• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.60-67
• /
• 2014

Technical history of VTOL aircraft is examined from the early helicopter appearance to recent experimental rotorcraft in order to distinguish the core issues of those aircraft. Performance and technological challenges of some VTOL aircraft such as tilt rotor, convertiplane, gyroplane, and coaxial helicopter are discussed. As a new generation high performance rotorcraft, Sikorsky X2 is intensively investigated. Considering the developmental history of X2, the autorotational ability at high speed is recognized as a core technology. Analytic method of autorotation and some results are shown and presents research subjects related to the future Korean high performance rotorcraft.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.47-50
• /
• 2003

In order to verify the extended theory, we have fabricated a two layers cable with the same twisting layer pitch. It was observed that almost all the operational current less than the critical current flowed on the outer layer because of its lower inductance. In case of operational current more than critical currents of layers, the flux flow resistances affect strongly current waveform and thereby the currents of layers were determined by the flux flow resistances. And we investigated withstand voltage, impulse voltage and breakdown characteristics of mini-model cable. In these test, the withstand voltage and impulse voltage test was satisfied and the breakdown voltage was 110kV.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.642-648
• /
• 2000

We introduce a new application of the genetic algorithm for design of the coaxial fed circularly polarized rectangular microstrip antenna. The GA shows excellent results for the design of the microstrip antenna which have a very complex objective function including the input impedance, the effective loss tangent and the axial ratio. The objective function is derived from the cavity model, and the size and the feeding point are optimized by the genetic algorithm. The experimental results show good agreement with the simulated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.859-867
• /
• 2000

In order to analyze the effect of a cover layer or radome for an antenna, the moment method is applied to the analysis of the circular microstrip patch antenna with dielectric superstrate fed by coaxial probe. The probe feed is modeled as a attachment mode method which can solve more exact analysis. In case of a ideal probe feed modeling, the probe self-impedance as well as the rapidly-varying patch current at the vicinity of the feed point was neglected. But a rigorous probe feed model which overcomes these deficiencies are developed, and used in the analysis of isolated circular patches. Measurements were performed to validate the numerical results. These are good agreement with each other.

• Journal of electromagnetic engineering and science
• /
• v.15 no.2
• /
• pp.111-114
• /
• 2015

In this paper, we have proposed dual-band Phi-shaped slot gap filler antenna for satellite internet service applications. Some properties of the antenna such as return loss, radiation pattern, and gain have been simulated and measured. The proposed antenna has a Phi-shaped slot on the circular patch and is fabricated on the TLX-9 substrate. The radius of the circular patch is 25 mm, and it has a coaxial feeding structure. The dual-band Phi-shaped slot gap filler antenna has high-gain, small-size, simple-structure, and good radiation patterns at each band. The operating frequency band can be tuned by adjusting the length AL and FL of the Phi-shaped slot.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.7-12
• /
• 1999

In this paper, the analytical results on the maximum temperature rise estimation, taking account of the magnetizing current, are presented. Magnetizing current effects are considered for the maximum temperature rise estimation during quenches. By introducing the first order model of the infinite solenoids, we calculate the magnetizing and leakage inductances of the coaxial-wound-superconducting transformers. As the permeability of the transformer core increases, so does the magnetizing inductance, while the leakage inductances and the magnetizing current of the transformer go down. These varying permeability effects on maximum temperature rise estimation is applied to the superconducting transformers, of which specifications have already been published. The calculated results showed sufficient margins to the thermal damage.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.77-81
• /
• 1997

In his work, the influence of wire type conducting particles on the insulation reliability of GIS has been systematically investigated when the epoxy resin based dielectric coating was made on he inner side of outer electrode. For this purpose, coaxial cylinder-type electrode was adopted in 362 kV chamber and various sizes of Cu conducting particle were used under different gas pressures. In order to elucidate the coating effect on the gas insulation, different thickness of dielectric coating has been considered and then the lift-off voltage and flashover voltages have been measured. The results shown that the dielectric coating has a remarkable influence by restraining the movement of particle in GIS system, and thus GIS insulation reliability is noticeably improved.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2540-2542
• /
• 2002

In recent years, it is a worldwide trend that many power utilities focus their attention to employ up-to-date communication technology to the automation of their power plants and distribution systems. Automation Systems in Korea was installed using twisted pair cable(TPC), power line carrier(PLC), coaxial cable(CA), wireless network(wireless data, TRS and PCS). Among the communication media only Satellite Communication guarantees the reliable communication in case of emergency such as a flood, a heavy snow and an earthquake. It can integrate two-way satellite systems to existent nationwide SCADA controlling points of electric power transmission & distribution system that enables real time remote monitoring and controlling automatically. This paper presents some of design efforts for the satellite communication network as the media of Automation Systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.203-206
• /
• 1996

In order to investigate the infulence of sodium chloride on the volume resistivity characteristics of transformer oils in temperature range of 20~100[$^{\circ}C$] were made researches. The geometrical capacitance of electrode with coaxial cylindrical shape for measuring the volume resistivity was 16[pF], and hoghmegaohm meter model VMG-1000 was used, the applying voltage were DC 100, 250, 500 and 1000[V]. The classification for the physical properties of specimen by FTIR Spectroscopy was carried out. AS a result of experiment, the value for volume resistivity is increased with sodium chloride contents.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.534-536
• /
• 2000

In this paper, propagation and damping characteristics of PD Pulse in GIS are analyzed using SNM. These characteristics are very important to make a diagnosis and protection of accident in GIS. SNM is numerical method in time domain and very useful method to analyze 3-Dimensional structure such as GIS. GIS modeling is made simply as the form of coaxial cable and then spacers are inserted in it. The scattering and reflection in the GIS are appeared and damping characteristics of PD pulse are shown. When simulation using SNM compare to measurement, two results are similar.