• 농촌지도와개발
• /
• 제16권2호
• /
• pp.363-384
• /
• 2009

This study aimed at finding directions for Korean agriculture to establish a new paradigm of sustainable development. Various problematic issues and concerns in the environment necessitate the transformation of Korea's development paradigm from unconditional growth to "Green Growth" through new policies on green value and review of various advanced researches. In this research, the environment-friendly agriculture's problems, particularly in agribusiness were analyzed. Drawing from Michael Porter's Value Chain Analysis, this research developed a value chain model in agriculture that reflects the environment and the present situations. Future directions in the agriculture sector were also discussed. Korea realized food self-sufficiency through the green revolution in the early 1970s. However, a lot of problems have also occurred, including ground and water pollution and the destruction of ecosystems as a result of the overuse of pesticides and chemical fertilizers. In the late 1970s, the growing interest on environment-friendly agriculture led to the introduction of sustainable methods and techniques. Unfortunately however, these were not innovative enough to foster environment-friendly agriculture. Thereafter, the consumers' distrust on agricultural products has worsened and concerns about health have increased. In view of this, the Ministry of Food, Agriculture, Forestry and Fisheries introduced in December 1993 a system of Quality-Certified Products for organic and pesticide-free agri-foods. Although a fundamental step toward the sustainability of the global environment, this system was not enough to promote environment-friendly agriculture. In 2008, Korea's vision is for "Low Carbon Green Growth" to move forward while also coping with climate change. But primary sectors in a typical value chain do not consider the green value of their operations nor look at production from an environmental perspective. In order to attain sustainable development, there is a need to use less resources and energy than what is presently used in Korean agricultural and value production. The typical value chain should be transformed into a "closed-loop" such that the beginning and the end of the chain are linked together. Such structure allows the flow of materials, products and even wastes among participants in the chain in a sustained cycle. This may result in a zero-waste sustainable production without destroying the ecosystem.

• 품질경영학회지
• /
• 제33권3호
• /
• pp.126-134
• /
• 2005

This paper proposes a selectively cumulative sum(S-CUSUM) control chart for detecting shifts in the process mean. The basic idea of the S-CUSUM chart is to accumulate previous samples selectively in order to increase the sensitivity. The S-CUSUM chart employs a threshold limit to determine whether to accumulate previous samples or not. Consecutive samples with control statistics out of the threshold limit are to be accumulated to calculate a standardized control statistic. If the control statistic falls within the threshold limit, only the next sample is to be used. During the whole sampling process, the S-CUSUM chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L -consecutive control statistics fall outside the threshold limit. The number L is a decision variable and is called a 'control length'. A Markov chain approach is employed to describe the S-CUSUM sampling process. Formulae for the steady state probabilities and the Average Run Length(ARL) during an in-control state are derived in closed forms. Some properties useful for designing statistical parameters are also derived and a statistical design procedure for the S-CUSUM chart is proposed. Comparative studies show that the proposed S-CUSUM chart is uniformly superior to the CUSUM chart or the Exponentially Weighted Moving Average(EWMA) chart with respect to the ARL performance.

• ETRI Journal
• /
• 제34권1호
• /
• pp.24-34
• /
• 2012

In this paper, the directional carrier sense multiple access/collision avoidance (CSMA/CA) protocol in the immediate acknowledgement mode for IEEE 802.15.3c is analyzed under saturation environments. For the analysis, a sensing region and an exclusive region with a directional antenna are computed probabilistically and a Markov chain model in which the features of IEEE 802.15.3c and the effects of using directional antennas are incorporated is analyzed. An algorithm to find the maximal number of concurrently transmittable frames is proposed. The system throughput and the average transmission delay are obtained in closed forms. The numerical results show the impact of directional antennas on the CSMA/CA media access control (MAC) protocol. For instance, the throughput with a small beamwidth of antenna is more than ten times larger than that for an omnidirectional antenna. The overall analysis is verified by a simulation. The obtained results will be helpful in developing an MAC protocol for enhancing the performance of mmWave wireless personal area networks.

