• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.285-291
• /
• 2014

Saflufenacil is a low-volatile and uracil-based herbicide. This herbicide is used for pre-and post-emergence control of major broadleaf weeds. The objective of present study was to develop and validate an analytical method for saflufenacil determination in agricultural products for ensuring the food safety. The saflufenacil residues in samples were extracted with acetone, dichloromethane, and then purified with silica and graphitized carbon cartridge. The purified samples were analyzed by HPLC-UVD and confirmed with LC-MS. The linear range of saflufenacil was $0.1{\sim}5.0{\mu}gmL^{-1}$ with the correlation coefficient (r) = 0.999. Average recoveries of saflufenacil ranged from 80.5% to 110.2% at the spiked level of $0.02{\sim}0.5mgkg^{-1}$, while the relative standard deviation was 0.3~7.3%. In addition, the limit of detection and limit of quantification were 0.005 and $0.02mgL^{-1}$, respectively. Furthermore, an interlaboratory study among three labs was conducted to validate the method, and the results were satisfactory.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.1
• /
• pp.55-66
• /
• 1971

A method for the identification of and measurement of beta activity due to $^{40}K$ have been developed in this institute. The method is based on the principle of : $$G(t)=\frac{A}{A_{\infty}}=1-e^{-{\eta}t}$$ where: G(t)=fraction of maximum activity A = counting rate of thickness $A_{\infty}$= saturation activity ${\eta}$= mass absorption coefficient of $^{40}K$ By this technique, total beta activity in 92 Korean paddy soil samples collected from various part of the country, have been determined and the results of this analysis reported in this paper. Most of the beta activity in soils have been accounted for to be due to $^{40}K$.

• Ocean and Polar Research
• /
• v.40 no.4
• /
• pp.237-247
• /
• 2018

This study aims to estimate optimal harvests, fishing efforts, and stock levels of hairtail harvested by the large pair bottom trawl, the large otter trawl, the large purse seine, the offshore long line, and the offshore angling fisheries by using the surplus production models and the current value Hamiltonian method. Processes of this study are as follows. First of all, this study estimates the standardized fishing efforts regarding the harvesting of the hairtail by the above five fishing gears based on the general linear model developed by Gavaris. Secondly, this study estimates environmental carrying capacity (k), intrinsic growth rate (r), and catchability coefficient (q) by applying the Clarke Yoshimoto Pooley (CY&P) model among various surplus production models. Thirdly, this study estimates the optimal harvests, fishing efforts, and stock levels regarding the hairtail by the current value Hamiltonian method, including the average landing price, the average unit cost, and the social discount rate. Finally, this study attempts a sensitivity analysis to figure out changes in optimal harvests, fishing efforts, and stock levels due to changes in the average landing price and the average unit cost. As results induced by the current value Hamiltonian method, the optimal harvests, fishing efforts, and stock levels regarding the hairtail caught by several fishing gears were estimated as 33,133 tons, 901,080 horse power, and 79,877 tons, respectively. In addition, from the results of the sensitivity analysis, first of all, if the average landing price of the hairtail constantly increases, the optimal harvests of it increase at a decreasing rate, and then harvests finally slightly decrease as a result of decreases in stock levels. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts decreases, but optimal stock levels increase. Optimal harvests start climbing and then decrease continuously due to increases in the average unit cost. In summary, this study suggests that the optimal harvests (33,133 tons) were larger than actual harvests (25,133 tons), but the optimal fishing efforts (901,080 horse power) were much less than estimated standardized fishing efforts (1,277,284 horse power), corresponding to the average of the recent three years (2014-2016). This result implies that the hairtail has been inefficiently harvested and recently overfished due to excessive fishing efforts. Efficient management and conservation policies on stock levels need to be urgently implemented. Some appropriate strategies would be to include the hairtail in the Korean TAC species or to extend the closed fishing season for this species.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.159-170
• /
• 2019

IC industry is one of the foundation and core industries of modern information industry. Therefore, the study of this industry has important theoretical and practical significance. The main purpose of this study is to measure the degree of close correlation between the two indexes through correlation analysis of the selected indicators, so as to study the development trend and direction of IC. Based on the theory of induced innovation and the theory of comparative advantage, this paper analyzes the correlation between the profit of the IC industry and the following three indicators by using chart analysis method, covariance analysis method and correlation coefficient analysis method. These three indicators are R&D expenditure, new product development costs and annual export amount of IC. The selected data are mainly from CHINA STATISTICS YEARBOOK ON HIGH-TECHNOLOGY INDUSTRY. Through the research, it is found that the profit of China's IC industry is positively correlated with the first two indicators and negatively correlated with the annual export amount.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.75-83
• /
• 2021

Over-urbanization has contributed to the increase in traffic problems. This makes the need for effective road planning and design more important than ever. I have been able to learn how to build a new road, and how to use it. However, in spite of the importance of good road planning, there are no systematic standards or methods for calculating traffic volume on railroad routes. Therefore, in this study, to strengthen the competitiveness of railroads, the concept of line capacity is introduced to railroads, and a clear standard and method for calculating railroad line capacity are presented. Based on the results, the line capacity of main railway lines for domestic railways was calculated. By applying the method of calculating the line capacity presented in this study, the capacity of existing railway lines and newly expanded routes can be calculated. It is expected that our findings will be able to provide systematic standards that can be applied to yield a more effective investment and design planning stage; the findings will also help improve the efficiency of railroad operation.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.616-625
• /
• 2021

Deep neural networks are an approximation method that approximates an arbitrary function to a linear model and then repeats additional approximation using a nonlinear active function. In this process, the method of evaluating the performance of approximation uses the loss function. Existing in-depth learning methods implement approximation that takes into account loss functions in the linear approximation process, but non-linear approximation phases that use active functions use non-linear transformation that is not related to reduction of loss functions of loss. This study proposes parametric activation functions that introduce scale parameters that can change the scale of activation functions and location parameters that can change the location of activation functions. By introducing parametric activation functions based on scale and location parameters, the performance of nonlinear approximation using activation functions can be improved. The scale and location parameters in each hidden layer can improve the performance of the deep neural network by determining parameters that minimize the loss function value through the learning process using the primary differential coefficient of the loss function for the parameters in the backpropagation. Through MNIST classification problems and XOR problems, parametric activation functions have been found to have superior performance over existing activation functions.

