• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.49-56
• /
• 1998

최근 국내의 에너지 수요는 특히 전기에너지 분야에서 급격한 증가추세를 보여왔으며 그 결과 전력생산을 위한 화석연료 중 특히 석탄의 사용량은 해가 갈수록 증가하였으며 이에 따라 다량의 대기오염물질과 온실가스 등이 발생하고 있어서 미래의 석탄 연소시스템들은 높은 열효율과 최소의 대기오염물질 배출을 필요로 하고 있다. (중략)

• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.324-330
• /
• 1995

석탄 연소로에 사용 적합한 석탄의 선정 및 조업조건의 설정에 도움을 주고, 석탁회분의 슬래깅 성향을 파악하기 위해서 갈탄부터 역청탄에 이르는 4종의 시료를 사용하여 산화성 분위기에서 고온 회전 점도계를 사용하여 석탄회분 슬래그의 점도를 온도의 함수로서 측정하였다. 또한 석탄회분의 슬래깅 성향을 해석하기 위해서, 석탄회분 조성을 사용한 Base/Acid Ratio, Lignite Factor 및 Silica Ratio 등의 주요한 인자들이 슬래그 점도에 미치는 영향을 고찰하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1992.10a
• /
• pp.69-74
• /
• 1992

The characteristics of the landfill of coal ash and ironwork wastes are investied by performing the basic geotechnical experiments and groundwater quality analyses in the landfills. The results show that the waste materials themselves have good characteristics that can be used as reclamation materials. However, landfills need either some ground improvement or costly foundation and excavation methods to be used as construction sites, because of the careless management during the period of waste disposal.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.171-182
• /
• 2006

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.05a
• /
• pp.22-27
• /
• 1994

6종류의 유연탄을 대상으로 석탄회분의 용융온도와 화학적조성을 측정하고, 대상탄 회분에 대해 Rs 값과 Fs 값을 계산해 봄으로써 각 탄들의 Slagging 성향을 알아보았다. 그리고, 이 자료만으로는 정확한 Slagging 성향의 예측이 어려우므로 분류층 가스화기의 조건을 모사한 DTF(Drop Tube Furnace : 이하 DTF)장치를 이용하여 온도와 체류시간을 달리하면서 생성되는 Slag의 화학적조성, 강도, 점착속도 등을 측정하여 Slagging 형태의 가스화기 운전에 있어서 최적조건을 제시하고자 한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.03a
• /
• pp.83-88
• /
• 1994

The DDC(dynamic deep compection) was carried out the main method of ground improvement for construction of municipal high way. The project area is composed of the municipal waste dumped, demolished building debris, coal ash and industrial waste made between 1983 and 1989. From the result of fileld measurement, it was found that waste landfill was compressed considerably (15 ~ 20% of full depth), and the strength was increased satisfactorily(20 ~ 120% of original N-value, 55 ~ 230% of original dynamic cone penetration resistance). And the chemical inclination of the municipal waste landfill was analyzed for expection and control of settlement.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.329-330
• /
• 2015

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.75-81
• /
• 1999

석탄가스화 복합발전기술은 석탄과 산화제의 부분 연소 반응 및 가스화 반응을 통하여 가스 생성 후 불순물을 용이하게 분리할 수 있으므로 기존의 미분탄 발전 방식에 비해 대기 오염물질인 H$_2$S 및 NH$_3$ 등의 SOx, NOx 등의 발생량을 저감시킬 뿐만 아니라 발전 효율이 높아 $CO_2$ 발생량도 줄일 수 있는 장점이 있다.(중략)

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.156-158
• /
• 2006

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.43-52
• /
• 2010

Glass was fabricated by using refused coal ore obtained from Dogye coal mine in Samchuk. We additionally used soda ash and calcium carbonate as raw materials to make a glass with the chemical composition of soda-lime glass. And the properties of glass were measured when limestone was used as natural raw materials instead of calcium carbonate as chemical raw materials. Transparent glass was fabricated by melting raw materials at $1550^{\circ}C$ for 1 hr in an electrical furnace. The various kinds of glass samples were fabricated according to the kinds of refused coal ore and glass cullet. The optical properties of transmittance and color chromaticity were measured by UV/VIS/NIR spectrometer and the thermal properties of thermal expansion coefficient and softening point were measured. Transparent glass with the transmittance of over 70% in visible range was fabricated by using normal refused coal ore and black colored glass with the transmittance of 0~35% was fabricated by using shel1 type refused coal ore. Therefore, it is concluded that refused coal ore can be used for raw materials to manufacture secondary glass products such as a glass tile and foamed glass panel for construction material.