• 한국자기학회지
• /
• 제3권2호
• /
• pp.108-114
• /
• 1993

자기기록매체에 적합한 실리카 피착 ${\gamma}-Fe_{2}O_{3}$ 제조에 있어서 실리카 피착의 효과와 영향에 대하여 검토하였다. 특히 ${\gamma}-Fe_{2}O_{3}$ 제조시 열처리단계에 있어서 실리카 피착의 효과와 분말의 특성과의 상관관계를 조사하는데 연구의 중점을 두었다. 수산화철 표면에 무기물질인 실리카성분을 물유리를 사용하여 피착한 시료와 피복하지않은 시료를 후속 열처리하여 ${\gamma}-Fe_{2}O_{3}$를 제조한후 이들 분말의 특성을 조사하였다. ${\gamma}-Fe_{2}O_{3}$에 피복된 실리카 피착층은 환원 시 과환원과 급속한 산화반응을 억제하는 확산장벽으로 작용하여 최종제품내에 ${\alpha}-Fe_{2}O_{3}$의 혼입을 방지하기 때문에 실리카 피복된 ${\gamma}-Fe_{2}O_{3}$는 높은 자화특성을 나타내었다. 또한 실리카 피척층은 소결 억제제로 작용하여 실리카가 피복된 시료의 경우 침상성이 우수하여 높은 보자력과 비표면적을 나타내었다.

• 한국주조공학회지
• /
• 제22권1호
• /
• pp.42-48
• /
• 2002

Effects of coating treatment of metallic Cu, Ni-P film on $SiC_p$, for $SiC_p$/iron aluminide composites were studied. Porous hybrid preforms were fabricated by reactive sintering after mixing the coated $SiC_p$, Fe and Al powders. Then the final composites were manufactured by squeeze casting after pouring AC4C Al alloy melts in preforms. The change of reactive temperature, density, microstructure of the preforms and microstructure of the composites were investigated. The exprimental results were summarized as follows. The thickness of Cu and Ni-P metallic layer formed on $SiC_p$ by electroless plating method were about $0.5{\mu}m$ and coated uniformly. There was no remakable change in the ignition temperature with variation of the mixing ratio of Fe and Al powder while in the case of coated $SiC_p$ it was lower about $20^{\circ}C$ than in the non-coated $SiC_p$. The maximum reaction temperature increased with increasing Al contents, but decreased with increasing $SiC_p$ contents. Expansion ratio of preform after reactive sintering increased with amount of Cu coated $SiC_p$. In the case of Fe-70at.%Al, the expansion ratio was about 7% up to 8wt.% of $SiC_p$, addition but further addition of $SiC_p$, increased the ratio significantly. And in the case of Fe-50 and 60at.%Al, it was about 20% up to 16wt.% of $SiC_p$ addition and about 28% in 24wt.% of $SiC_p$, addition. The microstructures of compounds showed that the grains became finer as amount of $SiC_p$, and mixing ratio of iron powder increased and the shape of compounds was changed gradually from irregular to spheroidal.

• 유기물자원화
• /
• 제32권3호
• /
• pp.57-66
• /
• 2024

본 연구에서는 반도체 패키징 공정에서 발생하는 실리콘 슬러지(Silicon-sludge, S-sludge)에 실리카층을 코팅(Silica coated silicon-sludge, SS-sludge)하였으며, 이를 에폭시 몰딩 컴파운드(Epoxy molding compound, EMC)의 필러로 적용하였다. 상세히는, 산세처리를 통해 S-sludge의 금속불순물을 제거하였으며, 졸-겔법을 통해 SS-sludge를 제조하였다. SS-sludge는 에폭시 고분자, 경화제 및 카본블랙과 혼합하여 EMC(Silica coated silicon-sludge EMC, SS-sludge EMC)로 제조되었다. 적외선 카메라를 통한 방열 특성 분석 결과, 제조된 SS-sludge EMC는 58.5℃의 가장 높은 표면 온도를 나타내었다. 이는 SS-sludge의 주성분인 실리콘의 높은 열전도도(150W/mK) 및 실리카 코팅에 의해 EMC의 방열 특성이 향상되었기 때문이다. 본 연구를 통해, 반도체 패키징 공정에서 발생하는 실리콘 슬러지를 고부가가치를 지닌 반도체 패키징용 EMC의 필러로 재활용할 수 있는 방안을 제시하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.110-116
• /
• 1997

