• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 1993년도 EARTH 발표논문초록
• /
• pp.17.1-17
• /
• 1993

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 2004년도 Annual Meeting BioExibition International Symposium
• /
• pp.105-111
• /
• 2004

• 한국대기환경학회지
• /
• 제33권5호
• /
• pp.473-479
• /
• 2017

This study was designed to understand characteristics of oxy-combustion of coal, dried sewage sludge and solid refuse fuel (SRF). Thermogravimetric analysis was conducted by burning the fuels with air, 21% oxygen ($O_2$)/79% carbon dioxide ($CO_2$) and 30% $O_2/70%$ $CO_2$. Heating rates were varied as 5, 10, 25, 40 and $100^{\circ}C/min$. Complete coal combustion was found at the heating rates of 5, 10, 25 and $40^{\circ}C/min$, and different combustion behavior was found with the gas composition at the heating rates of 10, 25, 40 and $100^{\circ}C/min$. Coal combustion with 30% $O_2/70%$ $CO_2$ showed the highest while coal combustion with 21% $O_2/79%$ $CO_2$ showed the lowest combustion rate. On the other hand, the combustion of dried sewage sludge and SRF showed similar combustion behavior with respect to the combustion gas composition. This suggests that oxy-combustion of dried sewage sludge and SRF which contain a large amount of volatile matter may show similar combustion behavior to their air combustion.

• 에너지공학
• /
• 제26권4호
• /
• pp.74-83
• /
• 2017

Coal-fired power plants supply roughly 50 percent of the nation's electricity but produce a disproportionate share of electric utility-related air pollution. Coal combustion technology can facilitate volume reduction of up to 90%, with the inorganic contaminants being captured in furnace bottom ash and fly ash residues. These disposal coal ash residues are however governed by the potential release of constituent contaminants into the environment. Accelerated carbonation process has been shown to have a potential for improving the chemical stability and leaching behavior of bottom ash residues. The aim of this work was to quantify the volume of $CO_2$ that could be sequestrated with a view to reducing greenhouse gas emissions and stabilize the contaminated heavy metals from bottom ash samples. In this study, we used PC boiler bottom ash, Kanvera reactor (KR) slag and calcined waste lime for measuring chemical analysis and heavy metals leaching tests were performed and also the formation of calcite resulting from accelerated carbonation process was investigated by thermo gravimetric and differential thermal analysis (TG/DTA).

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.253-259
• /
• 2005

Mine is quickly decline, Nowadays, many of abandoned and closed mines. AMD is abandoned surface water by accumulated yellowboy and caused environmental pollution by amount of heavy metals. The aim of this study waste lime was mixed with the sediment to produce an aggregate far the purpose of neutralizing the acidity and stabilization the heavy metal in the aggregate structure .to pozzolan effect. The result of Waste lime and sediment mixed(5%, 10%, 20%)ration by curing days(3, 7, 38days), After 28 curing days as 5% mixed waste lime leaching solution concentration of all heavy metals is satisfied with regulation limit. Also, the result of fractionate heavy metals to stabilization as 28 curing days very decrease exchangeable and reducible type, and then increase carbonate type. With the above results, waste lime the most effective for the sediment treatment and useful for the recycling waste resource.

• 아시안잔디학회지
• /
• 제13권4호
• /
• pp.191-200
• /
• 1999

The objective of this study was to improve the recycling rate of coal ash fly, industrial waste. This study was conducted to analyze the physico-chemical properties of \"CellCaSi\" and clarify the effects on the growth of Kentucky bluegrass(Poa pratensis L.) and creeping bentgrass(Agrostis paulstris Huds \"Penncross\") and the chemical properties of soil, which was cellular calcium silicate reproduced by coal ash fly. A field assay was carried out in Young-Pyong Golf Course. The results were as follows. 1. The main chemical composition of CellCaSi was $SiO_2$(45~55%) and CaO(25~35), which was 70~90% of total weight. CellCaSi showed pH 8~9. Bulk density of CellCaSi was 0.35~0.45g/㎤. Water content of CellCaSi was 52.5~67.5%. 2. In the applied plots, leaf width, grass density per $1\textrm{cm}^2$, rhizome number and length per plant, and root number per plant of Kentucky bluegrass(Poa pratensis L.) and creeping bentgrass(Agrostis paulstris Huds \"Penncross\") showed increasing tendency compared with the control. The application of CellCaSi increased the growth of turfgrasses. Their visual quality on hardness, grass shoot density per $1\textrm{cm}^2$ and root growth was very good. And, their visual quality on rhizome growth was good. 3. After the application of CellCaSi, pH, CEC, Ex-cation of the applied soil showed increasing tendency with the little range, $SiO_2$content increasing tendency considerably, and organic matter content decreasing tendency compared with the control.ncy compared with the control.

