• Journal of Ginseng Research
• /
• v.23 no.3 s.55
• /
• pp.164-171
• /
• 1999

Microwave-assisted extraction, which is known to rapidly extract target compounds from natural products, was monitored by response surface methodology (RSM) while extracting ginsenosides by using microwave extraction system (MES) equipped with closed vessels, and was confirmed on its extraction efficiency. On the whole, coefficients of determinations $(R^2)$ of the models on ginsenoside contents of extracts with various extraction conditions were above 0.83 (p<0.1). $Ginsenoside-Rb_2,\;-Rc,\;-Re\;and\;-Rg_1$ were maximized in $140^{\circ}C$ of extraction temperature and $50\~75\%$ range of ethanol concentration. Unknown compound peak on HPLC chromatogram observed at extraction temperature over $120^{\circ}C$, increased at the extraction temperature of $150^{\circ}C$. The extraction temperature of $ginsenoside-Rb_2$ and -Re increased from $129^{\circ}C\;to\;147^{\circ}C$ with including unknown compound, and $R^2$ of the models on ginsenoside contents of extracts increased with including unknown compound into ginsenoside $Rb_2$ and Re. Contents of unknown compound were minimized in $67.33\%$ of ethanol concentration, $99.34^{\circ}C$ of extraction temperature and 3.65 min of extraction time. Ginsenoside contents extracted by microwave system for 8 min showed a similar tendency to those of the current extraction method for 40 hrs.

• Economic and Environmental Geology
• /
• v.25 no.4
• /
• pp.447-461
• /
• 1992

The Jurassic granitoids in the study area are divided into the "Gneissose granodiorite" and the "Daebo granodiorite" (1 : 250,000 Jeonju Geological map, 1973). The term of Geochang granodiorite was used in this study instead of "Daebo granodiorite". These granitoids were studied in terms of microscopic observation, petrochemistry, and zircon morphology. The granitoids are mostly granodiorite. Two kinds of progressive variation can also be recognized in the modal quartz~alkali feldspar~plagioclase triangular diagram; the Gneissose granodiorite is in accordance with the trondhjemitic (low k) trend, and the Geochang granodiorite with the granodioritic trend (medium k). The granitoids belong to the calc-alkaline series, and are classified into the I-type (magnetite series). Plagioclase ($An_{25.1}{\sim}An_{30.9}$) in the granitoids shows generally an oligoclase composition. Biotite has a wider range in (Si, Al) solution than in (Fe, Mg) solid solution. Hornblende occurs in a few thin sections of the Geochang granodiorite, and is plotted in the tschermakite field. The zircon prism shows a long variation between the {110} dominant type and the {100} dominant type in the Geochang granodiorite, but only the {110}={100} type in the Gneissose granodiorite. However, zircon crystals in the granitoids are mostly crystallized in a low-to-medium temperature magma. In the PPEF (Prism- Pyramid-Elongation-Flatness) diagram, the Gneissose granodiorite shows a closed scissors type, the Geochang granodiorite, a opened scissors type. It indicates that the Geochang granodiorite might originate from the mixed magma with crustal materials or pre-existed residual magma which had formed the Gneissose granodiorite.

• Korean journal of communication and information
• /
• v.71
• /
• pp.194-223
• /
• 2015

This study explores a value chain structure of TV program including news, drama, and comedy. The purpose of this research focused on factor analysis and the relationship among viewer's program selection motivations. This research explores correlation between personal value and viewing motivation. This study was to identify the value structure of respondent on TV program(news, drama, comedy) based on means-end chain theory. The research used structured APT laddering questions and 251 data was analysed. Through such analysis, category difference by stage and relationship difference were identified and hierarchical value map was compared. There are four different value ladders: first is attributes, functional consequences, psychological consequences, and final value. The result shows that on news program the basic function is viewers are want to visual factor and quickly acquire social news and they pursue a value of personal social relationship. Whereas, on drama program, the viewers are reflected by around person, and they selected a program based on closed related person. In addition, the viewers are influenced by program's social nomination, production's brand in drama, and performer's nomination, producer and program prominence on comedy. The program selection is highly correlated on program selection's credibility, vital energetic life, and social relationship. The results shows that there was no significant difference between low involvement group and high involvement group for main category involvement group respondents.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.2
• /
• pp.216-232
• /
• 2016

