• Archives of Plastic Surgery
• /
• 제41권4호
• /
• pp.418-420
• /
• 2014

Congenital melanocytic nevus consists of congregations of nevomelanocytes. It is found in approximately 1% of new born infants. Congenital melanocytic nevus needs to be excised before it transforms into a malignant lesion. Many strategies have been attempted for the removal and reconstruction of the nevus. Serial excision enables wound closure to be accomplished with a shorter scar than if the original lesion was elliptically excised in a single stage and reorientation of the scar closer to the relaxed skin lines. The routine utilization of an elliptical serial excision as a standard method of closure often leads to the formation of elongated scars and waste of skin. The "Cogwheel pattern" serial excision is a new technique for reducing the size of the nevus efficiently. Reducing the final scar length, distributing the tension over many directions, and having the chance of decrease in operation numbers are ultimately achieved with the use of the "Cogwheel pattern" serial excision.

• 대한소아치과학회지
• /
• 제3권1호
• /
• pp.7-11
• /
• 1976

The author measured the degree of development and the eruption pattern of first permanent molars with orthopantomography in 553 Korean children(male; 302, female; 251) from 4 to 9 years old. The orthopantomographs were obtained from dept. of pedodontics, college of dentistry, Seoul National University. The results of the studies were as follows: 1. Upper first permanent molars were erupted with distal inclination of about 30 degrees in the early stage and they gradually moved in the mesial direction by bodily movement of the tooth to be in contact with the disto-proximal surface of primary secondary molars in the late stage. 2. Lower first permanent molars were erupted with mesial inclination in the early stage and moved mesially by tipping movement of the tooth to be in contact with the disto proximal surface of the second primary molars in the late stage. 3. The eruptive forces were considered to be main etiologic factors of space closure after the premature loss of primary molars.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.287-292
• /
• 1998

The phenomena of local scour due to a current from a seadike closure gap which is protected by rock, then on to an erodible bed, have been studied. Based on the data of hydraulic model test, the scour characteristics have been investigated for the variation of maximum scour depth with time until reaching equilibrium stage and the shape of ultimate scour hole. A brief evaluation of DHL formula for the relationship between maximum scouring depth and time and a dimensionless form leading to time-scale introduced. On the basis of DHL formula, modified DHL formula denoted DHL-RDC formula is extend to the range of estimation of scour depth compared to DHL formula verified by model test.

• Journal of Chest Surgery
• /
• 제23권5호
• /
• pp.953-961
• /
• 1990

Congenitally corrected transposition of the great arteries is a rare congenital heart anomaly, in isolation, has no hemodynamic consequences. It is usually associated with one or more of a variety of intracardiac lesions, ventricular septal defect, valvular or subvalvular pulmonary stenosis, and deformity of the systemic atrioventricular valve with insufficiency. This report describes a successful two stage operation for congenitally corrected transposition, [SLL] type, with ventricular septal defect, pulmonary atresia, persistent ductus arteriosus, and atrial septal defect. A 9 years old patient underwent modified Blalock-Taussig operation because of severe pulmonary hypoplasia. 2 years later a corrective operation, direct closure of ASD and PDA, VSD closure with Dacron patch, Enlargement of left pulmonary artery with pericardial patch and Relief of ROTO with Rastelli procedure could be successfully performed without complication.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.160-164
• /
• 2007

In the steel industry, there is a need to produce large forged parts for the automobile industries, the flight and shipping industries ad military industries. In the steel-industry application, a cogging technique for cast ingots is required, because the major parts are needed as one large body in order to obtain higher quality. Therefore, cogging process is the primary step in manufacturing of practically large open-die forging. In the cogging process, internal voids have to be eliminated as defects, The present work is concerned with the elimination of the internal voids in large ingots so as obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis are performed to investigate the overlap defect of cast ingots during cogging stage. The measure flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of void closure are performed by using the $DEFORM^{TM}$-3D. The calculated results of void closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the void closure can be investigated by the comparison of practical experiment and numerical analysis.

• Geomechanics and Engineering
• /
• 제15권5호
• /
• pp.1081-1089
• /
• 2018

The deformation and strength of brittle rocks are significantly influenced by the crack closure behavior. The relationship between the strength and deformation of rocks under uniaxial loading is the foundation for design and assessment of such scenarios. The concept of relative crack closure strain was proposed to describe the influence of the crack closure behavior on the deformation and strength of rocks. Considering the crack compaction effect, a new damage constitutive model was developed based on accumulated AE counts. First, a damage variable based on the accumulated AE counts was introduced, and the damage evolution equations for the four types of brittle rocks were then derived. Second, a compaction coefficient was proposed to describe the compaction degree and a correction factor was proposed to correct the error in the effective elastic modulus instead of the elastic modulus of the rock without new damage. Finally, the compaction coefficient and correction factor were used to modify the damage constitutive model obtained using the Lemaitre strain equivalence hypothesis. The fitted results of the models were then compared with the experimental data. The results showed that the uniaxial compressive strength and effective elastic modulus decrease with an increase in the relative crack closure strain. The values of the damage variables increase exponentially with strains. The modified damage constitutive equation can be used to more accurately describe the compressive deformation (particularly the compaction stage) of the four types of brittle rocks, with a coefficient of determination greater than 0.9.

