• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.656-661
• /
• 2016

Manufacturing membrane materials with high selectivity and permeability is quite desirable but practically not possible, since the permeability and selectivity are usually inversely proportional. From the viewpoint of reducing the cost of $CO_2$ capture, module performance is even more important than the performance of membrane materials itself, which is affected by the permeance of the membrane (P, stagecut) and selectivity (S). As a typical example, when the mixture with a composition of 13% $CO_2$ and 87% of $N_2$ is fed into the module with 10% stage cut and selectivity 5, in the 10 parts of the permeate, $CO_2$ represents 4.28 parts and $N_2$ represents 5.72 parts. In this case, the $CO_2$ concentration in the permeate is 42.8% and the recovery rate of $CO_2$ in this first separation appears as 4.28/13 = 32.9%. When permeance and selectivity are doubled, however, from 10% to 20% and from 5 to 10, respectively, the $CO_2$ concentration in the permeant becomes 64.5% and the recovery rate is 12.9/13 = 99.2%. Since in this case, most of the $CO_2$ is separated, this may be the ideal condition. For a given feed concentration, the $CO_2$ concentration in the separated gas decreases if permeance is larger than the threshold value for complete recovery at a given selectivity. Conversely, for a given permeance, increasing the selectivity over the threshold value does not improve the process further. For a given initial feed gas concentration, if permeance or selectivity is larger than that required for the complete separation of $CO_2$, the process becomes less efficient. From all these considerations, we can see that there exists an optimum design for a given set of conditions.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.819-829
• /
• 2015

This paper presents a shunt active power filter (SAPF) for compensating inter-harmonics and harmonics when inter-harmonics content is evident in the grid. The principle of inter-harmonics generation in the grid was analyzed, and the inter-harmonics effect on repetitive controllers was discussed in terms of control performance. Traditional repetitive controllers are not applicable in inter-harmonic compensation. Moreover, the effect of an ideal controller on harmonics signals was analyzed on the basis of the internal model principle. The repetitive controller was improved in the form of a basis function according to theoretical analysis. The finite-dimensional repetitive controller, which is also called the multiple-period repetitive controller, was designed for the control of multiple periodic signals. A selective harmonic compensation system was developed with SAPF. This system can be used to compensate harmonics and inter-harmonics in the grid. Finally, system control performance was verified by simulation and experimental results.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.4
• /
• pp.226-231
• /
• 2016

In order to remove fog often causes various troubles in our daily lives, the novel defog blower equipped the roller brush made of recycled horse's mane hair was developed. This work presents the overview of new defog devices and the experimental data obtained at two different kinds of defogging experiments. In the model experiment carried out at the enclosed cleanroom ($W5.9m{\times}L5.1m{\times}H2.4m$) targeted a vinyl house, fog was dissipated in less than 30 seconds in case with wind entrainment and two minutes 45 seconds in case without wind entrainment after running of the newly designed defog blower. When the demisting blower was run in a duct, it has an excellent mist sweeping qualities as well as a great removal effect for the background particles (89.5% and 65.4% scavenging rates for fine and coarse particles, respectively). It can be therefore said that the mist eliminator presented in this paper is ideal for use in the sealing space like a vinyl house and the industrial sites where required to remove both harmful mist and particle.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2075-2077
• /
• 1997

An electronic starter using MOSFET is developed to take advantage of ideal preheating and starting features which can extend the lifetime of fluorescent lamps. The preheating curcuit of the developed electronic starter is consisted of three parts - a full wave rectifier curcuit, an FET switching curcuit, and a timer curcuit for the gate switching. The curcuit allows sufficient preheating current flow before the starting to protect lamp filaments, nevertheless it shortens the Preheating time and enables a single pulse ignition at the peak level of the line voltage. Experimental results show that fluorescent lamps of 20-40W range can be initiated within rather short time of $1{\sim}1.5sec$ with preheating current of 0.6A. The electronic starter withstands more than 70.000 cycles switchings without noticeable blackening due to anode spot. These features provide Proper evidences for the advantage of direct replacement with the new starter.

• Journal of Hydrogen and New Energy
• /
• v.13 no.4
• /
• pp.330-338
• /
• 2002

A long-term energy system in the future is expected to be based on the ideal circulation system between water and hydrogen in the sense that the hydrogen prepared from water eventually returns to water again after its use. Currently, with respect to the hydrogen energy system, it is predicted that the turning-point at which the production cost of hydrogen will become to be lower than that of fossil fuels would be after 2010. However, fuel cell technology would be able to be practically used for the applications to the transportation vehicles and small-scale power sources from 2004, and therefore, an efficient construction of the infrastructure covering hydrogen production and supply systems would be required with short-/mid-term technologies for the $CO_2$ reduction associated with fossil fuel utilization. In this paper, the hydrogen quantity available in domestic market has been estimated focusing on the hydrogen by-produced from domestic industries, and also the infrastructure for hydrogen-driven vehicles like fuel cell cars has been reviewed.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.4
• /
• pp.817-820
• /
• 2010