In present, the Seoul City is undergoing traffic congestion problems caused by rapid urbanization and population growth. Thus the City government has reorganized the mass transportation system since 2004 and the subway has become a very important means for public transit. Since the subway system is typically a closed environment, the indoor air quality issues have often raised by the public. Especially since a huge amount of PM (particulate matter) is emitted from ground tunnels passing through the subway train, it is now necessary to assess the characteristics and behaviors of fine PM inside the tunnel. In this study, the concentration patterns of $PM_1$, $PM_{2.5}$, and $PM_{10}$ in the Seoul subway line-2 were analyzed by real-time measurement during winter (Jan 13, 2015) and summer (Aug 7, 2015). The line-2 consisting of 51 stations is the most busy circular line in Seoul having the railway of 60.2 km length. The the one-day average $PM_{10}$ concentrations were $148{\mu}g/m^3$ in winter and $66.3{\mu}g/m^3$ in summer and $PM_{2.5}$ concentrations were $118{\mu}g/m^3$ and $58.5{\mu}g/m^3$, respectively. The $PM_{2.5}/PM_{10}$ ratio in the underground tunnel was lower than the outdoor ratio and also the ratio in summer is higher than in winter. Further the study examined structural types of underground subsections to explain the patterns of elevated PM concentrations in the line-2. The subsections showing high PM concentration have longer track, shorter curvature radius, and farther from the outdoor stations. We also estimated the outdoor PM concentrations near each station by a spatial statistical analysis using the $PM_{10}$ data obtained from the 40 Seoul Monitoring Sites, and further we calculated $PM_{2.5}/PM_{10}$ and $PM_1/PM_{10}$ mass ratios near the outdoor subway stations by using our observed outdoor $PM_1$, $PM_{2.5}$, and $PM_{10}$ data. Finally, we could develop pollution maps for outdoor $PM_1$ and $PM_{2.5}$ near the line-2 by using the kriging method in spatial analysis. This methodology may help to utilize existing $PM_{10}$ database when managing and control fine particle problems in Korea.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1615-1627
• /
• 2020

The purpose of this study is to compare and analyze the performance of KOMPSAT-3 Digital Surface Model (DSM) made in overseas testbed area. To that end, we collected the KOMPSAT-3 in-track stereo image taken in San Francisco, the U.S. The stereo geometry elements (B/H, converse angle, etc.) of the stereo image taken were all found to be in the stable range. By applying precise sensor modeling using Ground Control Point (GCP) and DSM automatic generation technique, DSM with 1 m resolution was produced. Reference materials for evaluation and calibration are ground points with accuracy within 0.01 m from Compass Data Inc., 1 m resolution Elevation 1-DSM produced by Airbus. The precision sensor modeling accuracy of KOMPSAT-3 was within 0.5 m (RMSE) in horizontal and vertical directions. When the difference map was written between the generated DSM and the reference DSM, the mean and standard deviation were 0.61 m and 5.25 m respectively, but in some areas, they showed a large difference of more than 100 m. These areas appeared mainly in closed areas where high-rise buildings were concentrated. If KOMPSAT-3 tri-stereo images are used and various post-processing techniques are developed, it will be possible to produce DSM with more improved quality.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.9
• /
• pp.776-787
• /
• 2002

