• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1099-1103
• /
• 1999

The surface of an ${\alpha}$-alumina tube was coated with zirconium modified polycarbosilane(PZC) by dip-coating method. Then the tube was pyrolyzed at 573~823 K. The prepared inorganic composite membrane was in $1{\mu}m$ thickness and had no pinholes larger than several nm. For the pyrolyzed inorganic composite membrane, the permeation test of He, $N_2$, $CO_2$, and $O_2$ was performed at 303~423 K. The gas permeation and separation factor were increased with increasing permeation temperature. The permeation for gases was controlled by the activated diffusion mechanism. The separation factor of $CO_2$, to $N_2$was 4.9 at 363 K on the composite membrane pyrolyzed at 823 K and its value was higher than that of He and $O_2$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5195-5200
• /
• 2014

White LEDs are expected to be applied widely as a lighting system. To make white LED chips, one requires a mixture with silicon and a phosphor coating on a LED blue chip. The process of preparing a mixture with silicon using phosphor involves the use of discarded phosphor in the chip process. Reducing the costs of chip production depends on many factors, such as the mixture errors, exposure over time of silicon, and changes in the characteristics of blue chip. This paper reports the characteristics of a white LED chip manufactured through a reproduction process of derelict phosphor. This method was applicable to a real LED flashlight. A derelict phosphor chip showed similar results to a normal white chip for the degradation of cd 3.2[Cd] and 3.6[Cd], color temperature, 57[K] and 58[K], and maximum white wavelength 444.3[nm] and 449.8[nm]. These results are expected to make ea great contribution to cost reduction.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.74-74
• /
• 2018

Ti-6Al-4V alloys have been widely used as orthopedic materials because of their excellent corrosion resistance and mechanical properties. However, it does not bind directly to the bone, so it requires a surface modification. This problem can be solved by nanotube and micropore formation. Plasma electrolytic oxidation (PEO) treatment for micropore, which combines high-voltage spark and electrochemical oxidation, is a new way of forming a ceramic coating on light metals such as titanium and its alloys. This method has excellent reproducibility and can easily control the shape and size of the Ti alloy. In this study, formation of bioactive surface by PEO-treatment after $2^{nd}$ ATO technique of Ti-6Al-4V alloy was invesgated by various instrument. Nanotube oxide surface structure was formed on the surface by anodic oxidation treatment in 0.8 wt.% NaF and 1M $H_3PO_4$ electrolytes. After nanotube formation, nanotube layer was removed by ultrasonic cleaning. PEO-treatment was carried out at 280V for 3 minutes in the electrolytic solution containing the bioactive substance (Mg, Zn, Mn, Sr, and Si). The surface of Ti-6Al-4V alloy was observed by field emission scanning electron microscopy (FE-SEM, S-4800 Hitachi, Japan). An energy dispersive X-ray spectrometer (EDS, Inca program, Oxford, UK) was used to analyze the spectra of physiologically active Si, Mn, Mg, Zn, and Sr ions. The PEO film formed on the Ti-6Al-4V alloy surface was characterized using an X-ray diffractometer (TF-XRD, X'pert Philips, Netherlands). It is confirmed that bioactive ions play an essential role in the normal bone growth and metabolism of the human skeletal tissues.

• Textile Coloration and Finishing
• /
• v.19 no.4
• /
• pp.1-9
• /
• 2007

In recent years, the application of digital textile printing has increased. The benefits of using this method include the ease of sampling and the production of printed textiles. However, the production process of digital textile printing differs from that of conventional printing. For successful digital textile printing by ink-jet technology, the pretreatment of fabrics is very important in order to overcome the following problems. Low viscosity ink can spread easily on the textile surface leading to poor resolution. As a result, the combination of ink and pretreatment chemicals is still impractical and consequently most fabrics used in digital textile printing will require a pre treated coating in order to prevent the ink colours from bleeding on the fabric. Research presented in this paper shows some preliminary attempts to establish the relationship between the pre treatment and the digital textile printing quality. Various cotton fabrics were treated with pre treatment agents including ingredients like thickener, alkali and humectant, and then ink spread effect and colour yield of printed fabrics by reactive ink were analysed by using an optical microscope and K/S value. The results show that digital textile printing quality on cotton fabrics can be optimized with appropriate pre treatments.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.2
• /
• pp.109-115
• /
• 2007

