• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.377-382
• /
• 1995

Conventional measurement methods using ultrasonic wave or x-ray, eddy current for non-destructive testing(NDT) in nuclear power plants and other industrial plants have been performed as the method of contact with objects to be inspected. With this reason these methods have been taken relatively much time and the inspected area is limited by the location of probe or film. But holographic interferometry which is a non-contact optical measurement method using a coherent light source has an advantage that the quantitative measurement can be performed at a time. In this paper a new method using holographic interferometry and image processing for detecting internal flaws of pressure vessels is presented.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.50-51
• /
• 2003

강한 세기의 레이저가 원자에 입사하먼 원자내의 쿨룽 퍼텐셜이 심하게 왜곡되어 전자가 터널링 이온화된다. 이 이온화된 전자가 레이저 장에 의해 가속되었다가 레이저 장의 방향이 바뀌면 원래의 원자와 결합하면서 고에너지의 광자를 발생시킨다. 레이저의 주기적인 상호작용에 의해 생성된 광자의 에너지는 입사하는 레이저 에너지의 홀수 배에 해당하게 되며, 이를 고차조화파(high-order harmonics)라 한다. 특히 고차조화파는 연엑스선 영역의 빛을 작은 규모의 장치와 적은 비용으로도 발생시키기 때문에 연엑스선의 광원으로서 각광을 받고 있으며, 여러 분야에 사용되어지기 위한 연구가 폭넓게 이루어지고 있다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.85.2-85.2
• /
• 2016

With the advent of ultra-short high-intense XFEL (X-ray Free Electron Laser), time-resolved dynamics has become of great importance in exploring femtosecond real-world phenomena of nanoscience and biology. These include studying the response of materials to femtosecond laser excitation and investigating the interaction of XFEL itself with condensed matter. A variety of dynamic phenomena have been investigated such as radiation damage, ultrafast melting process, non-equilibrium phase transitions caused by orbital-lattice-spin couplings. As far as bulk materials are concerned, the sample size has no effect on the following dynamic process. As a result, imaging information is not required by and large. If the sample size is of tens of nanometers, however, sample starts to experience quantum confinement effect which, in turn, affects the following dynamic process. Therefore, to understand the fundamental dynamic phenomena in nano-science, time-resolved imaging information is essential. In this talk, we will briefly introduce scientific highlights achieved in XFEL-based dynamics. In case of bio-imaging, recent scientific topics will be mentioned as well. Finally, we will aim to present feasible topics in ultrafast time-resolved imaging and to discuss the future plan of CXI beamline at PAL-XFEL.

• Journal of Welding and Joining
• /
• v.33 no.4
• /
• pp.7-16
• /
• 2015

New lasers such as high power, high brightness and short wavelength laser are using diverse industry. Also new technologies are developing actively to solve various issues such as spattering, process monitoring, deep penetration and key-hole stability. ICALEO is the international congress where recent technology for laser material processing and laser system are present. At 2014, it was held at San Diego in USA and more than 260 papers were presented from 28 country. The effect of the laser beam shape such as Gaussian like and top-hat was investigated on acoustic emission signal and pore formation in welding. Inline penetration depth was measured with ICI(Inline Coherent Imaging) technique and the data was verified with real time X-ray image on laser welding. The laser welding performance at low pressure environment was evaluated for the thick plate alloy steel. UV laser was used to weld various metals such as Cu, Aluminum, steel and stainless steel. The effect of the wavelength of the laser on the formation of the wave at the wall of the key-hole front and the absorptivity was investigated.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.68-75
• /
• 1996

More accurate inspection method for facilities of nuclear power plants is required to guarantee the continuous and stable energy supply. The portion of inspection for pipes and pressure vessels is relatively big in the power plants. Conventional inspection methods using ultrasonic wave, x-ray and eddy current for nondestructive testing in nuclear power plants have been performed as the method of contact with objects to be inspected. With this reason these methods have been taken relatively much time, money and manpower. And the area to be inspected is limited by the location of probe or film. These difficulties make the inspection into a time-consuming work. We propose an optical defect detection method using phase shifting realtime holographic interferometry. This method has an advantage that the inspection can be performed at a time for relatively wide area illuminated by the laser beam, a coherent light source and can help an inspector recognize not only defects but also the high stressed areas. In this paper we show that the quantitative measurement using holographic interferometry and image processing for defect in pressure vessels is possible.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1233-1240
• /
• 1996

Conventional measurement methods using ultrasonic wave or x-ray, eddy current for non-destructive testing(NDT) in nuclear power plants and other industrial plants have been utilized as the method of contact with objects to be inspected. For this reason these methods require relatively much time and inspection area is limited by the location of probe or film. But holograpic interferometry which is a non-contact optical measurement method using a coherent light source has an advantage that quantative measurement can be performed at a time. In this paper a new method using realtime holographic interfreometry and image processing for detecting internal flaws of pressure vessels is presented.