• Management Science and Financial Engineering
• /
• 제15권1호
• /
• pp.1-31
• /
• 2009

This paper considers the value of warehousing contract under probabilistic demands. We consider a supply chain consisting of a supplier, a retailer and its third-party warehousing partner who provides the warehousing service to the retailer through an outsourcing contract. A typical contract is specified by initial space commitment and modification schedule. The retailer decides the order quantity for the supplier and space commitment for the outsourcing contract. Since there is close relationship between order quantity and space commitment to minimize the total cost including ordering cost, inventory carrying cost, shortage cost, and warehousing cost, we develop an analytical model under probabilistic demands, where the retailer can determine the optimal order size and space commitment level jointly. We found the closed-form optimum for a single-period case and the optimal conditions for a two-period case. To evaluate the value of contract flexibility for the two-period case, we compared the total cost under two policies; one with modification, under which the base commitment can be changed at the start of each period and the other without modification. From results of our numerical analysis, we showed that the modification policy is more cost-effective as the variability of demand increases.

• The Journal of Korean Physical Therapy
• /
• 제32권4호
• /
• pp.245-249
• /
• 2020

Purpose: This study examined the effects of local vibration using a massage gun on the triceps surae flexibility by measuring the ankle dorsiflexion range of motion (ROM) compared to static stretching in healthy adults. Methods: Twenty healthy subjects were instructed in this study. They were allocated randomly to two groups: local vibration (LV) and static stretching (SS). The ankle dorsiflexion ROM was measured before and after the intervention in supine (open kinetic chain, OKC) and standing (closed kinetic chain, CKC). The LV group received local vibration using a massage gun for five minutes on their triceps surae, and the SS group stood on the Q board with a dorsiflexed ankle for five minutes. The ROM between pre- and post-intervention and the change in ROM between two groups were analyzed. A paired t-test was used to compare the ROM between pre- and post-intervention, while an independent t-test was used to compare the change in ROM between the two groups. Results: Both groups showed a significant difference between pre- and post-intervention in the position of both the OKC and CKC. The change in ROM, however, was not significantly different between the two groups. Conclusion: The application of local vibration using a massage gun for five minutes on the triceps surae could improve its flexibility as much as the application of static stretching. A massage gun for the application of a local vibration stimulus may be effective, simple, portable, and comfortable.

• The Journal of Korean Physical Therapy
• /
• 제31권4호
• /
• pp.161-168
• /
• 2019

Most athletes with anterior cruciate ligament (ACL) ruptures undergo a surgical ACL reconstruction (ACLR) and rehabilitation. On the other hand, controversy still exists because neither a reconstruction nor rehabilitation have been proven to be superior in the management of ACL injury. This study reviewed the success rates of interventions to provide recommendations for the optimal management after an ACL injury. One of the most important considerations after an ACL injury is the timing and type of intervention. At the early stages, which involve the loss of volume and strength of quadriceps femoral muscle, weight bearing (closed kinetic chain) exercises with pain management followed by high velocity resistance exercises in an open kinetic chain environment are recommended to improve the quadriceps function. After that, it is important to apply intensive isokinetic exercise with a lower extension rate. In this case, it is important to apply overload to the muscles and to simultaneously lead the co-contraction of the hamstrings. Standards are essential because the timing and type of interventions are crucial to prevent re-injury and complications, such as osteoarthritis, as well as to confirm the successful outcome of the treatment. Different interventions recommended for ACL damage have yet to reach consensus. Further studies will be needed to observe the effects of the intervention through multidisciplinary approaches.

• 한국의류학회지
• /
• 제46권6호
• /
• pp.1039-1057
• /
• 2022

The fashion system has been criticized for relying on a linear economy to reduce short-term costs and increase profits. Meanwhile, the circular economy strives to expand the value chain through a closed loop for companies, society, and the environment by separating consumption from resources. This study aims to elucidate the strategic characteristics of the technological measures that fashion companies and brands are trying to innovate into a sustainable fashion system on the basis of the circular economy concept. Thus, we conducted case studies by dividing the value chain of the fashion system into design, production, and consumption to identify the technological development of the circular fashion system from a technologization perspective that incorporates technological values. First, design appeared to strengthen emotional durability, design and process with circulation in mind, and fashion product digitalization. Second, production manifested itself as material development for the new fiber economy, improvement of non-environmental processes, and customization of demand-driven, responsive production. Third, consumption was the spread of the environmental consumption culture through the sharing economy platform, the realization of a virtual wearing experience to prevent rapid disposal, and the provision of information on sustainable consumption.

