• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.851-858
• /
• 2010

In this study, waste glass and bottom ash were used as basic materials in order to secure a recycling technology of by-products which was mostly discarded and reclaimed. In addition, because softening point of waste glass is less than $700^{\circ}C$ and bottom ash includes combustible material, it was possible to manufacture low-temperature sintering lightweight aggregates for energy saving at $800{\sim}900^{\circ}C$ that it is as much as 20~30% lower than sintering temperature of existing lightweight aggregates. Thermal conductivity of newly-developed lightweight aggregates was 0.056~0.105W/m. K and its porosity was 40.36~84.89%. A coefficient of correlation between thermal conductivity and porosity was -0.97, it showed very high negative correlationship. With this, we were able to verify that porosity is key factor to affect thermal conductivity. Microstructure of lightweight aggregates by $CaCO_3$ content and replacement ratio of bottom ash in the variation of temperature were that $CaCO_3$ content increased along with pore size while replacement ratio of bottom ash increased as pore size decreased. Specially, most pores were open pore instead of closed pore of globular shape when replacement ratio of bottom ash was 30%, and pore size was small about 1/10~1/5 as compared with case in bottom ash 0~20%. In addition, open pore shapes were remarkably more irregular form of open pore in $900^{\circ}C$ than $700^{\circ}C$ or $800^{\circ}C$ when replacement ratio of bottom ash was 30%. We reasoned hereby that these results will influence on absorption increase, strength and thermal conductivity decrease of lightweight aggregates.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.357-367
• /
• 2001

The purpose of this study was to investigate the alveolar bone turnover in diabetic rat, and to compare the alveolar bone turnover during tooth movement in diabetes with that in normal control Eighty Male Sprague-Dawley strain rats(8th week) were divided into normal control(N), normal-tooth movement (N-tm), diabetes(D), and diabetes-tooth movement(D-tm) groups. Eighteen days before the start of the experiment, diabetes was induced with a single injection of streptozotocin 50 mg/kg of body weight in citrate buffer as vehicle via the tail vein. Maxillary first molars of rats were moved mesially by 40 grams of the closed coil spring. Experimental animals were sacrificed after 1d, 3d, 7d, and 14d experimental period, and the alveolar bone around the maxillary first molars were assayed biochemically for acid phsophatase(ACP) and tartrate-resistant acid phosphatase (TRAP) as bone resorption markers, and alkaline phosphatase(ALP) and osteocalcin(OC) as bone formation markers. TRAP and OC concentration in serum and alveolar bone of D group were lower than those in N group, and especially OC concentration decreased mote following diabetes prolonged, which showed the decreased skeletal and alveolar bone resorption and formation potential in diabetic rats. In N-tm group compared with N group, alveolar bone ACP and TRAP concentrations were highest at 1d and 3d(p<0.01), decreased after then, and showed lowest at 14d, and alveolar bone OC concentration was higher at 3d, 7d, and 14d(p<0.001) and showed a tendency of peak level at 7d. which showed the peak of concentration of bone resorption markets at 1d-3d and those of bone formation markers at 7d. In D-tm group compared with N group, alveolar bone ACP and TRAP concentrations were higher at 3d, 7d and 14d(p<0.001), and tended to reach peak value at 7d and persisted through 14d, and alveolar bone ALP and OC concentration increased but not different from that of N group. The amount of tooth movement in D group were greater than that of N group at all experimental period. Those results were suggested that during diabetes, the alveolar and skeletal bone undergo low bone turnover and the mote amount of tooth movement, hut because the peak time of alveolar bone resorption activity was delayed and sustained in longer period of tooth movement and alveolar bone formation activity is lower than that of normal tooth movement, the periodontal space is supposed to be larger doting tooth movement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of Radiation Protection and Research
• /
• v.40 no.3
• /
• pp.124-131
• /
• 2015

Radiation exposure to humans can be caused by the gamma rays emitted from natural radioactive elements(such as uranium, thorium and potassium and any of their decay products) of Naturally Occurring Radioactive Materials(NORM) or Technologically Enhanced Naturally Occurring Radioactive Materials(TENORM) added consumer products. In this study, assume that activity of radioactive elements is $^{238}U$, $^{235}U$, $^{232}Th$ $1Bq{\cdot}g^{-1}$, $^{40}K$ $10Bq{\cdot}g^{-1}$ and the gamma rays emitted from these natural radioactive elements radioactive equilibrium state. In this study, reflected End-User circumstances and evaluated annual exposure dose for products based on ICRP reference voxel phantoms and ICRP Recommendation 103 using the Monte Carlo Method. The consumer products classified according to the adhere to the skin(bracelet, necklace, belt-wrist, belt-ankle, belt-knee, moxa stone) or not(gypsum board, anion wallpaper, anion paint), and Geometric Modeling was reflected in Republic of Korea "Residential Living Trend-distributions and Design Guidelines For Common Types of Household.", was designed the Room model($3m{\times}4m{\times}2.8m$, a closed room, conservatively) and the ICRP reference phantom's 3D segmentation and modeling. The end-user's usage time assume that "Development and Application of Korean Exposure Factors." or conservatively 24 hours; in case of unknown. In this study, the results of the effective dose were 0.00003 ~ 0.47636 mSv per year and were confirmed the meaning of necessary for geometric modeling to ICRP reference phantoms through the equivalent dose rate of belt products.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.474-480
• /
• 2004

