• Tribology and Lubricants
• /
• v.40 no.3
• /
• pp.91-96
• /
• 2024

Recently, extensive studies have been carried out to enhance various performance aspects such as the durability, lifespan, and hardness by combining diverse materials or developing novel materials. The utilization of superhydrophobic surfaces, particularly in the automotive, textile, and medical device industries, has gained momentum to achieve improved performance and efficiency. Superhydrophobicity refers to a surface state where the contact angle when water droplets fall is above 150°, while the contact angle during sliding motion is smaller than 10°. Superhydrophobic surfaces offer the advantage of water droplets not easily sliding off, maintaining a cleaner state as the droplets leave the surface. Surface modification involves two fundamental steps to achieve superhydrophobicity: surface roughness increase and surface energy reduction. However, existing methods, such as time-consuming processes and toxic organic precursors, still face challenges. In this study, we propose a method for superhydrophobic surface modification using lasers, aiming to create roughness in micro/nanostructures, ensuring durability while improving the production time and ease of fabrication. The mechanical durability of superhydrophobic samples treated with lasers is comparatively evaluated against chemical etching samples. The experimental results demonstrate superior mechanical durability through the laser treatment. Therefore, this research provides an effective and practical approach to superhydrophobic surface modification, highlighting the utility of laser treatment.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.214-230
• /
• 2022

This paper discusses the characteristics and background of the production of white porcelain with the "Byeol(別)" inscription. Such porcelain was produced by the government-run porcelain kiln, Gwanyo(官窯), in the 16th and 17th centuries (from the 1560s to the 1640s), during the Joseon dynasty. The white porcelain ware, inscribed with either the term Byeol or "jwa(左)" and "u(右)," constituted a dual production system of white porcelain by Gwanyo starting in the 1560s. However, to date, few studies have examined Byeol-inscribed white porcelain. This, therefore, makes it difficult to achieve a comprehensive understanding of the evolution of inscriptions on the white porcelain produced by Gwanyo in the 15th to 17th centuries. Besides a regular annual stock of porcelain(年例進上磁器), Gwanyo also produced and supplied additional porcelain ware, or Byeol-gi, at the behest of the royal family or the court of Joseon. Byeol-inscribed white porcelain is a form of Byeol-gi, produced through extra firing, or Byeolbeon(別燔). According to use, Byeol-gi can be categorized as an item for national use(國用) or an item for internal use(內用). However, if the porcelain only carries the "Byeol(別)" inscription, it is difficult to identify its characteristics. Furthermore, as part of the annual production of porcelain was for the supply of Byeol-gi, and then for other purposes, the white porcelain came to be inscribed with dots indicating a change in ownership. In the 16th century, the royal family increased its consumption of white porcelain based on Shinyu Gongan(辛酉貢案), the government's fiscal reform measures. To guarantee a stable supply of exceptional Byeol-gi in light of Gwanyo's decline in the 1560s, the royal family benefited from the inscription of "Byeol." The white porcelain produced by Gwanyo was divided into annual offerings-those with the inscriptions "jwa(左)" and "u(右)"-and Byeol-gi, those with the inscription of "Byeol." They were managed separately from the commencement of production. Byeol-inscribed white porcelain was produced until the 1640s. During the mid-and late 1640s, Byeolbeon was temporarily suspended. Starting in the 1650s, the white clay used to produce the annual stock of white porcelain was sourced from regions other than those providing the clay for Byeol-gi production. The former used clay from Wonju(原州土) and Seosan(瑞山土), while the latter used clay from Gyeongju(慶州土) and Seoncheon(宣川土). According to the literature, the clay from Gyeongju and Seoncheon was much cleaner than that from Wonju and Seosan. Byeolbeon thus underwent a transformation, whereby production was separately managed, right from the stage of white clay mining. Ultimately, the need for the separate management of Byeol-gi through inscriptions diminished, resulting in the disappearance of Byeol-inscribed white porcelain.

• Food Science and Preservation
• /
• v.15 no.2
• /
• pp.236-242
• /
• 2008

We investigated the optimum concentration of a $NaClO_2$ solution and the amount of gaseous $Cl_2$ for production of high yield and purity of aqueous $ClO_2$ by use of a gaseous chlorine-chlorite $ClO_2$ generator. This system produced lower concentrations of chlorine dioxide and is applicable for direct-use in food processing as a cleaner and sanitizer. The concentration of $NaClO_2$ solution and the amount of gaseous $Cl_2$ was varied from 0.01-0.1% and 100-1,000 g/hr, respectively. The concentrations of chlorite, chlorate, FAC (free available chlorine), and chlorine dioxide that were produced increased with increasing concentration of $NaClO_2$ solution and with the amount of gaseous $Cl_2$. The optimum concentration of $NaClO_2$ solution and amount of gaseous $Cl_2$ were 0.1% and 900 g/hr respectively. $ClO_2$ and FAC produced at these concentrations were 882.0 ppm and 8.0 ppm, with no detection of chlorite and chlorate. The yield and purity of $ClO_2$ were 97.0% and 96.0% respectively. Immersion-cleaning experiments showed that this protocol decreased the level of CFU/g by $10^3$- to $10^4$-fold, with a similar effect on fruit.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.447-457
• /
• 2006