• 한국정밀공학회지
• /
• 제9권1호
• /
• pp.106-117
• /
• 1992

In this study, the propagation behaviour and the closure phenomena of physically small surface cracks were investigated by the techinque of the Kikukawa-unloading elastic compliance method using a back face strain gage. The surface cracks initiated and propagated from notched specimens under constant amplitude bending load. The crack shape (aspect ratio) with approximately semi-circular at the early stage was changed to semi-elliptical as the cracks grew larger. The crack depth (a) could be expressed uniquenly by the crack length (c). The dependence of the crack propagation rate on the stress ratio R was strongly related in the lower ${\Delta}K$ range. The deceleration of the surface crack propagation rate was prominent in lower R during the crack length was small. When the propagation rate was rearranged with the effective stress intensity factor range ${\Delta}$K_{eff} the dependence of the crack propagation rate on the stress ratio R was found to be diminshed. These were caused by the crack closure phenomena that was most prominent at the lower propagation rate. The mechanism of crack closure phenomena was dominated by the plasticity-induced mechanism.

• 소성∙가공
• /
• 제16권4호
• /
• pp.293-298
• /
• 2007

Recently, there is a need to produce a large forged part for the flight, shipping, some energies, and military industries, etc. Therefore, an open die forging technique of cast ingots is required to obtain higher quality of large size forged parts. Cogging process is one of the primary stages in many open die forging processes. In the cogging process prior to some open die forging processes, internal cavities have to be eliminated for defect-free. The present work is concerned with the elimination of the internal cavities in large ingots so as to obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis is performed to investigate the overlap defect of cast ingots during cogging stage. The measured flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of cavity closure is performed by using the $DEFORM^{TM}-3D$. The calculated results of cavity closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the cavity closure can be investigated by the comparison between practical experiment and numerical analysis.

• 대한수의학회지
• /
• 제46권3호
• /
• pp.285-289
• /
• 2006

This study was performed to assess the growth plate closure time with aging in the Korean native goat. Radiographs of proximal and distal epiphysis of humerus, radius, ulna, femur and tibia were obtained at 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 13, 14, 17, 18, 20, 21, 30, 43 and 52 weeks after birth in 30 Korean native goats. The secondary ossification centers were scrutinized and assessed the maturity process on the basis of the criteria(stage 0 to 10). The secondary ossification centers of proximal and distal epiphysis of humerus, radius, femur and tibia and proximal ulna epiphysis appeared immediately after birth. While, that of distal ulna epiphysis appeared during the 1st to 2nd week of life. The fusion of distal humeral epiphysis occurred during the period from 8 to 12 months. The fusion of proximal radial epiphysis and distal tibial epiphysis were found at 1 year. The fusion of proximal and distal epiphysis of ulna and femur, proximal epiphysis of humerus and tibia and distal epiphysis of radius were found at 1 year or more than 1 year. As a result, growth plate closure was highly related to age in the Korean native goat and it is suggested that the estimation of animal's age might be useful by illustration of maturity process of the secondary ossification centers in the Korean native goat.

• Journal of Korean Dental Science
• /
• 제7권1호
• /
• pp.38-42
• /
• 2014

Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is defined as exposed necrotic bone without evidence of healing for at least 8 weeks in the maxillofacial area in a patient with history of bisphosphonate use. Obtaining complete coverage of the hard tissue by soft tissue in BRONJ patients is especially important. Therefore, managing the mucosa is one of the key factors in a successful outcome, but this is especially hard to achieve in BRONJ patients. Various applications of buccal fat pad in oral reconstruction-including the closure of surgical defects following tumor excision, repair of surgical defects following the excision of leukoplakia and submucous fibrosis, closure of primary and secondary palatal clefts, coverage of maxillary and mandibular bone grafts, and lining of sinus surface of maxillary sinus bone graft in sinus lift procedures for maxillary augmentation-have been studied. Eliminating all potential sites of infection and post-operative infection control is crucial in BRONJ. We present a case using the buccal fat pad pedicle for a stage 3 BRONJ defect. Uneventful total epithelialization of the buccal fat pad regardless of size was noted. In summary, the buccal fat pad has versatile application and various recipient sites for surgical utilization. It is an easy technique, with promising overall success rates. With careful selection and handling, buccal fat graft can resolve problems with soft tissue coverage in stage 2 or 3 BRONJ patients.