• Journal of Magnetics
• /
• v.18 no.1
• /
• pp.39-42
• /
• 2013

We studied the structural and electrical properties of $SrRuO_3$ thin films grown on $SrTiO_3$ (110) substrate. High resolution X-ray diffraction measurement of the grown film showed 1) very sharp peaks for $SrRuO_3$ film with a very narrow rocking curve with FWHM = $0.045^{\circ}$ and 2) coherent growth behavior having the same in-plane lattice constants of the film as those of the substrate. The resisitivity data showed good metallic behavior; ${\rho}$ = 63(205) ${\mu}{\Omega}{\cdot}cm$ at 5 (300) K with a residual resistivity ratio of ~3. The observed kink at ${\rho}(T)$ showed that the ferromagnetic transition temperature was ~10 K higher than that of $SrRuO_3$ thin film grown on $SrTiO_3$ (001) substrate. The observed rather lower RRR value could be partially due to a very small amount of Ru vacancy generally observed in $SrRuO_3$ thin films grown by PLD method and is evident in the larger unit-cell volume compared to that of stoichiometric thin film.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.165-172
• /
• 1998

Epitaxial ultrathin films of $CoSi_2$ and double heteroepitaxial structure of Si/$CoSi_2$/Si(lll) were prepared on Si(111)-$7\times{7}$ substrate by in situ solid-phase epitaxy in a ultrahigh vacuum(LHV). The phase, chemical composition, crystallinity, and the microsructure of the Si/$CoSi_2$/Si(lll) interface were investigated by 2-MeV $^4He^{++}$ ion backscattering spectrometry, X-ray diffraction, and high-resolution transmission electron microscopy. The growth mode of the Co film was the Stransky-Krastanov type with texture when the substrate temperature was room temperature. A-type $CoSi_2$ ultrathin film was grown by deposition of about 50A Co on Si(ll1)-$7\times{7}$ substrate followed by in situ annealing at $700^{\circ}C$ for 10 min. The matching face relationships were $CoSi_2$[110]//Si[110] and $CoSi_2$(002)//Si(002) with no misorientation angle. The A-type $CoSi_2$/Si(lll) interface was abrupt and coherent. The best epi-Si/epi-$CoSi_2$2(A-type)/Si(lll) structure was obtained by deposition of Si film on the CoSii at $500^{\circ}C$ followed by in situ annealing at $700^{\circ}C$ for 10 min in UHV.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.71-78
• /
• 2012

Illite-smectite mixed layers (I-S) occurring authigenically in diagenetic and hydrothermal environments reacts toward more illite-rich phases as temperature and potassium ion concentration increase. For that reason, I-S is often used as geothermometry and/or geochronometry at the field of hydrocarbons or ore minerals exploration. Generally, I-S shows X-ray powder diffraction (XRD) patterns of ultra-thin lamellar structures, which consist of restricted numbers of sillicate layers (normally, 5 ~ 15 layers) stacked in parallel to a-b planes. This ultra-thinness is known to decrease I-S expandability (%S) rather than theoretically expected one (short-stacking effect). We attempt here to quantify the short stacking effect of I-S using the difference of two types of expandability: one type is a maximum expandability ($%S_{Max}$) of infinite stacks of fundamental particles (physically inseparable smallest units), and the other type is an expandability of finite particle stacks normally measured using X-ray powder diffraction (XRD) ($%S_{XRD}$). Eleven I-S samples from the Geumseongsan volcanic complex, Uiseong, Gyeongbuk, have been analyzed for measuring $%S_{XRD}$ and average coherent scattering thickness (CST) after size separation under 1 ${\mu}m$. Average fundamental particle thickness ($N_f$) and $%S_{Max}$ have been determined from $%S_{XRD}$ and CST using inter-parameter relationships of I-S layer structures. The discrepancy between $%S_{Max}$ and $%S_{XRD}$ (${\Delta}%S$) suggests that the maximum short-stacking effect happens approximately at 20 $%S_{XRD}$, of which point represents I-S layer structures consisting of ca. average 3-layered fundamental particles ($N_f{\approx}3$). As a result of inferring the $%S_{XRD}$ range of each Reichweite using the $%S_{XRD}$ vs. $N_f$ diagram of Kang et al. (2002), we can confirms that the fundamental particle thickness is a determinant factor for I-S Reichweite, and also that the short-stacking effect shifts the $%S_{XRD}$ range of each Reichweite toward smaller $%S_{XRD}$ values than those that can be theoretically prospected using junction probability.

• Journal of Periodontal and Implant Science
• /
• v.29 no.2
• /
• pp.401-415
• /
• 1999

Root surfaces affected by periodontal disease undergo various forms of changes. Cementum exposure from gingival recession may result in absorption of calcium, phosphorus, and fluoride and subsequent hypermineralization and increased radiodensity. Although some reports have suggested that inorganic content with root cementum might show various changes depending upon age or extent of periodontal disease, but no consensus can be reached regarding the the distribution of various elements. The present study examines the difference in mineral content between healthy and periodontal diseased roots by analyzing three areas per tooth along the root surface in cervico-apical direction using electron probe and scanning electron microscope. Healthy tooth that was extracted for orthodontic purpose was used as control. Experimental teeth include those with periodontal pocket depth exceeding 6mm and those with gingival recession and periodontal pocket depth of 2-4mm. Levels of Ca, P, Mg and Na were measured using wavelength dispersive x-ray spectrometer at three areas per tooth. The examined areas were located apical to cemento-enamel junction in control and periodontal ligament-depleted areas in experimental teeth. The corresponding areas were also examined with scanning electron microscope(x70) The results are as follows. 1. Minerals were detected in order of Ca, P, Mg and Na. In all root surfaces, levels of Ca and P were higher in dentin than in cementum. 2. Level of Mg was twice as high in dentin than in cementum. There was no significant difference in the level of Mg and Na between normal and periodontal diseased roots or between the various locations in the same root. 3. Level of Ca and P in the surface cementum showed no difference between normal and periodontal diseased root, although the areas in dentin with high level of either ion also showed high level of corresponding ion in cementum. 4. Difference in the Ca and P content between various locations within the same root was noted, although no coherent pattern existed. These results suggest that although the mineral content of the root cementum in periodontitis-affected tooth is affected by exogenous ions from saliva and food, but there was no difference in the mineral contents between normal and periodontally diseased root.