• 자원리싸이클링
• /
• 제26권2호
• /
• pp.33-38
• /
• 2017

폐기물은 이차연료나 대체연료로 사용될 수 있다. 본 연구에서는 고형연료(SRF)와 건조 하수슬러지를 연소하여 배출되는 중금속 물질을 분석하였다. 석탄, SRF, 건조 하수슬러지의 구리(Cu), 크롬(Cr), 카드뮴(Cd), 니켈(Ni), 아연(Zn), 납(Pb), 비소(As), 수은(Hg) 함량을 조사하였고, 각 물질이 연소가스에서 가스상으로 존재하는 농도를 분석하였다. 실험결과, 가스상으로 배출되는 Cu, Cr, Cd, Ni, Zn, Pb의 양은 매우 적은 것으로 나타났다. 그러나 가스상 수은은 연소 배기가스에서 많은 양이 배출되었다. SRF는 연소 배기가스에서 높은 수은 산화도를 보였고, 건조 하수슬러지는 높은 수준의 수은 배출농도를 보였다.

• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.525-532
• /
• 2014

Since mine wastes were merely dumped in the mine waste dump, they have produced acid mine drainage (AMD). Therefore, main objective of this study was to evaluate the effect of coal combustion products (CCPs) on heavy metal stabilization and detoxification for mine wastes. Total six treatments for incubation test were conducted depending on mixing method (completely mixing and layered). Also, lysimeter experiment was conducted to examine efficiency of polyacrylamide (PAM) on reduction of mine wastes erosion. Result of incubation test showed that concentrations of soluble aluminium (Al) and iron (Fe) in leachate decreased compared to control. The lowest soluble Al and Fe in leachate was observed in 50% mixed treatment (14.2 and $1.03mg\;kg^{-1}$ for Al and Fe respectively) compared to control treatment (253.0 for Al and $52.6mg\;kg^{-1}$ for Fe). The pH of mine wastes (MW) and leachate increased compared to control after mixing with CCPs and ordered as control (MW 6.4, leachate 6.3) < 10% (MW 7.7, leachate 7.1) < 20% (MW 9.0, leachate 7.8) < 30% (MW 9.5, leachate 8.3) < 40% (MW 9.9, leachate 8.5) < 50% (MW 10.5, leachate 8.6). Application of PAM, both in liquid and granular type, dramatically decreased the suspended solid (SS) concentration of CCPs treatments. Reduction of SS loss was ordered as MW70CR30L ($24.4mg\;L^{-1}$) > MW70CR30LPL ($6.7mg\;L^{-1}$) > NT ($3.1mg\;L^{-1}$) > MW70CR30M ($1.6mg\;L^{-1}$) > MW70CR30MPL ($1.1mg\;L^{-1}$) > MW70CR30PGM ($0.7mg\;L^{-1}$) > MW70CR30LPG ($0.5mg\;L^{-1}$) > MW70CR30MPG ($0.4mg\;L^{-1}$). Overall, application of CCPs can be environmental friendly and cost-effective way to remediate coal mine wastes contaminated with heavy metals. In addition, use of PAM could help to prevent the erosion coal mine wastes in mine waste disposal area.

• 대한환경공학회지
• /
• 제33권5호
• /
• pp.301-306
• /
• 2011

본 연구에서는 울산지역의 화력발전소 및 소각로에서 발생하는 비산재, 석탄계 비산재와 폐촉매를 이용하여 수열합성, 용융합성, 용융/수열합성법에 의해 제올라이트를 합성하였다. 석탄계 비산재(F-C1와 F-C2)와 폐촉매(F-W5)는 $SiO_2$와 $Al_2O_3$의 함량이 60.29~89.62 wt%이며, F-C1과 F-C2는 XRD 패턴 분석에서 quartz와 mullite를 포함하고 있었다. 석탄계 비산재와 폐촉매를 이용한 제올라이트 합성은 3가지 합성방법에서 모두 가능하였다. 석탄계 비산재와 폐촉매는 용융합성법에 의해 주로 Na-A형 제올라이트(Z-C1, Z-C2와 Z-W5)로 합성되었으며, 합성된 제올라이트(Z-C1 and Z-C2)는 비산재의 CaO 성분과 합성과정에서 첨가된 Na2CO3에 의해 불순물인 calcite 피크를 형성하였다.

• Geomechanics and Engineering
• /
• 제19권5호
• /
• pp.383-392
• /
• 2019

How to safely and economically dispose mining tailings is a challenge to mine operators. This paper presents an alternative upstream method for tailings dam construction, termed as the template construction method (TCM), which has been successfully implemented at Zhelamuqing tailings impoundment since 2004. By the beginning of 2015, the tailings dam wall had reached 95 m in height for the 46 upstream raises, with the total height of the dam including the starter dyke being 128 m. The proposed TCM is relatively simple and cost-effective and provides a good way for constructing rapidly raising tailings dam based on this case.