• Journal of the Korean institute of surface engineering
• /
• v.35 no.6
• /
• pp.408-414
• /
• 2002

TiN and TiAlN coating layer were deposited on WC-Co steel substrates by an arc ion plating(AIP) technique. The crystallinity and morphology for the deposited coating layers were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The impact behaviors of the deposited TiN and TiAlN coating layer were investigated with a ball-on-plate impact tester. Beyond $10^2$ impact cycle, TiAlN coating layer showed superior impact wear resistance compared to TiN coating layer. On the other hand, both TiN and TiAlN coating layers started to be partially failed between $10^2$ and $10^3$ impact cycle. Above $10^3$ impact cycle, TiN and TiAlN coating layers showed similar impact behavior because of the substrate effect.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.7
• /
• pp.387-394
• /
• 2004

Diamond films were deposited on the cemented tungsten carbide WC-Co cutting insert substrates by using both microwave plasma chemical vapor deposition(MWPCVD) and radio frequency plasma chemical vapor deposition (RFPCVD) from $CH_4$$-H_2$$-O_2$ gas mixture. Scanning electron microscopy and X-ray diffraction techniques were used to investigate the microstructure and phase analysis of the materials and Raman spectrometry was used to characterize the quality of the diamond coating. Diamond films deposited using MWPCVD from $CH_4$$-H_2$$-O_2$ gas mixture show a dense, uniform, well faceted and polycrystalline morphology. The compressive stress in the diamond film was estimated to be (1.0∼3.6)$\pm$0.9 GPa. Diamond films which were deposited on the WC-Co cutting insert substrates by RFPCVD from $CH_4$$-H_2$$-O_2$ gas mixture show relatively good adhesion, very uniform, dense and polycrystalline morphology.

• Journal of Environmental Impact Assessment
• /
• v.20 no.6
• /
• pp.845-856
• /
• 2011

In order to establish fundamental data for stream restoration and environmental flow, we investigated inhabitation and species diversity of fish to substrate size in the typical streams of Geum River Basin. Field monitoring including fish sampling was conducted from October 2007 to October 2009. Substrate size was determined according to six different : silt (Si), sand (Sa), fine gravel (Fg), coarse gravel (Cg), cobbles (Co) and boulders (Bo). A total number of fish caught in the 18 sites was 7,649 representing 10 families 50 species, and Si, Sa, Fg, Cg, Co and Bo stations occupied 30, 29, 38, 30, 27 and 17 species, respectively. The most frequently found species in number was pale chum (Zacco platypus, 29.7%, n=2,275) followed by Z. koreanus (22.5%, n=1,720) in total stations. Biological diversity with increase of substrate size from the dominance of part species showed higher values as dominance index, lower and diversity, richness and evenness index. Index of biological integrity (IBI) and qualitative habitat evaluation index (QHEI) scores decreased with increase of substrate size. Therefore, it is necessary to make an effort on stream rehabilitation with evaluation of physical habitat condition by indicator species in order to maintain biodiversity and perform ecological restoration.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.57-62
• /
• 2012

In this paper, numerical analysis by finite element method, parameter design by the Taguchi method and ANOVA method were used to analyze about effect of design deviations and thickness variations on warpage of FCCSP substrate. Based on the computed results, it was known that core material in substrate was the most determining deviation for reducing warpage. Solder resist, prepreg and circuit layer were insignificant effect on warpage relatively. But these results meant not thickness effect was little importance but mechanical properties of core material were very effective. Warpage decreased as Solder resist and circuit layer thickness decreased but effect of prepreg thickness was conversely. Also, these results showed substrate warpage would be increased to maximum 40% as thickness deviation combination. It meant warpage was affected by thickness tolerance under manufacturing process even if it were met quality requirements. Threfore, it was strongly recommended that substrate thickness deviation should be optimized and controlled precisely to reduce warpage in manufacturing process.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.77-82
• /
• 2004

In this paper, warpages of heterogeneous LTCC substrates comprised of high K/low K hi-layered structure were investigated. The effect of glass content in high K LTCC layer on the warpage of substrate during co-firing process was examined. Shrinkage and dielectric properties of high K and low K green sheets were measured. In-situ camber observation by hot stage microscopy showed different camber development of heterogeneous LTCC substrates according to glass content in high K green sheet. High K green sheet containing $50\%$ glass was matched to low K green sheet in the shrinkage. Therefore, LTCC substrate of Low K/High K+$50\%$ glass structure showed flat surface after sintering.

