• Journal of Agricultural Extension & Community Development
• /
• v.1 no.1
• /
• pp.37-45
• /
• 1994

This study was conducted to investigate the organizational climate of the agricultural extension education agencies and its influence on their educators` attitude toward job in Korea. The specific objectives of the study were 1) to identify the educators` perception of the organizational climate in the agricultural extension education agencies, and 2) to determine whether or not the educators` perception of the organizational climate influnce on their attitude toward job. Organizational climate has bees defined by many scholars as the properties of the social psychological environment perceived by organization members. There are various theoretical interpretations offered by die scholas about the effect of organizational climate upon organization members` behavior. Through a series of the theoretical reviews, this study could draw more than twenty variables in four types of organizational climate which might be perceived by the educators of agricultural extension education agencies and might influence upon their attitude toward job. The data were collected mainly through questionnaires sent to the responsible officers for administering the questionnaires for all adult educators of 30 agricultural extension education agencies randomly sampled from the population of 190 agencies. After data cleaning, a total of 629 responded questionnaires were analyzed for the study. The statistical methods used in the study were percentile, correlation, one way analysis of variance and multiple regression analysis. The two major findings of the study were as follows : 1. The organizational climate of agricultural extension education agencies were classified into four types : 1) democratic-autonomous, 2) cooperative-friendly, 3) achievement-oriented, and 4) bureaucratic-authoritarian. Among these of organizational climates, the cooperative-friendly one was most positively but the bureaucratic-authoritarian one was least positively perceived by the educators. 2. The educators` potion of the organizational climate and their attitude toward job were significantly correlated. The educators` perception of the organizational climate explained 41 percent of the variance of their attitude toward job in a multiple regression analysis In particular, the perception of the achievement oriented type of the organizational climates alone explained 34 percent of the variance of the favorable attitude.

• Korean Journal of Clinical Laboratory Science
• /
• v.42 no.1
• /
• pp.22-31
• /
• 2010

The most common sources of biological trace material which are found in crime scene are the human bloodstains. Reliable identification in the forensic casework is important as it provides crucial insights into crime scene reconstruction and can thus contribute towards solving crimes. Blood-stains are routinely tested in forensic practise using various methods including the leucomalachite green (LMG) test, Kastle-Meyer phenolphthalein test, tetramethylbenzidine test, orthotolidine test, or the luminol chemoluminescence test with the latter cleaning attempts. All these presumptive thus indicative but not identifying tests take advantage of the peroxidase-like activity of the heme unit of the hemoglobin molecule in human blood. Therefore, false-positive results can be caused by the presence of strong oxidants, such as chlorine-containing detergents or by true peroxidases (e.g., from plants). In this study, composition for Gum guaiac was evaluated for the forensic identification of bloodstain and compared with the LMG. The sensitivity and specificity of the composition for Gum guaiac were examined more stable in bloodstain. The positive of Composition for Gum guaiac shown even with the 100,000-fold diluted bloodstain, which was no difference in comparison with LMG test. It was shown that composition for Gum guaiac was very stable to resist boiling for 20 minutes and the effect of bacteria did not affect the genetic analysis as well. The above result of the crime scene investigation, composition for Gum guaiac is easily expected to help identifying bloodstain in the evidences.

• The Journal of the Korean dental association
• /
• v.56 no.2
• /
• pp.84-93
• /
• 2018

Purpose: This study evaluated the apical root canal system of maxillary second molars, in which conventional endodontic treatment had failed. Materials and Methods: One hundred eighteen extracted endodontically failed maxillary second molars were examined to investigate the root canal morphology using clinical photographs. High-resolution cross-sectional images at the 3mm level from the root apices were taken to evaluate the anatomic variations and canal cleanliness. The incidence of anatomic variations and canals containing debris were evaluated statistically. Results: One (0.85%) maxillary second molar had four separate roots, while 52 (44.07%) had three separate roots. The remaining 65 (55.08%) showed 6 different types of fusion in their roots. As the number of fused roots increased from none to three, the incidence of isthmuses in the cross-sectional images increased significantly from 43.40% to 76.92% in 2-root fusion and 88.46% in 3-root fusion. In addition, the occurrence of less-cleansed canals increased from 22.64% to 38.46% and 53.85%, respectively (p<0.05). Sixty four teeth (54.24%) had 3 canals while 38(32.2%) had additional canals; most of them were located in the MB roots (81.58%). Seventy six (64.41%) had isthmuses in the apical region and 58 out of 76 were located in MB roots. Condlusions: Logistic analysis indicated that the less division of roots was associated significantly with the occurrence of insufficient cleaning during endodontic treatment (OR=1.765, p<0.05), while the presence of an additional canal showed no association.

