• Journal of the korean society of oceanography
• /
• v.35 no.2
• /
• pp.65-77
• /
• 2000

A simple but effective method has been developed for estimating diurnal and semi-diurnal tidal currents from trajectories of satellite-tracked drifters. The estimation method consists of separation of tidal current signals contained in the drifter trajectories, computation of undulations by diurnal and semi-diurnal currents, and correction of dominant diurnal and semi-diurnal tidal constituents. M$_2$ tidal currents estimated from drifter trajectories in the Yellow Sea are well consistent with those observed by moored current meters and this supports the validity of this method. We have constructed M$_2$ tidal current chart in the Yellow Sea by applying this method to available drifter trajectories collected during 1994-1998. According to this chart, M$_2$ current in the Yellow Sea rotates in the clockwise direction south of 35$^{\circ}$ 30'N but in the counterclockwise one to the north. Also it is found that the M$_2$ current is strong in the bank area northeast of the Changjiang River mouth and in the Korean coastal area, while it is weak in the deep central trough.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.247-257
• /
• 2022

In order to investigate the generations of rip currents modulated with the tidal elevations at a mega-tidal beach at the West Sea coast, numerical simulations of rip currents over the topography of the Daecheon beach were performed by using a Boussinesq-type wave and current model, FUNWAVE. The mega-tidal coast includes rocky outcrops (i.e., reefs) lying over or under the water surface according to the tidal elevations in the offshore and nearshore bathymetry. The offshore topographically-controlled rip currents were well reproduced due to the alongshore non-uniformities transformed by the tide-modulated topography. This study addressed the generation types of rip currents to occur at the mega-tidal coast with the tide-modulated outcrops and reefs.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2008.09a
• /
• pp.84-87
• /
• 2008

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.157-157
• /
• 1992

Accuracy of numerical simulations of tsunami has a often been discussed in terms of the final run-up heights and inundated areas. The present technique of simulation is said to yield accurate results within an error of 15 % as long as run-up height concerns.(omitted)

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2008.09b
• /
• pp.84-87
• /
• 2008

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.4
• /
• pp.228-237
• /
• 2015

Field observations were conducted to collect hydrodynamic and morphological data, which are needed to account for mechanisms of bathymetry changes caused by physical forcings, in Haeundae beach. In order to quantitatively describe characteristics of wave transformations and current patterns in space in winter and summer, in-situ sensors for measuring waves and current profiles were installed at three locations in the cross-shore direction and also three locations in the along-shore direction. As for the results of wave measurements, waves with main direction from the east dominate in winter while waves are incident from the S and the ESE in summer. Analysis of current data reveals that currents over the study domain are considerably influenced by a pattern of tidal motions, thereby, mainly oscillating in the direction of tidal currents, i.e., east-west directions, in both winter and summer. Currents tend to be influenced by local bathymetry in the shallow water region, with the direction changed along the depth contours and the magnitude reduced as they approach the shoreline. The results analysed from the hydrodynamic data through this study can be further combined with the morphological and bathymetry data, leading to the quantification of seasonal sediment transport rates and sand budget changes.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.865-875
• /
• 2022

Field measurements and numerical simulations using EFDC model were performed to quantify the changes of water circulation near Gusipo coast located in the Yellow Sea of Korea to estimate the impact of the construction of the coastal structures (jetty, groin, Gusipo port and bridge). The model predicted tide and tidal currents agreed reasonably well with the measurements. The maximum currents during spring tide near the Gusipo Beach (GB) have the range of 20~40 cm/sec whereas those off the GB range from 60 to 80 cm/sec. The typical patterns of tidal current show parallel with the local isobath. Tidal currents flow northeastward during the flood tide whereas the currents during the ebb tide flow southwestward. The current speeds at shielded waters after the construction of coastal structures strongly decreased as compared with those before the construction. The tidal volume due to the construction of coastal structures was estimated using the depth averaged velocity for 24 hours of spring tide. Tidal volume after construction of coastal structures was compared with initial state (before construction). Tidal volume at present state (after construction of jetty, groin, Gusipo port and bridge) decreased by 28.4% as compared with that of the initial state. The volume after construction of jetty and groin decreased by 21.3%, and the volume after construction of Gusipo port and bridge decreased by 9.8%.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.6
• /
• pp.350-360
• /
• 2016

In order to investigate characteristics of waves and currents varying in space in the Haeundae coast in winter, numerical simulations by using a 2-D spectral wave model(SWAN) and 2-DH hydrodynamic model(Delft3D) were carried out in this study. The results of numerical simulations were validated with the field data collected at several different locations in the study area in February, 2014. From the numerical simulations, it was found that waves and currents were significantly influenced in terms of direction and magnitude by bottom topography characterized by straggling rock crops covered with sea grasses. The coupling of SWAN and Delft3D models also revealed that alongshore currents directing from the east to the west were developed in the nearshore, due to the influence of larger waves with the main incident direction from the east.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.91-107
• /
• 1995

In this paper, previously proposed mechanisms of generation and maintenance of rip currents are grouped into three broad categories; (1) prismatic topography models, (2) non-prismatic topography models and (3) structural controls by natural and/or constructed features, such as headlands, piers. groins, jetties. etc. The prismatic models can explain the occurrence of a rip current on a planar beach, while non-prismatic model needs undulatory topography inside the surf zone to generate and maintain a rip current. Yet more detailed and thorough studies need to be conducted to include all relevant variables and to clarify the mechanism(s) governing rip current. Next a simple model is presented to predict mean longshore currents behind a longshore bar (or submerged breakwaters) by considering mass transport over the bar and the bar morphology. This hydrodynamic model could be extended to include the sedimentary feedback mechanism.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.3
• /
• pp.266-274
• /
• 1994

Two-dimensional numerical analysis is performed for the simulation of tidal characteristics related to various development projects in Incheon coastal waters along the west coast of Korea. Field observation of tides and currents was made in order to provide the input boundary and validation data set to the numerical modelling. For the simulation of changes of tides and currents a depth-integrated two-dimensional shallow water model of Flather and Heaps (1975) has been used herein. Tidal model is set up with open boundary sea level from observed two major constituents, M$_2$ and S$_2$. Subsequently the established model is utilized to investigate the effect of two development projects in this region. It has been found that in spring tide the changes of tidal amplitude are small, however, those of tidal current are locally significant.