• 한국언론정보학보
• /
• 제71권
• /
• pp.194-223
• /
• 2015

이 연구는 TV 프로그램 시청 선택 행위에 영향을 미치는 가치 단계 요인을 분석(속성, 기능적 혜택, 심리적 혜택, 시청 가치), 시청자의 어떠한 욕구가 시청 행위와 관계를 가지는지 '가치단계도(HVM, Hierarchical Value Map)'를 밝히는 데에 목적이 있다. 이를 위해 '수단-목적 사슬 이론(Means-end chain theory)'를 적용, 개인적 가치와 시청 행위 간의 인과관계를 측정하였다. 특히 다매체 시대에 태어나 다양한 시청권 활용에 비교적 능숙한 우리나라 20대 대학생들의 TV 시청 행위 가치단계도를 조사하여, 미래 미디어 환경에서 TV의 역할을 조망해 보고자 한다. 이를 위해 이 연구는 APT 래더링을 활용한 구조화된 설문지를 통하여 251명의 자료를 분석하여 TV 장르별(뉴스, 드라마, 코미디) 프로그램 선택의 속성, 기능적 혜택, 심리적 혜택, 시청 가치에 이르는 수단-목적 가치 사슬 구조를 파악하였다. 연구결과, TV 뉴스는 시청각 요소를 통해 빠르고 쉽게 정보를 습득하여 실생활에 도움을 얻는 데에 활용되고 있었고, 개인적 사회생활을 원활히 하는 데에 기여하고 있었다. TV 드라마 선택은 '주변인'의 영향이 크게 작용하였으며, 이들과의 상호작용이 중요한 선택 목적이었다. 프로그램의 사회적 명성과 인기가 중요한 요인이었으며, 채널의 신뢰도, 제작사의 브랜드가 드라마 선택의 요인으로 나타났다. 코미디 프로그램에서는 출연진, 제작진과 프로그램 자체의 명성이 선택의 주요 요인이었다. 시청자들의 프로그램 선택 요인에는 프로그램 신뢰감이 선택의 중요 기본 요인이며, 시청 가치는 타인과 우호 관계 증진, 소속감, 활기찬 삶이 심리적인 속성과 상관관계를 가졌다.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.205-215
• /
• 2001

In this study, modeling and analysis procedure for the dynamic analysis of a high mobility tracked vehicle system were studied. The vehicle model used in this investigation is assumed to be consist of two kinematically decoupled subsystems. The chassis subsystem consists of chassis frame, sprocket, support rollers, road wheels, idler wheel, road wheel arms and idle wheel arm, while the track subsystem is represented as a closed kinematic chain consisting of track links and end connectors interconnected by revolute joints with bushing. Nonlinear contact force module describing the interaction between track link, and sprocket, idler wheel, road wheel, support roller, ground was used. The effects of road wheel arms and idler wheel arm due to tension adjuster are also considered.

• 전자공학회논문지B
• /
• 제31B권1호
• /
• pp.41-48
• /
• 1994

The conventional resolved motion control is not applicable for the control of robots on the spacecraft on account of the floating base of the robots. When the robots perform the assembly or repair operations, the position and attitude of the base satellite are disturbed by the reaction force/moment caused by the robot motion. This reaction will cause error on the robot. motion. Therefore, we define a new type of Jacobian(Extended Jacobian) to minimize the effects of reaction on the accuracy of the robot performing assembly or repair operations. In this paper, we utilize the redundancy of the closed chain system to minimize the effects of the robot motion on the position and attitude of spacecraft. This will results in the accurate assembly and repair operations by the robot.