The purpose of this in vitro study was to compare the remineralizing effects of three glass ionomer cements (high filled glass ionomer cement, compomer, resin modified glass ionomer cement) with resin composite (control group) on incipient interproximal caries, and to assess long-term change of remineralization effect, in each material, evaluated by microtomography. Proximal restoration was simulated with tooth specimen and Glass Ionomer Cements. And each of these groups was placed into a closed container with artificial saliva at $37^{\circ}C$ and pH 7.0 for a time period of thirty days with constant circulation. At the end of thirty and sixty days, tomographic images were taken from these specimens with micro CT scanner. Materials used in this study were as follows. Group 1: Fuji IX GP (GC Corp., Tokyo, Japan) Group 2: Vitremer (3M ESPE, St. Paul, Minn., USA) Group 3: F2000 (3M ESPE, St. Paul, Minn., USA) Group 4: Z250 (3M ESPE, St. Paul, Minn., USA) Using density-measuring program, the micro-density of carious lesions on the specimens were measured. The mean density changes of each group were compared to the other groups to evaluate the effect of remineralization. The results were as follows: 1. The lesion density of all groups increased. 2. The mean density increase of Group 1, 2, 3 were higher than that of Group 4 every month(p<0.05). 3. There were significant differences of density increase among glass ionomer group(Group 1, 2, 3).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.244-249
• /
• 2011

This in vitro study compared the remineralization of incipient interproximal caries in the presence of three glass ionomer cements(highly-filled glass ionomer cement, resin-modified glass ionomer cement, compomer) and a resin composite(control). Thirty-two extracted premolars were selected based upon the lack of any visible demineralization. The teeth were coated in a transparent acid resistant nail varnish leaving $3{\times}3$ mm square. The teeth were subjected to the demineralizing buffer for 3 days and quantitative light-induced fluorescence(QLF) images of the subjects were taken. Proximal restoration was simulated by placing tooth specimens and the various glass ionomer cements in closed containers with artificial saliva at $37^{\circ}C$ and pH 7.0 with constant circulation. Further QLF images were subsequently taken at 30, 60, and 90 days. The changes of mineral loss(${\Delta}Q$) were evaluated by QLF and the change of ${\Delta}Q$(${\Delta}{\Delta}Q$) were compared between groups in order to evaluate the effects of remineralization. All data were analyzed using ANOVA and the post-HOC Dunnett C multiple comparison test at p<0.05. While ${\Delta}Q$(changes of mineral loss) increased for all treatments, the increases for three glass ionomer groups were significantly higher than that for the resin group at first month period. As time went on, the amount of ${\Delta}{\Delta}Q$ decreased.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.60-64
• /
• 2014

These studies were conducted to identify the effects of non-perforated breathable package film on storability at $1^{\circ}C$, $8^{\circ}C$, and $20^{\circ}C$ storage of 'Fuji' apples. The fresh weight loss rate was less than 2.0% in all non-perforated breathable films at three different storage periods and temperatures, $1^{\circ}C$; 210 days, $8^{\circ}C$; 75 days, and $20^{\circ}C$; 30 days except for the perforated film. 1,300 cc ($1^{\circ}C$), 5,000 cc ($8^{\circ}C$), and 10,000 cc ($20^{\circ}C$) films were closed at the optimum MA storage condition by carbon dioxide and oxygen concentration. Ethylene concentration was lowest at the 40,000 cc film in every temperatures during storage. The 1,300 cc film established higher result in soluble solid and vitamin C content than any other films at $1^{\circ}C$, also showed higher in visual quality by panel test. The 5,000 cc film had the best results on soluble solid and off-flavor in $8^{\circ}C$. In the $20^{\circ}C$ storage after 30 days of treatment the 10,000 cc film had highest firmness and visual quality. Following these results, it come to conclusion the suitable type of non-perforated breathable film such as 1,300 cc at $1^{\circ}C$, 5,000 cc at $8^{\circ}C$, and 10,000 cc at $20^{\circ}C$ for MA storage in 'Fuji' apples.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.383-390
• /
• 2014

