• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.71-78
• /
• 2002

동축공기 수소확산 화염에서 세 가지 동축공기 조건과 화염의 유무에 따라 실험조건을 분류하고, 이에 대해 PIV를 이용하여 실험을 수행하였다. PIV를 통해 얻은 속도장을 이용하여 평균속도, 난류강도, Reynolds stress 등을 구하여 유동장을 분석하였다. 우선 단순제트에 대해 상사성을 살펴본 결과 이전의 다른 연구자의 실험결과와 일치하였다. 동축공기가 있는 경우 중심축 속도 감쇠는 $x^{-1}$에 비례하여 감소하는 것을 확인하였다. 축방향 길이를 유효밀도에 의해 정의된 유효 제트 지름으로 무차원화한 값으로 중심축 속도를 도시한 결과 하나의 선분에 떨어지는 것을 확인하였다. 평균속도 분포를 살펴보면 일정한 연료유량에 동축공기 유량을 증가시킨 경우 동축공기가 증가함에 따라 속도 분포의 형태가 바뀌게 되어 자기상사성이 유지되지 않는 것으로 보인다. 난류강도는 평균속도 분포의 경우보다 후류에서 자기상사성이 나타난다.

• 한국전자파학회논문지
• /
• 제17권11호
• /
• pp.1040-1049
• /
• 2006

본 논문에서는 광대역 동축-마이크로스트립 선로에서 전송 손실을 최소화하는 수직 트랜지션(transition)의 설계 기법을 제안하였다. 동축-마이크로스트립 선로의 수직 트랜지션은 동축 선로와 인쇄 회로 기판이 수직으로 연결되는 구조로서 인쇄형 안테나 혹은 마이크로스트립 기판을 사용하는 마이크로파 송수신 장치 등에 널리 사용된다. 제안한 설계 방법은 넓은 대역폭을 가지면서 전송 손실을 최소화하는 방법으로, 접지 개구면(ground aperture)의 지름, 프로브(probe)의 지름, 접지 개구면의 오프셋과 스텁(stub) 길이를 설계 변수로 설정하여, 시뮬레이션을 통하여 설계 값을 구하였다. 동축 선로와 마이크로스트립 기판은 일반적으로 널리 사용되는 SMA 커넥터와 PTFE 재질의 두께 0.254, 0.508 및 0.787 mm 기판을 사용하였다. 시뮬레이션 결과로부터 구한 설계 변수 값들을 입증하기 위하여 SMA 동축 커넥터와 0.787 mm 두께의 기판을 사용하여 수직 트랜지션 시험 블록을 제작하였다. 이 트랜지션의 특성을 측정한 결과 $0.05{\sim}20GHz$주파수 범위에서 반사 계수가 -22 dB 이하이고, 전송 손실이 0.45 dB 이하인 만족할만한 결과를 얻었다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.267-270
• /
• 2002

It is very important to analyze the superconducting power cables by the modeling for correct and reasonable cable design suitable for the domestic situation of power systems. This paper describes the basic modeling for superconducting power cables using ATPDraw. And also it is shown the line constants of cold dielectric coaxial type which is one of the HTS cables. It is compared with the line constants of general two kinds of power cables(OF, XLPE).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.310-313
• /
• 2003

Complex permittivities of human head simulating liquids were measured by a sample holder of terminated slotted coaxial line with a movable probe at mobile communication frequencies. The validity of the liquid measurement system was checked by experiments with the reference liquids. Liquids of ingredients for human brain suggested in IEEE draft and those made by the authors were measured by this slotted line system.

• 전자공학회논문지A
• /
• 제28A권5호
• /
• pp.355-360
• /
• 1991

A transmission-line discontinuities are analyzed by Finite Element Method. We use quasi-static approxmation to determine the circuit parameters of discontinuities. Delta formulation is introduced so that the cancellation error of potential calculation is reduced. To verify this method, capacitance of coaxial cable with discontinuous and coupling capacitances are calculated by modal expansion. This approach can be used for arbitrary discontinuous conducting patterns of microwave devices.

• 한국분무공학회지
• /
• 제20권3호
• /
• pp.168-174
• /
• 2015

Combustion instability is critical problem in developing liquid rocket engine. There have been many efforts to solve this problem. In this study, the method was sought through the injector as part of these efforts to suppress combustion instability. If the injector can suppress the disturbance coming from the supply line as a kind of buffer it will serve to reduce combustion instability. Especially we target at gas propellant oscillation in gas-centered swirl coaxial injector. The phenomenon is simulated with acoustic excitation of speaker. The film thickness response at injector exit was measured by using a liquid film electrode. Also the response of spray to the disturbance was observed by high-speed photography. Gas-liquid momentum flux ratio and the frequency of feeding gas oscillation were changed to investigate the effect of these experimental parameters. The trend of response by varying these parameters and the cause of weak points was studied to suggest the better design of injector for suppressing combustion instability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.289-291
• /
• 2003

Railway takes an important role of transporting massive passenger and freight. Accidents which occur related to trains have a risk of serious loss of lives, so those accidents need to be controlled urgently Therefore moving picture transmission system is required which transmits exact information of moving picture of accident status to CTC and also communication line is also required with it. By using WTB line as a wayside transmission line, railway telephones, fax and train service information are provided to local offices. As transmission line improving project, optical cabling work is being processed by phases. Therefore optical fiber line is more effective way for a communicating way between stations than coaxial transmission line. This Paper considers connecting method when optical fibers is used for moving picture data transmission of train accidents and its problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1412-1414
• /
• 2004

Railway takes an important role of transporting massive passenger and freight. Accidents which occur related to trains have a risk of serious loss of lives, so those accidents need to be controlled urgently. Therefore moving picture transmission system is required which transmits exact information of moving picture of accident status to CTC and also communication line is also required with it. By using WTB line as a wayside transmission line, railway telephones, fax and train service information are provided to local offices. As transmission line improving project, optical cabling work is being processed by phases. Therefore optical fiber line is more effective way for a communicating way between stations than coaxial transmission line. This paper consider's connecting method when optical fibers is used for moving picture data transmission of train accidents and its problems.

• 마이크로전자및패키징학회지
• /
• 제11권3호
• /
• pp.31-36
• /
• 2004

연자성 차폐필름에 대하여 ASTM 방법 및 2-port flanged coaxial line 방법으로 RF (radio-frequency) 영역에서 전자기파 차폐특성을 측정하여 원역장에서의 차폐요인을 정량적으로 분석하였다. 4-13.5 GHz의 고주파 영역에서 연자성 차폐필름의 차폐효과는 반사손실에 의한 효과가 아니라 주로 흡수손실에 의한 차폐효과를 가졌다.

• 한국레이저가공학회지
• /
• 제12권3호
• /
• pp.14-17
• /
• 2009

The laser welding was performed for the flange joint of two overlapped coaxial circular pipes which serve as the inlet and connector pipes of STS 316L. The laser welding test finally resulted in a good penetration depth of 1.8 to 2.0 mm. On the way to get the good welding quality, two important parameters were found to be optimized. One is the focal positioning which is the offset of the laser beam focus to the exact welding seam line, which is more critical in the inner flange laser welding. When the beam spot size was deviated more than $200\;{\mu}m$ from the seam line, welding of two pipes is failed. The other is a gap size since a certain amount of gap is inevitable due to fabrication tolerance, or artificial allowances for smooth insertion of a pipe. However, it is required to restrict the gap allowance within 0.2mm to avoid undesirable undercut on a welding bead.