• Restorative Dentistry and Endodontics
• /
• v.45 no.3
• /
• pp.38.1-38.10
• /
• 2020

Objectives: This study aimed to evaluate vital pulp tissue removal from different endodontic instrumentation systems from root canal apical third in vivo. Materials and Methods: Thirty mandibular molars were selected and randomly divided into 2 test groups and one control group. Inclusion criteria were a positive response to cold sensibility test, curvature angle between 10 and 20 degrees, and curvature radius lower than 10 mm. Root canals prepared with Hero 642 system (size 45/0.02) (n = 10) and Reciproc R40 (size 40/0.06) (n = 10) and control (n = 10) without instrumentation. Canals were irrigated only with saline solution during root canal preparation. The apical third was evaluated considering the touched/untouched perimeter and area to evaluate the efficacy of root canal wall debridement. Statistical analysis used t-test for comparisons. Results: Untouched root canal at cross-section perimeter, the Hero 642 system showed 41.44% ± 5.62% and Reciproc R40 58.67% ± 12.39% without contact with instruments. Regarding the untouched area, Hero 642 system showed 22.78% ± 6.42% and Reciproc R40 34.35% ± 8.52%. Neither instrument achieved complete cross-sectional root canal debridement. Hero 642 system rotary taper 0.02 instruments achieved significant greater wall contact perimeter and area compared to reciprocate the Reciproc R40 taper 0.06 instrument. Conclusions: Hero 642 achieved higher wall contact perimeter and area but, regardless of instrument size and taper, vital pulp during in vivo instrumentation is not entirely removed.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.4
• /
• pp.246-251
• /
• 2003

The blood-brain barrier (BBB) is composed of the brain capillaries, which are lined by endothelial cells displaying extremely tight intercellular junctions. Several attempts at creating an in vitro model of the BBB have been met with moderate success as brain capillary endothelial cells lose their barrier properties when isolated in cell culture. This may be due to a lack of recreation of the in vivo endothelial cellular environment in these models, including nearly constant contact with astrocyte foot processes. This work is motivated by the hypothesis that growing endothelial cells on one side of an ultra-thin, highly porous membrane and differentiating astrocyte or astrogliomal cells on the opposite side will lead to a higher degree of interaction between the two cell types and therefore to an improved model. Here we describe our initial efforts towards testing this hypothesis including a procedure for membrane fabrication and methods for culturing endothelial cells on these membranes. We have fabricated a 1 $\mu\textrm{m}$ thick, 2.0 $\mu\textrm{m}$ pore size, and 55% porous membrane with a very narrow pore size distribution from low-stress silicon nitride (SiN) utilizing techniques from the microelectronics industry. We have developed a base, acid, autoclave routine that prepares the membranes for cell culture both by cleaning residual fabrication chemicals from the surface and by increasing the hydrophilicity of the membranes (confirmed by contact angle measurements). Gelatin, fibronectin, and a 50/50 mixture of the two proteins were evaluated as potential basement membrane protein treatments prior to membrane cell seeding. All three treatments support adequate attachment and growth on the membranes compared to the control.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.294-303
• /
• 2016

Purpose: This study aimed to evaluate the profitability of four selective mechanization systems in rice cultivation. Methods: Field experiments were conducted in the farmers' field during the wet season (June to November) of 2015 in Bangladesh. Mechanization systems were applied to evaluate four different selective levels (treatment) in eleven consequent operations. Seedlings were raised in a traditional seedbed and trays for manual and mechanical transplanting, respectively. Land preparation, irrigation, fertilizer, pesticide, carrying, and threshing and cleaning operations were performed using the same method in all the experimental plots. The mechanical options in the transplanting, weeding, and harvesting operations were changed. The mechanization systems were $S_1$ = hand transplanting + hand weeding + harvesting by sickle, $S_2$ = mechanical transplanting + Bangladesh Rice Research Institute (BRRI) weeder + reaper, $S_3$ = mechanical transplanting + BRRI power weeder + reaper, and $S_4$ = mechanical transplanting + herbicide + reaper. This experiment was performed in a randomized complete block design with four replications. Power tiller, rice transplanter, BRRI weeder, BRRI power weeder, self-propelled reaper, BRRI open drum thresher, and BRRI winnower were used in the respective operations. Accordingly, the techno-economic performances of the different technologies were calculated and compared with those of the traditional system. Results: The mechanically transplanted plot produced 6-10% more yield than the hand transplanted plot because of the use of tender-aged seedlings. Mechanical transplanting reduced 61% labor and 18% cost compared to manual transplanting. The BRRI weeder, BRRI power weeder, and herbicide application reduced 74, 91, and 98% labor, respectively. The latter also saved 72, 63, and 82% cost, respectively, compared to hand weeding. Herbicide application reduced the substantial amount of labor and cost in the weeding operation. Mechanical harvesting also saved 96% labor and 72% cost compared to the traditional method of harvesting using sickle. Selective mechanization saved 15-17% input cost compared to the traditional method of rice cultivation. Conclusions: Mechanical transplanting with the safe use of herbicide and harvesting by reaper is the most cost- and labor-saving operation. The method might be the recommended set of selective mechanization for enhancing productivity.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.550-555
• /
• 2018

This study aims to identify and compare contents and keywords used in articles related to blockchain applications to various industries. The text mining and Semantic Network Analysis, as methods of keyword network analysis, were used to analyze articles including terms of 'finance' 'energy' and 'logistics', which media and government frequently mentioned as areas that can apply blockchain technologies. For this study, data were collected from 43,093 articles from January, 2017 through July, 2018. Data crawling was carried out by using Python BeautifulSoup and data cleaning was performed in order to eliminate mutual redundancies of the three terms. After that, text mining and semantic network analysis were performed using Textom and UCInet for network analysis between keywords. The results showed that all the three terms were similar in terms of 'technology', but there were differences in the contents of 'government policy' or 'industry' issues. In addition, there were differences in frequencies and centralities of these terms.

