References
- Al-Obaid, Y. F., 1990, 'A Rudimentary Analysis of Improving Fatigue Life of Metals by Shot Peening,' ASME Journal of Applied Mechanics., Vol. 57, pp. 307-312 https://doi.org/10.1115/1.2891990
- Almen, T. O. and Black, P. M., 1981, 'Residual Stress and Fatigue in Metals,' McGraw-Hill, New York
- Chung, S. C. and Back, S. D., 1998, 'Effect of Shot Peening on Fatigue Properties in Spring Steel,' Transactions of the KSME, A, Vol. 22, No, 6, pp. 1009-1015
- Maddox, S. J,. 1982, 'Influence of Tensile Residual Stresses on the Fatigue Behavior of Welded Joints in Steel,' ASTM STP 776, pp. 63-69
- Chen, B. D., Griffiths, J. R. and Lam, Y. C., 1993. 'The Effects of Simultaneous Overload and Spot Heating on Crack Growth Retardation in Fatigue,' ASTM STP 637, pp. 153 - 177
- Rich, D. L. and Impellizzeri, L. F., 1977, 'Fatigue Analysis of Cold-Worked and Interference Fit Fastener Holes,' ASTM STP 637, pp. 153-177
- Yoo, J. S., Choi, S. Y., Song, J. H., Song, C. H. and Lim, W. K., 1997, 'Fatigue Crack Retardation by Concurrent Cold-Expansion and Ring-Indentation,' Transactions of the KSME, A, Vol. 21, No.2, pp. 305-315
- Toor, P.M., 1978, 'Cracks Emanating from Precracked Cold-Worked Holes,' Engineering Fracture Mechanics, Vol. 8, pp. 391-395 https://doi.org/10.1016/0013-7944(76)90019-9
- Chandawanich, Noppom, 1979, 'An Experimental Study of Fatigue Crack Initiation and Growth from Coldworked Holes,' Engineering Fracture Mechanics. Vol. 11, pp. 609-620 https://doi.org/10.1016/0013-7944(79)90122-X
- Poolsuk, S. and Sharpe Jr., W. W., 1978, 'Measurement of Elastic-Plastic Boundary around Cold Worked Fastener Hole,' ASME Journal of Applied Mechanics, Vol. 45, pp. 515 - 520 https://doi.org/10.1115/1.3424354
- Ozdernir, A. T. and Edwards, L., 1997, 'Relaxation of Residual Sresses at Cold-worked Fastener Holes due to Fatigue Loading,' Fatigue and Fracture Engineering Materials and Structure, Vol. 20, pp. 1443-1451 https://doi.org/10.1111/j.1460-2695.1997.tb01501.x
- Pavier, M. J., Poussard, C. G. C. and Smith, D. J., 1997, 'A Fnite Element Simulation of the Cold Working Process for Fastener Holes,' Journal of Strain Analysis, Vol. 32, No.4, pp. 287-300 https://doi.org/10.1243/0309324971513418
- Saunder, T. J. and Grandt, A. F., 1999, 'The Effect of Edge Distance on Coldworking Fastener Holes,' UASF ASIP Conference, pp. 153-177
- Kim, C., Yang, W. H., Heo, S. P. and Chung, K. H., 2002, 'Analysis of Residual Stresses Induced by Cold Expansion Using Finite Element Method,' KSAS International Journal, Vol. 30, No. 2, pp. 46-51