This study was conducted to investigate the growth characteristics of cucumber scion and pumpkin rootstock under different levels of light intensity (photosynthetic photon flux, PPF) and plug cell size in a closed transplant production system with artificial lighting. Cucumber scion and pumpkin rootstock seedlings were grown under the combinations of three levels of PPF (PPF 165, 248, and $313{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and five types of plug tray (50, 72, 105, 128, and 200 cells in the tray) for nine days. The shoot dry weight and relative growth rate increased with increasing PPF and plug cell size. As PPF increased, cucumber scion and pumpkin rootstock seedlings had higher dry matter, lower specific leaf area, and lower hypocotyl length. The first true leaf of cucumber scion and pumpkin rootstock unfolded at eight and seven days after sowing, respectively, except the treatment using 200-cell plug tray. The unfolding of first true leaf of seedlings grown in 200-cell plug tray was delayed by one day. Accordingly, it was considered that the use of small cell size such as 200-cell plug tray would require more time for the production of scion and rootstock. Based on the results, we suggest that cucumber scion and pumpkin rootstock be grown in 105-cell to 128-cell plug tray for eight days and 72-cell to 105-cell plug tray for seven days, respectively, when using splice grafting method with root-removed rootstock. Additionally, higher PPF is suggested to improve the growth and quality of scion and rootstock.

• Clinical and Experimental Pediatrics
• /
• v.49 no.3
• /
• pp.287-291
• /
• 2006

Purpose : Aneurysms of sinus valsalva are rare anormalies thought to be primarily congenital in origin, progressing into death by acute heart failure in cases of rupture. Surgical correction is the only method of treatment. With these clinical implications, we reviewed the clinical characteristics and surgical results of patients with ruptured sinus of valsalva aneurysm. Methods : Between January 1991 and February 2004, 17 patients with ruptured sinus of valsalva aneurysm were retrospectively reviewed for their clinical symptoms, physical findings, past history, coexistent cardiac anormalies, surgical results, and mid-term prognosis. Results : The 17 patients included 13 men and four women, with a mean age of 30 years(10-59 years). Preoperatively accompanying cardiac anormalies were ventricular septal defect(VSD, eight cases of doubly committed juxta-arterial VSD) and aortic insufficiency(11 cases). During operations, patterns of fistulous tracts were found to be right colonary sinus-right ventricle in 13 patients, right coronary sinus-right atrium in one, noncoronary sinus - right ventricle in two, noncoronary sinus - right atrium in one, and VSD was noticed in 14 patients(all were doubly committed juxta-arterial in type). The defects were closed with a patch in 13 patients, without a patch in four, with concommitant aortic valve replacement in four and with aortic valvuloplasty in two. There were no mortalities during operations or the mid-term follow-up periods($40{\pm}49$ months). Conclusion : Because, at least in Orientals, VSD(especially doubly committed juxta-arterial) was accompanied in large numbers of patients with aneurysms of sinus valsalva, preoperative evaluations of this congenital heart disease should be made very careful. And we may need to revise the algorithm of treatment policy in small sized doubly committed juxta-arterial VSD.

• Journal of Bio-Environment Control
• /
• v.24 no.1
• /
• pp.21-26
• /
• 2015

This study was conducted to compare the aromatic compounds and the internal quality such as total phenolic contents, DPPH activity, and vitamin C contents in two new forma (red type and dalgom) and gom-chwi (Ligularia fischeri). Total phenolic contents were indicated 137.29mg/100g fresh wt. in gom-chwi, 158.40mg/100g fresh wt. in red type, and 180.82mg/100g fresh wt. in dalgom, red type and dalgom had higher contents than gom-chwi. DPPH activities were appeared similar result in gom-chwi (74.45%) and red type (75.59%), and dalgom (86.26%) had better than others. In vitamin C contents, gom-chwi and red variety had shown very closed results but dalgom had best result (1.81mg/100g fresh wt.). Essential oil contents of red type (0.164% of fresh wt.) and dalgom (0.290% of fresh wt.) had higher contents than gom-chwi (0.060%). Analysis of major components of essential oil by GC/MSD, identified 43 compounds in gom-chwi, 44 compounds in red type, and 31 compounds in dalgom. N-containing compound only detected in dalgom. Comparison of six aromatic compounds for fragrance (a-pinene, ${\beta}$-pinene, ${\beta}$-phellandrene, a-phellandrene, 3-carene, and limonene) was indicated red type had higher contents and dalgom had lower contents than gom-chwi. Dalgom had higher contents of total phenolic, DPPH activity, vitamin C, and essential oil than red type and gom-chwi. This result had shown the dalgom had better characters for new cultivar.