Automation of welding process in shipyards is ultimately necessary, since the welding site is spatially enclosed by floors and girders, and therefore welding operators are exposed to hostile working conditions. To solve this problem, a welding mobile robot that can navigate autonomously within the enclosure has been developed. To achieve the welding task in the closed space, the robotic welding system needs a sensor system for the working environment recognition and the weld seam tracking, and a specially designed environment recognition strategy. In this paper, a three-dimensional laser vision system is developed based on the optical triangulation technology in order to provide robots with 3D work environmental map. Using this sensor system, a spatial filter based on neural network technology is designed for extracting the center of laser stripe, and evaluated in various situations. An environment modeling algorithm structure is proposed and tested, which is composed of the laser scanning module for 3D voxel modeling and the plane reconstruction module for mobile robot localization. Finally, an environmental recognition strategy for welding mobile robot is developed in order to recognize the work environments efficiently. The design of the sensor system, the algorithm for sensing the partially structured environment with plane segments, and the recognition strategy and tactics for sensing the work environment are described and discussed with a series of experiments in detail.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.3
• /
• pp.109-122
• /
• 2020

In recent, projection mapping, which has attracted high attention in the field of realistic media, is regarded as a technology to increase the users' immersion. However, most existing methods perform projection mapping on static objects. In this paper, we developed a technology to track the movements of users and dynamically map the media contents to the users' bodies. The projected media content is built by predefined gestures just using the user's bare hands without the special devices. An interactive immersive media system has been implemented by integrating these dynamic projection mapping technologies and gesture-based drawing technologies. The proposed realistic media system recognizes the movements and open / closed states of the user 's hands, selects the functions necessary to draw a picture. The users can freely draw the picture by changing the color of the brush using the colors of any real objects. In addition, the user's drawing is dynamically projected on the user's body, allowing the user to design and wear his t-shirt in real-time.

• Korean Journal of Remote Sensing
• /
• v.29 no.2
• /
• pp.253-261
• /
• 2013

Current surveying and spatial information technology incorporates information and communication technology and is user friendly. However, it is not convenient to use in the field because a connection to a computer, such as a laptop, tablet PC, or desktop PC, is needed to obtain the survey results and the coordinates of the surveyed points. To solve this problem, we developed an app that can display surveyed data on a map and the current survey results through a connection between a total station and smartphone using a Bluetooth wireless communication device. The app allows users to perform field work simultaneously with office work in the field, because it consists of Bluetooth, closed traverse survey, current status survey, and coordinate conversion modules. The proposed app should increase user convenience and the operational capability of the total station in the field.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.121-131
• /
• 1999

Automatic Rudder Trim System(ARTS) is a device to reduce the pilot's work load for rudder trimming greatly required in varying abruptly aircraft's engine power. This paper represents a technical analysis and a design of control law of the ARTS. The control law of the ARTS is designed based on the analysis of aircraft's characteristics, system's requirements, and limitations. The control law is comprised of open loop control using the rudder trim map for a specific aircraft and closed loop control to compensate the error of the open loop control system. flight test results show that the ARTS can reduce pilot's work load for rudder trimming dramatically and can compensate the aircraft's transient yaw motion.

• BMB Reports
• /
• v.43 no.11
• /
• pp.744-749
• /
• 2010

The aim of this work was to determine whether intrinsically bent DNA sites are present at, or close to, the mammalian replication origins oriGNAI3 and oriB in the Chinese hamster AMPD2 locus. Using an electrophoretic mobility shift assay and in silico analysis, we located four intrinsically bent DNA sites (b1 to b4) in a fragment that contains the oriGNAI3 and one site (b5) proximal to oriB. The helical parameters show that each bent DNA site is curved in a left-handed superhelical writhe. A 2D projection of 3D fragment trajectories revealed that oriGNAI3 is located in a relatively straight segment flanked by bent sites b1 and b2, which map in previously identified Scaffold/Matrix Attachment Region. Sites b3 and b4 are located approximately 2 kb downstream and force the fragment into a strong closed loop structure. The b5 site is also located in an S/MAR that is found just downstream of oriB.