• Korean Journal of Optics and Photonics
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2022

In this study we introduce a new method for high-spatial-resolution continuous wave (CW) aerosol lidar that has a high spatial resolution in the near field and a low spatial resolution at long distances. A normal lidar system uses a nanosecond-pulse laser and measures the round-trip TOF between the aerosol and laser to obtain range resolution. In this study, however, we propose a new type of spatially resolving aerosol lidar that uses laser-scattering images. Using a laser-light-scattering image, we have calculated the distance of each scattering aerosol image for a given pixel, and recovered the short-range aerosol extinction. For this purpose, we have calculated the distance image and the contribution range of the aerosol to the given one-pixel image, and finally we have calculated the extinction coefficients of the aerosol with range-resolved information. In the case of traditional aerosol lidar, we can only obtain the aerosol extinction coefficients above 400 m. Using our suggested method, it was possible to extend the range of the extinction coefficient lower then several tens of meters. Finally, we can remove the unknown short-range region of pulsed aerosol lidar using our method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.274-284
• /
• 2022

To use kenaf (Hibiscus cannabinus L.) as a fiber and livestock feed, a high-yielding variety needs to be identified. For this, accurate phenotyping of plant height is required for this breeding purpose due to the strong relationship between plant height and yield. Plant height can be estimated using RGB images from unmanned aerial vehicles (UAV-RGB) and photogrammetry based on Structure from Motion (SfM) algorithms. In kenaf, accurate measurement of height is limited because kenaf stems have high flexibility and its height is easily affected by wind, growing up to 3 ~ 4 m. Therefore, we aimed to identify a method suitable for the accurate estimation of plant height of kenaf and investigate the feasibility of using the UAV-RGB-derived plant height map. Height estimation derived from UAV-RGB was improved using multi-point calibration against the five different wooden structures with known heights (30, 60, 90, 120, and 150 cm). Using the proposed method, we analyzed the variation in temporal height of 23 kenaf cultivars. Our results demontrated that the actual and estimated heights were reliably comparable with the coefficient of determination (R²) of 0.80 and a slope of 0.94. This method enabled the effective identification of cultivars with significantly different heights at each growth stages.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.284-295
• /
• 2008

For plastics samples, a method using combustion ion chromatography was selected as a method for rapid low-cost analysis to test whether hazardous substances are contained or not. Using combustion ion chromatography, a verification test for F, Cl and Br compounds generated a linear calibration curve with a correlation coefficient of $r^2$ = 0.999~1.000 in the calibration range from 0.5 to 4.0 mg/kg. The detection limits were found to be 0.005~0.024 mg/kg and quantitative limits were found to be 0.014~0.073 mg/kg. The recoveries of combustion ion chromatography using certified reference material (CRM) were found to be 95.5~104.9%. Based on these results, a proficiency test was conducted together with several laboratories in and out of the country, to make comparative analysis of the results from each laboratory. As a result, the data supported the use of combustion ion chromatography as an effective analysis method to deal with regulations for halogen-free electronic products and for other hazardous substances in the electronic products.

• Journal of Animal Science and Technology
• /
• v.65 no.4
• /
• pp.720-734
• /
• 2023

In Korea, Korea Proven Bulls (KPN) program has been well-developed. Breeding and evaluation of cows are also an essential factor to increase earnings and genetic gain. This study aimed to evaluate the accuracy of cow breeding value by using three methods (pedigree index [PI], pedigree-based best linear unbiased prediction [PBLUP], and genomic-BLUP [GBLUP]). The reference population (n = 16,971) was used to estimate breeding values for 481 females as a test population. The accuracy of GBLUP was 0.63, 0.66, 0.62 and 0.63 for carcass weight (CWT), eye muscle area (EMA), back-fat thickness (BFT), and marbling score (MS), respectively. As for the PBLUP method, accuracy of prediction was 0.43 for CWT, 0.45 for EMA, 0.43 for MS, and 0.44 for BFT. Accuracy of PI method was the lowest (0.28 to 0.29 for carcass traits). The increase by approximate 20% in accuracy of GBLUP method than other methods could be because genomic information may explain Mendelian sampling error that pedigree information cannot detect. Bias can cause reducing accuracy of estimated breeding value (EBV) for selected animals. Regression coefficient between true breeding value (TBV) and GBLUP EBV, PBLUP EBV, and PI EBV were 0.78, 0.625, and 0.35, respectively for CWT. This showed that genomic EBV (GEBV) is less biased than PBLUP and PI EBV in this study. In addition, number of effective chromosome segments (M_e) statistic that indicates the independent loci is one of the important factors affecting the accuracy of BLUP. The correlation between M_e and the accuracy of GBLUP is related to the genetic relationship between reference and test population. The correlations between M_e and accuracy were -0.74 in CWT, -0.75 in EMA, -0.73 in MS, and -0.75 in BF, which were strongly negative. These results proved that the estimation of genetic ability using genomic data is the most effective, and the smaller the M_e, the higher the accuracy of EBV.