Solar energy conversion to hydrogen was carried out via a two-step thermochemical water splitting using metal oxide redox pair. To simulate the solar radiation, a 7 kW short arc Xe-lamp was used. Partially reduced iron oxide and cerium oxide have the water splitting ability, respectively. So, $Fe_3O_4$ supported on $CeO_2$ was selected as the active material. $Fe_3O_4/CeO_2$(20 wt/80 wt%) was prepared by impregnation method, then the active material was washcoated on the ceramic honeycomb monolith made of mullite and cordierite. Oxygen was released at the reduction step($1673{\sim}1823\;K$) and hydrogen was produced from water at lower temperature($873{\sim}1273\;K$). The result demonstrate the possibility of the 2-step thermochemical water splitting hydrogen production by the active material washcoated monolith. And hydrogen and oxygen was produced separately without any separation process in a monolith installed reactor. But the SEM and EDX analysis results revealed that the support used in this experiment is not suitable due to the thermal instability and coating material migration.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.504-510
• /
• 2016

PURPOSE. Polyamide polymers do not provide sufficient bond strength to auto-polymerized resins for repairing fractured denture or replacing dislodged denture teeth. Limited treatment methods have been developed to improve the bond strength between auto-polymerized reline resins and polyamide denture base materials. The objective of the present study was to evaluate the effect of surface modification by acetic acid on surface characteristics and bond strength of reline resin to polyamide denture base. MATERIALS AND METHODS. 84 polyamide specimens were divided into three surface treatment groups (n=28): control (N), silica-coated (S), and acid-treated (A). Two different auto-polymerized reline resins GC and Triplex resins were bonded to the samples (subgroups T and G, respectively, n=14). The specimens were subjected to shear bond strength test after they were stored in distilled water for 1 week and thermo-cycled for 5000 cycles. Data were analyzed with independent t-test, two-way analysis of variance (ANOVA), and Tukey's post hoc multiple comparison test (${\alpha}=.05$). RESULTS. The bond strength values of A and S were significantly higher than those of N (P<.001 for both). However, statistically significant difference was not observed between group A and group S. According to the independent Student's t-test, the shear bond strength values of AT were significantly higher than those of AG (P<.001). CONCLUSION. The surface treatment of polyamide denture base materials with acetic acid may be an efficient and cost-effective method for increasing the shear bond strength to auto-polymerized reline resin.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.13-18
• /
• 2004

$La_{0.5}Sr_{0.5}CoO_3$ (LSCO) electrodes were prepared on ferroelectric $Sr_{0.9}Bi_{2.1}Ta_2O_9$(SBT) thin films by spin coating method using photosensitive sol-gel solution. Self-patterning technique of photosensitive sol-gel solution has advantages such as simple manufacturing process compared to photoresist/dry etching process. Lanthanum(III) 2-methoxyethoxide, Stronitium diethoxide. Cobalu(II)2-methoxyethoxide were used as starting materials for LSCO electrode. UV irradiation on LSCO thin films lead to decrease solubility by M-O-M bond formation and the solubility difference allows us to obtain self-patternine. There was little composition change of the LSCO thin films between before leaching and after leaching in 2-methoxyethanol. The lowest resistivity of LSCO thin films deposited on $SiO_2$/Si substrate was $1.1{\times}10^{-2}{\Omega}cm$ when the thin film was ennealed at $740^{\circ}C$. The values of Pr/Ps and 2Pr of LSCO/SBT/Pt capacitor on the applied voltage of 5V were 0.51, 8.89 ${\mu}C/cm^2$, respectively.

