 입증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.67-71
• /
• 2003

A hot press method was used to create the optimal fabrication condition for a Shape Memory Alloy(SMA) composite. The bonding strength between the matrix and the reinforcement within the SMA composite by the hot press method was more increased by cold rolling. In this study, the objective was to develop an on-line monitoring system in order to prevent the crack initiation and propagation by shape memory effect in SMA composite. Shape memory effect was used to prevent the SMA composite from crack propagation. For this system an optimal AE parameter should be determined according to the degree of damage and crack initiation. When the SMA composite was heated by the plate heater attached at the composite, the propagating cracks could be controlled by the compressive force of SMA.

• 한국식생활문화학회지
• /
• 제10권3호
• /
• pp.167-174
• /
• 1995

A hazard analysis which included watching operations, measuring temperatures of foods throughout preparation and display, and sampling and testing for microorganisms of total plate counts and coliform bacteria was conducted in various phases of product flow of Naeng-myeun (Cold noodles) and Pi-bim bab (mixed rice) prepared at Korean restaurants. Large numbers of total plate counts were counted from the cooked foods after handling and holding. Ingestion of these foods must be considered high risk. Critical control points identified were, pre-preparation, food handling after cooking, and holding on display in product flow of Nang-Meon and pre-preparation, preparation, and holding on display in product flow of Pi-bim bab. It need for effective quality control of Nang-Meon and Pi-bim bab that training program consist of surveillance, education of the staff, standard operation procedures, forbidding dangerous processes and control of critical points.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.31-37
• /
• 2015

A laser line welder using a solid-state laser (Yb:YAG) has been manufactured for joining ultra-thin cold-rolled steel coils in steelworks. The coils to be welded primarily range from 0.15 to 0.3 mm in thickness and 800 to 1,100 mm in width. Because the steel plate is extremely thin, it is very important to control the stop positions of the clamp at cutting and welding points. In this study, both hydraulic proportional control valves and LVDT sensor embedded cylinders were used to precisely control and monitor the positions of clamps with complementary stoppers. As a result, the positions could be controlled within an error of ${\pm}30{\mu}m$. Erichsen cupping tests on the welded joints show that the Erichsen index ranges from 4.4 to 4.6 mm. Furthermore, the tensile strength of welding points is comparable to that of the base metal.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2383-2389
• /
• 2002

This paper describes an experimental study on fatigue life extension by using cold working process in fastener hole of aircraft structure. Cold working process was applied for A12024-7351 specimens by considering the effect of edge margin on fatigue life. It is generally recognized that cold working process offers a protective zone around fastener hole of aluminum aircraft structure due to the residual compressive stresses which lead to retardation of crack growth. Thus this process provides the beneficial effect of increasing the fatigue life of the component. there by decreasing maintenance costs. It has also been successfully incorporated into damage tolerance and structural integrity programs. Cold working specimens were tested at constant amplitude peak cyclic stresses. Fatigue life of cold working specimen compared with that of specimen fabricated with base material. The increase of fatigue life for cold working specimen is discussed by both considering the effect of residual compressive stresses measured by X-ray diffraction technique and quantitative effect of edge margin.

• The Korean Journal of Pain
• /
• 제8권1호
• /
• pp.18-24
• /
• 1995

We produced the causalgiform pain by the tight ligation of L5 and L6 spinal nerves in the adult rats. To evalute the effect of Ketamine -noncompetitive NMDA (N-methyl-D aspartate) antagoinst- on the causalgiform pain, we tested the changes of; withdrawal sensitivity to the innocuous mechanical stimulation of Von Frey hair 2.35 g(mechanical allodynia); withdrawal frequency to the cold stimulation of acetone (cold allodynia); and total withdrawal time (second) to the cold ($4^{\circ}C$) plate stimulation (cold hyperalgesia) after the administration of 1 mg, 3 mg, 10 mg/kg ketamine. The results were as follows: 1) Cold hyperalgesia was significantly reduced (p<0.05) by 1 mg, 3mg, 01 mg/kg ketamine. 2) Cold allodynia and mechanical allodynia was significantly reduced (p<0.05) by 10 mg/kg ketamine. Above results suggest a therapeutic utility of ketamine in treatment of causalgia - especially, cold hyperalgesia.

• 설비공학논문집
• /
• 제19권6호
• /
• pp.434-440
• /
• 2007

One of the cold start problems of a FCV is the freezing of the water in the water tank when a FCV is not in operation and the surrounding temperature drops below $0^{\circ}C$. The ice in the tank should be melted as quickly as possible for a satisfactory operation of fuel cell vehicles. In this study, the melting process for the constant heat fluxes of the plate heaters was numerically calculated in the 2-D model of the tank and plate heaters. The enthalpy method and FVM code was used for this analysis. The changes of the temperature with heat fluxes and the heat transfer area could be investigated. The energy balance error was found to increase with the heat flux. From this numerical analysis, the proper heat flux value and some important design factors relating local overheating and pressurization of the water tank could be examined.

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.55-62
• /
• 1998

While excellent joint quality has been obtained using dry chamber underwater welding methods, the size limitations imposed by this process restrict its use for underwater construction work. The wet underwater shielded metal-arc welding eliminates this restriction but suffers from poor weld properties by the 1-pass bead-on-plate welding due to the excessive diffusible hydrogen. On the other hand, in the wet underwater welding, it is well known that the quantity of diffusible hydrogen in multi-pass welded parts reduce to less than that in 1-pass welded parts. Therefore, in this paper, welding experiments are made the 3-pass bead-on-plate welds by using TMCP and normalized steel plates and E4301 and cellulose coated electrode. After that, The amounts of the hydrogen absorbed into the 3-pass welded area were measured according to the JIS Z 3118 specification. The microstructural changes as well as the microhardness distribution after the underwater 3-pass welding were also investigated using Vickers microhardness tester and S.E.M and O.M. The results indicated that the quantity of diffusible hydrogen in 3-pass welded areas was reduced little less than a half of one of that in 1-pass welded areas at the specific welding condition. As a result, the cold cracking of 3-pass welded areas decreased by reduced effect of diffusible hydrogen. In the underwater 3-pass welding, the micrography of cold cracking fracture surface showed mainly the cleavage of hydrogen embrittlement.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.46-51
• /
• 2009

본 논문은 세 개의 서로 다른 관수(9, 13 그리고 19)를 가지는 원통-판형 핀 관의 원통 측에서의 열전달 성능을 실험적 방법으로 평가하였다 관외를 흐르는 오일은 관내를 흐르는 냉각수에 의해 냉각된다. 오일 쿨러의 원통-다관형 열교환기는 단일 셀 통로와 두 개의 관 통로로 구성되며, 관 내경은 8.82mm, 관 길이는 575mm이다. 오일의 질량 유량은 $1.2{\sim}6.0m^3/h$이며, 냉각수의 질량 유량은 $0.6{\sim}3.0m^3/h$이다. 실험결과 9개의 관수를 가지는 열교환기의 총합 열전달계수는 13개와 19개의 관수의 열전달계수보다 각각 약 1.8배와 2.3배 높게 나타났다.