Type 1 diabetes mellitus (T1DM) is an autoimmune disease characterized by extreme insulin deficiency due to an overall reduction in the mass of functional pancreatic ${\beta}$-cells. Several animal models have been used to study T1DM. Amongst these, the mini-pig seems to be the most ideal model for diabetes research, owing to similarities with humans in anatomy and physiology. The purpose of this study was to analyze differentially expressed pancreatic proteins in a streptozotocin (STZ)-induced mini-pig T1DM model. Pancreas proteins from mini-pigs treated with STZ were separated by two-dimensional gel electrophoresis, and 11 protein spots were found to be altered significantly when compared with control mini-pigs. The data in this study utilizing proteomic analysis provide a valuable resource for the further understanding of the T1DM pathomechanism.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.117-128
• /
• 2005

Korea is affected by typhoon 2-3 times a year, and 50${\sim}$60 % of annual rainfall is concentrated during summer with heavy daily precipitation. Recently such natural conditions cause many of failures or damages of reservoirs and embankments. Overflow by heavy flood is the main cause that results 54.2 % of total embankment failures with damages of spillway, outlet channel and stilling basin. Since damages by overflow are triggered by scour of soils nearby the structures, use of proper backfill materials with great resistance against erosion should be considered and application of suitable construction method to protect erosion may be adopted. Most failures of levee are caused by piping along the surface of cross-structure underneath levee. Such failures may be protected by deep consideration of piping at the stage of design and good quality control during construction. Sufficient magnitude of spillway and outlet channel is the ideal way to prevent failures by the flood. For existing structures, remodeling with reinforcement to protect against flood with review of required storage of dam should be considered.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.158.2-158.2
• /
• 2011

DME is acronym of dimethyl ether, which is spotlighted as an ideal fuel to produce hydrogen due to its high hydrogen/carbon ratio, high energy density and easiness to carry. In this research, we calculated thermodynamic hydrogen (or syngas) yield from DME autothermal reforming and compared to other fuels. The reforming efficiency was about 80% above $700^{\circ}C$. Lower OCR has higher reforming efficiency but, it requires additional heat supply since the reactions are endothermic. SCR has no significant effect on the reforming efficiency. The optimized condition is $700^{\circ}C$, SCR 1.5, OCR 0.45 without additional heat supply. Comparing to other commercial gaseous fuels (methane and propane), DME has higher selectivity of $H_2O$ and $CO_2$ than the others due to the oxygen atom in the molecule. To apply DME autothermal reforming to real system, a proper catalyst is required. Therefore, it is performed the experiment comparing various novel metal catalysts based on CGO. Experiments were performed at calculated condition. The composition of product was measured and reforming efficiency was calculated. The catalysts have similar efficiency at high temperature(${\sim}800^{\circ}C$) but, CGO-Ru has the highest efficiency at low temperature ($600^{\circ}C$).

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.325-331
• /
• 2007

Personal identification is essential for the automatic measurement of biosignal information in home healthcare systems. Personal identification is usually achieved with passive radio frequency identification (RFID), which does little more than store a unique identification number. However, passive RFID is not ideal for automatic identification. We present a user identification system based on radio signal strength indication (RSSI) using ZigBee for active RFID tags. Personal identification is achieved by finding the largest RSSI value from aggregated beacon messages that are periodically transmitted by active RFID tags carried by users. Obtaining reliable person!'.! identification without restricting the orientation requires a certain distance between the closest active RFID tag from the ZED and the second closest tag. The results show that the closest active RFID tag from the ZED and the second closest tag must be at least 70 cm apart to achieve reliable personal identification.

• Ocean and Polar Research
• /
• v.35 no.2
• /
• pp.107-121
• /
• 2013

The underwater glider is an autonomous vehicle that can glide through the ocean interior by using a pair of wings attached to its body and can move up and down through the water column by changing its buoyancy. As of now, there are three widely-used gliders, namely, the Spray that was co-developed by Scripps Oceanographic Institution and Woods Hole Oceanographic Institution, the Slocum produced by the Webb Research Cooperation, and the Seaglider that was produced by the University of Washington. In this paper, I will introduce these three gliders and discuss the principles and procedures related to glider operation as well as the application and extendability of modern physical and bio-geochemical sensors to gliders. My experiences in developing a glider for measuring ocean turbulence and testing it 7 times during 12 days are shared in this paper. On the basis of my experiences and knowledge, different kinds of aspects that should be considered for successful glider operation are discussed. In addition, a suggestion is made as to what would be the ideal way to operate underwater gliders in the East/Japan Sea. At the end, the current status of active glider operation teams is presented and the efforts to proceed toward future gliders are briefly introduced.