• Journal of Life Science
• /
• v.2 no.2
• /
• pp.91-96
• /
• 1992

효소에 의한 carotenoid의 co-oxidationgus상은 lipoxygenasechrao하에서 지방산인 linoleic acid가 산화되어 이때 만들어진 free radical에 의해 carotenoid가 쉽게 산화되기 때문에 일어나는 현상이다. 이화같이 carotenoid의 co-oxidation에서 lipoxygenase는 free radical을 만들면서 반응속도를 빠르게 하는 촉매제의 역할을 다음과 같이 담당하고 있다고 할 수 있다. Lipoxygenase에 의한 carotenoid의 co-oxidation 현상을 처음 발견한 것은 대두가루를 밀가루와 혼합하여 사용할 때였다. 대두가루 속에 다량 함유된 lipoxygenase에 의해 밀가루의 carotenoid 색소가 표백되는 것을 보고 이 현상은 lipoxygenase에 의해 기질은 지방산이 산화되는 동안 caroenoid가 쉽게 co-oxidation되기 때문이라는 것을 알아내었다. 즉, carotenoid는 지질이 존재하는 반응시스템에서 항산화제로서 혹은 secondary substrate로서 작용한다고 할 수 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.363-366
• /
• 1998

Shuttered Co-Cr thin films have been developed continuously as one of the major candidates for high density recording media. In this study, Co-26at%Cr thin films with c-axis oriented h.c.p. structure prepared by a improved facing targets sputtering system. We find that the effect of microstructural changes of sputtered Co-Cr thin films on magnetic properties and changes of crystal orientation due to variation substrate temperature.

• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.178-184
• /
• 2018

In the present study, $TiB_2-Co$ composite coatings were thermally sprayed onto the surface of a 304 stainless steel substrate using an atmospheric plasma spray (APS). The phase analysis of the powders and plasma-sprayed coatings was performed using X-ray diffractometry analysis. The microstructures of the coatings were studied by a scanning electron microscope (SEM). The average particle size and flowability of the feedstocks were also measured. Both $TiB_2-32Co$ and $TiB_2-45Co$ (wt.%) coatings possessed typical dense lamellar structures and high-quality adhesion to the substrate. The oxidation behaviors of the coatings were studied at $900^{\circ}C$ in an atmospheric environment. In addition, the cross-sectional images of the oxidized coatings were analyzed by SEM. A thin and well-adhered layer was formed on the surface of both $TiB_2-Co$ coatings, confirming satisfactory high-temperature oxidation resistance. The kinetic curves corresponding to the isothermal oxidation of the coatings illustrated a short transient stage from rapid to slow oxidation during the early portion of the oxidation experiment.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.227-231
• /
• 2014

We fabricated textured polycrystalline $CoFe_2O_4$ thin films on $Pt(111)/TiO_2/SiO_2/Si$ substrate through a sol-gel method. We varied the thickness of the films, by using precursor solutions with different concentrations of 0.1, 0.2, and 0.3 M, and by depositing 5, 8, or 10 layers on the substrate by spin-coating. X-ray diffraction spectra indicated that when the precursor concentration of the solution was higher than 0.1 M, the spin-coated films were preferentially oriented in the <111> direction. Inspection of the surface morphology by scanning electron microscopy revealed that $CoFe_2O_4$ thin films prepared with 0.2 M solution and 5-time spin-coatings had smoother surface, as compared to the other conditions. Each coating had an average thickness of about 50 nm. The magnetic properties measured by vibrating sample magnetometer showed magnetic anisotropy, as evidenced from the difference in the in-plane and out-of-plane hysteresis loops, which we attributed to the textured orientation of the $CoFe_2O_4$ thin films.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.55-60
• /
• 2014

Food waste leachate (FWL) is a serious pollutant waste coming from the food waste recycling facilities in Korea. FWL has a high organic matter content and high COD to nitrogen (COD/N) ratio, which can disturb efficient methane production in the anaerobic digestion of FWL. In the present study a microalga, Clorella vulgaris (C.V), was used as co-substrate for the FWL anaerobic digestion in order to supply nutrients, decrease the COD/N ratio and increase its methane yield. Different co-digestion mixtures (COD/N ratios) were studied by using biochemical methane potential test and modified Gompertz equation for kinetic study. Mixed substrate of FWL and C. vulgaris in the co-digestion clearly showed more the biomethane yield than the sole substrates. The maximum methane production, 827.7 mL-$CH_4$/g-VS added, was obtained for COD/N ratio of 24/1, whereas the highest improvement of methane yield was found for COD/N ratio of 15/1.