• Tribology and Lubricants
• /
• v.35 no.5
• /
• pp.274-285
• /
• 2019

Chemical mechanical polishing (CMP), which is a material removal process involving chemical surface reactions and mechanical abrasive action, is an essential manufacturing process for obtaining high-quality semiconductor surfaces with ultrahigh precision features. Recent rapid growth in the industries of digital devices and semiconductors has accelerated the demands for processing of various substrate and film materials. In addition, to solve many issues and challenges related to high integration such as micro-defects, non-uniformity, and post-process cleaning, it has become increasingly necessary to approach and understand the processing mechanisms for various substrate materials and abrasive particle behaviors from a tribological point of view. Based on these backgrounds, we review recent CMP R&D trends in this study. We examine experimental and analytical studies with a focus on substrate materials and abrasive particles. For the reduction of micro-scratch generation, understanding the correlation between friction and the generation mechanism by abrasive particle behaviors is critical. Furthermore, the contact stiffness at the wafer-particle (slurry)-pad interface should be carefully considered. Regarding substrate materials, recent research trends and technologies have been introduced that focus on sapphire (${\alpha}$-alumina, $Al_2O_3$), silicon carbide (SiC), and gallium nitride (GaN), which are used for organic light emitting devices. High-speed processing technology that does not generate surface defects should be developed for low-cost production of various substrates. For this purpose, effective methods for reducing and removing surface residues and deformed layers should be explored through tribological approaches. Finally, we present future challenges and issues related to the CMP process from a tribological perspective.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.379-385
• /
• 2018

Purpose: Postharvest handling of onions (harvesting, cleaning, grading, cooling, storing, and transport) should be performed continually to reduce costs and improve quality. The purpose of this study is to a) determine the design parameters and operating conditions of anion auto-dumping that constitutes a key component of the postharvest bulk handling machinery system, and b) to perform a performance test with the auto-dump prototype system. Methods: Kinematic analyses and computer simulations of the auto-dump mechanism were applied to analyze the operating conditions and design parameters. Results: The optimum working condition for the auto-dump was determined from kinetic analyses. In addition, the interaction between the velocity of the hydraulic cylinder and the angular velocity of the auto-dump were analyzed in order to control the bulk handling machinery system. The acting forces and optimum operating conditions of the hydraulic cylinder were determined by analyzing the forces related to the mass of inertia of the auto-dump assembly during rotation. The method of controlling the feeding rate of onions in terms of the uniformity of the stacking pattern and the control of the entire system was better than the two-stage method of controlling the rotational speed of the auto-dump. Based on the performance test with the prototype for the auto-dump, the stacking pattern and rigidity of the system were analyzed. Conclusions: These results would be of great importance in the postharvest bulk handling machinery system for onions.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.320-330
• /
• 2018

Purpose: The aim of this study was to investigate the harvesting performance of a prototype small combine for buckwheat and adlay. Methods: The prototype small combine was designed and constructed. Its ratio of grain loss, ratio of output components in the grain outlet, and field capacity for harvesting buckwheat and adlay were analyzed through field tests. Results: The prototype small combine required a working width of about 0.6 to 0.7 m to harvest buckwheat. The maximum travel speed was about 0.36 m/. The total ratio of grain loss was about 21.6%, which consisted of 8.8% at the header and 12.8% at the dust outlet. The grain and the material other than grain (MOG) ratios at the grain outlet were 94.1% and 5.9% respectively. In the case of adlay harvest, the maximum working width was about 1.2 m, that is, two rows. The range of maximum travel speed was about 0.45 to 0.46 m/s. When adlay was harvested in one row, the total ratio of grain loss ranged from 36.3 to 42.8% according to the cutting height. The cutting height of 30 cm resulted in a higher total ratio of grain loss than 60 cm and 90 cm. When the cutting height was 60 cm, there was no significant change in the total ratio of grain loss according to the number of working rows and the stage of the primary transmission shift. The total ratio of grain loss ranged from 35.2 to 37.7%. The grain and the MOG ratios at the grain outlet ranged from 93.1 to 95.8% and from 4.2 to 6.9%, respectively. No significant difference was observed in relation to cutting height, number of working rows, and the stage of the primary transmission shift. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops showed good potential for the efficient harvesting of buckwheat and adlay. However, to improve the harvesting performance, there seems to be a need to develop new crop varieties suitable for machine-based harvesting and improve the transmissions, reels, separation/cleaning systems.