• Korean Journal of Materials Research
• /
• v.20 no.2
• /
• pp.51-54
• /
• 2010

Transparent conductive films of single wall carbon nanotube (SWCNT) were prepared by spray coating method. The effect of acid treatment on the SWCNT films was investigated. The field emission scanning electron microscope (FESEM) shows that acid treatment can remove dispersing agent. The electrical and optical properties of acid-treated films were enhanced compared with those of as deposited SWCNT films. Nitric acid ($HNO_3$), sulfuric acid ($H_2SO_4$), nitric acid:sulfuric acid (3:1) were used for post treatment. Although all solutions reduced sheet resistance of CNT films, nitric acid can improve electrical characteristics efficiently. During acid treatment, transmittance was increased continuously with time. But the sheet resistance was decreased for the first 20 minutes and then increased again. Post-treated SWCNT films were transparent (85%) in the visible range with sheet resistance of about $162{\Omega}/sq$. In this paper we discuss simple fabrication, which is suitable for different types of large-scale substrates and simple processes to improve properties of SWCNT films.

• Archives of Pharmacal Research
• /
• v.18 no.4
• /
• pp.219-223
• /
• 1995

Rectal absorption of opeprazole, a proton pump inhibitor, from suppositories was studied in rabbits. The suppositories were prepared by the conventional melting method with two types of bases, water-soluble polyethylene glycol (PEG) 4000 and oil-soluble Witepsol H15 bases, and administered intractally (ir) to rabbits at a dose of 10 mg omeprazole/kg. The plasma omeprazole concentration-time profiles of the two suppositories were compared with those following intravenous 9iv) administration of the same dose. There were no significant differences between the two suppositories in bioabailabilities and peak plasma concentrations $(C_{max})$. Bioavaiabilities and $C_{max}$ of PEG- and Witpsol suppositories were 30.3 and 33.9%, and 7.0 and $5.6\mug/ml$, resepectively. However, PEG suppository showed significantly (p<0.05) shorter time to reach peak plasma concentration $(T_{max})$ mean absorption time (MAT) and mean residence time in the plasma (MRT) than Witepsol suppository. The $T_{max}$ MRT nad MAT were 25.0, 83.0 and 38.5 min for PEG syppository, but were 90.0, 122.5 and 78.0 min for Wiepsol supposiotory, respectively. These differences between thw two suppositories could be explanined by the difference in the in vitro dissolution rates between the suppositories. The dissolution of omeprazole form PEG suppository was reportedly much faster than that from Witepsol suppository. It suggests that plasma profiles of omeprazole, especially $C_{max}$ MAT and MRT, could be controlled by modifying the in vitro dissolution rate of the drug from the suppositories. Above results suggest that rectal suppository is worth developing as an alternative dosage form of omeprazole to the conventional oral preparations which need sophisticated treatments, such as enterix coating, to prevent acid degradation of the drug in the stomach fluid.

• YAKHAK HOEJI
• /
• v.45 no.2
• /
• pp.180-189
• /
• 2001

We have reported that water-extracted Korean mistletoe (KM-110) had various biological activities such as antitumor and immunomodulatory activity, and the pectin fraction (KML-C) of the extract was one of major factors related to its biological functions. In this paper, we produced murine monoclonal antibody (mAb) against KML-C. The cAbs obtained were largely classified into two groups according to specificity to KML-C and ML-I, a pectin from European mistletoe. One group mAbs (9H7-D10 and 3C2-lH4) strongly reacted with KML-C, but not ML-I. In contrast, another group cAbs (8Bll-2C5, BE12-3E9 and 5E10-Fl) reacted with both KML-C and ML-1. The subisotypes of these mobs were shown to be IgGl (9H7-lD10, 3C2-lH4 and 8Bll-2C5) or IgM (8E12-3E9 and 5E10-Fl). To develop an assay system for determination of the amount of KML-C, we established the sandwich ELISA (enzyme-linked immunosorbent assay) method using these mAbs and horse radish peroxidase (HRP)-labelled cAbs. In various combinations of the cAbs for coated antibody and detection antibody, the sandwich ELISA quantitatively detected KML-C, showing the detection limit ranging from 7-5,000 ng/ml. Especially reproducibility (C.V) of the sandwich ELISA, in which 8E12-3E9 was used for coating antibody and 8Bll-2C5-HRP for detection antibody, was 4.59-5.83 in intra assay, and 3.9-9.4 in inter assay.