The tribological behaviour of WS$_2$ solid lubricant was investigated using a ball-on-disk type tester. The WS$_2$ powder was spray-coated at room temperature and the effects of specimen configuration, atmosphere, applied load and rotating spccd on the friction coefficient was examined. WS$_2$ coated ball and disk showed the lowest friction coefficient of 0.05 in the nitrogen atmosphere under 0.3 kgf and 100 rpm, whereas relatively high coefficient of 0.1 - 0.15 was observed in air atmosphere. This confirmed that the spray-coated WS$_2$ solid lubricant was effective in reducing the friction coefficient and improving wear life in nitrogen atmosphere.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.602-606
• /
• 2003

Silicon has been developed as an alternate anode material for lithium secondary batteries. A simple approach to improve the electrical contact of silicon powder has described. Carbon-coated and silver-coated silicon have been prepared by chemical vapor deposition and electroless plating respectively. Assembled cells, which consisted of surface modified silicon, lithium foil and $Li^+$ contained organic electrolyte, have been studied using electrochemical methods. Carbon-coated silicon was improved in the electrochemical performance such as reversibility and resistance compared to surface-unmodified silicon.

• 한국응용과학기술학회지
• /
• 제36권2호
• /
• pp.498-506
• /
• 2019

이 연구는 경상북도 봉화지역에서 매장된 천연 광물을 이용하여 화장료용의 분체로써 활용가치를 부여한 코팅 방법에 관한 것이다. 이 광물의 이름은 부석이라고 칭하며, 미립자 파우더를 개발하여 이 파우더의 성능을 평가하고 화장품의 효능적 가치가 있는 가에 대하여 연구한 결과를 보고한다. 이 파우더의 표면에 오일을 코팅하기 위하여 미립자 표면에 알루미늄하이드록사이드를 1차 코팅한 후에 여기에 알킬실란으로 코팅하였다. 또한, 식물성 오일로 코팅하여 파우더의 응집을 막고, 오일상에서의 분산성을 높일 수 있도록 하였다. 첫째; 부석파우더의 입자는 $10{\sim}50{\mu}m$의 입자를 가지고 있었으며, 입자의 표면에 다공성의 구멍이 있었다. 둘째; 이 파우더의 구성성분은 $SiO_2$, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $K_2O_2$, $Na_2O$, $TiO_2$, $TiO_2$, MnO, $Cr_2O_3$, $V_2O_5$ 등을 함유하였다. 셋째: 이 파우더의 입자는 판상형 구조를 가지며, 다공성으로 적갈색을 가지고 있음을 SEM과 TEM 분석을 통하여 알 수 있었다. 넷째; 이부석 파우더의 원적외선 방사율은 $0.924{\mu}m$이었으며, 방사에너지는 $3.72{\times}10^W/m^2{\cdot}{\mu}m$ 이었다. 또한 음이온 방출량은 128 ION/cc를 방출하는 것으로써, 코팅을 하더라도 변하지 않고 그대로 그 성능이 유지되는 것을 알 수 있었다. 이러한 결과를 바탕으로 화장품의 응용분야로써 비비크림, 쿠션파운데이션, 파우더펙트 등의 색조화장품, 선블록크림, 워시오프 마사지팩 등의 기초 화장료에 폭넓게 응용이 가능할 것으로 기대한다.

• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.32-37
• /
• 2006

Micron size Co-alloy(T800) powder was coated on Inconel 718 by HVOF thermal spraying for the studies of the improvement of durability of high speed spindle by using Taguchi program for the parameters of spray distance, flow rates of hydrogen and oxygen and powder feed rate. The optimal coating process was determined by the studies of coating properties such as micro-structure, porosity, surface roughness and micro hardness. Friction and wear behaviors of coatings were investigated by sliding wear test at room temperature and $1000^{\circ}F(538^{\circ}C)$. At both room temperature and $538^{\circ}C$ the sliding wear debris and friction coefficients of the coating were drastically reduced compared with the surface of non-coated parent material. This shows that Co-alloy powder coating is highly recommendable for the durability improvement surface coating of high speed air-bearing spindle. At high temperature wear traces and friction coefficients of both coating and non-coating were drastically reduced compared with those of room temperature since the brittle oxides were formed easily on the surface, and the brittle oxide phases were attrited by the reciprocating sliding wear according to the complicated mixed wear mechanisms These oxide particles, partially melts and the melts play role as lubricant and reduce the wear and friction coefficient. This also shows that Co-alloy powder coating is highly recommendable far the durability improvement surface coating on the surface vulnerable to frictional heat such as high speed spindles.

• 한국분말재료학회지
• /
• 제19권3호
• /
• pp.210-214
• /
• 2012

Mass production-capable $Li_2MnSiO_4$ powder was synthesized for use as cathode material in state-of-the-art lithium-ion batteries. These batteries are main powder sources for high tech-end digital electronic equipments and electric vehicles in the near future and they must possess high specific capacity and durable charge-discharge characteristics. Amorphous silicone was quite superior to crystalline one as starting material to fabricate silicone oxide with high reactivity between precursors of sol-gel type reaction intermediates. The amorphous silicone starting material also has beneficial effect of efficiently controlling secondary phases, most notably $Li_xSiO_x$. Lastly, carbon was coated on $Li_2MnSiO_4$ powders by using sucrose to afford some improved electrical conductivity. The carbon-coated $Li_2MnSiO_4$ cathode material was further characterized using SEM, XRD, and galvanostatic charge/discharge test method for morphological and electrochemical examinations. Coin cell was subject to 1.5-4.8 V at C/20, where 74 mAh/g was observed during primary discharge cycle.

• 한국정보통신학회논문지
• /
• 제19권8호
• /
• pp.1859-1866
• /
• 2015

본 논문은 파우더 메이크업 효과를 시뮬레이션 하는 새로운 방법을 제안한다. 간단하면서도 사실적인 색상을 표현할 수 있는 색상 발현 모델을 고안하고, 여러 색상의 인조스킨에 파우더를 도포한 사진 이미지 분석에 색상모델을 적용하여 파우더 고유의 투과색 및 도포 두께를 추출하였다. 또한, 실제 사람 피부에 도포된 파우더 도포 두께 패턴을 추출하고 이를 다른 사람의 사진 상에서 메이크업 시뮬레이션 하는 데 사용하여 파우더의 질감을 실감 있게 표현하였다. 실험 결과 제안된 메이크업 시뮬레이션은 사실적인 색감과 질감을 나타낸 것으로 평가되었으며, 파우더 색상을 가상으로 테스트 하는 데 사용할 수 있을 것으로 기대한다.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.953-959
• /
• 2004

BaTiO$_3$ powder has been applied in so much electronic ceramics. Therefore, as recent, the method to add or coat additive will be needed BaTiO$_3$ powder. As a kind of the method, the coating of BaTiO$_3$ powder was considered. In this study, during BaTiO$_3$ powder was coated by BaTiO$_3$ sol, gelation path was experimented. Standard coating condition was set for homogeneous coating. The phase of the gel was deferent by gelation path. It was confirmed the amorphous gel was made in BaTiO$_3$ phase easily at low temperature. In the amorphous gel, particle growth was shown at 900$^{\circ}C$, because crystallization temperature was low. The optimal ratio of sol and powder was at 10 vol% for the homogeneous coating.