The purpose of this study is to document and preserve an unidentified textile purchased at a flea market. This study object is important because it is one of the very rare silk insert series from 1930s which were created for commercial use(as inclusion in cigarette packages). The investigation was conducted by researching the limited publications that discuss silk inserts, visiting many sites on the internet that offer such inserts for sale or catering to the collectors of these silk inserts, and especially visiting the collection of silk inserts, named the J.R. Burdick Collection, at the Metropolitan Museum of Art, New York. Several pieces matched the patches used in the study piece. But Buidick's description on time frame(1912-1915) did not indicate the full range of production of silk inserts. After the identification of object, the conservation treatment was carefully done using adhesives. The results of this study can be summarized as follows; 1. The silk inserts of the study object were included as promotions by some company owned by the American Tobacco Company, probably at some time between 1934 and 1939. 2. The initial stage in the conservation treatment was mechanical surface cleaning using a vacuum cleaner. After vacuuming, humidification was conducted to reduce creases in the top of the object. The damaged areas were backed with stabiltax coated with a solution of Elvace 45675 since the fiber of this object was too deteriorated. 3. Adhesive treatments using Elvace showed satisfactory results: flexibility, strength, no damaging effects on the study object, removability without damaging the object.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.40-47
• /
• 2014

Feasibility of utilizing unburned carbon residue in coal ash as a potential precursor for the production of activated carbon was assessed to seek for solution to recycle unburned carbon residue. The unburned carbon concentrate generated from the 4 stages of cleaner flotation has a grade of 87% carbon. The crystalline impurities in the concentrate included quartz and mullite. Unburned carbon had a low specific surface area of $10m^2/g$, which might be related to a high degree of coalification of domestic anthracite coal. Carbon particles were mostly porous and have a turbostratic structure. When 1g of carbon was activated with 6g of KOH powder, the highest specific surface area value of $670m^2/g$ was achieved. Low wettability of unburned carbon particles, which was resulted from high temperature combustion in a boiler, might cause poor pore formation when they were activated by KOH solution. The activated carbon produced in this study developed micropores, with an equivalent quality of general-purpose activated carbon made from coal. Hence, it is concluded that chemically treated unburned carbon can be used for water purification or an alternative to carbon black as it is.

• Clean Technology
• /
• v.9 no.3
• /
• pp.133-144
• /
• 2003

In this study, Insoluble catalyst electrode for oxide systems were manufactured, by using of them, carried out experiments on electrolytic treatment of dyeing wastewater containing persistent organic compounds, and then made a comparative study of the efficiency of treatment for environmental pollutants and whether each of them is valuable of not as an electrode for soluble electrode(Fe, Al) and insoluble electrode(SUS, R.C.E; Replaced Catalyst Electrode) which were used in the electrolytic system. Besides, it was investigated the conditions for electrolytic treatment to find the maximum efficiency of electrolytic treatment. As the result of this study, by using of insoluble catalyst electrode for oxide can solved the stability of electrode that is one of the greatest problems in order to put to practical use of electrolysis process in the treatment of the sewage and wastewater and the result runs as follows; 1. The durability of insoluble catalyst electrode(R.C.E) can be verified the most favorable when the molar ratio of $RuO_2-SnO_2-IrO_2-TiO_2$(4 compounds system) is 70/20/5/5. 2. The efficiency of treatment was obtained a more than 90% goodness for CODMn and also a good results for T-N removal in the experimental conditions of the distance of electrode 5 mm, time of electrolysis 60 minutes, permissible voltage 10V, processing capacity $0.5{\ell}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.334-342
• /
• 2016

Conventional eco-design has been implemented based only on the environmental aspects of a product. Key components of a product identified from the analysis of the environmental aspects have been the target for improvement in the conventional eco-design. The use of eco-design index (EDI) considering both the environmental and economic aspects, and utility value (UV) of a product can be envisaged as an alternative way of implementing and assessing the eco-design. The objective of this study was to propose the logic of the EDI and apply it to the components for performing printing function of the multi-function printer. The EDI was formulated by quantifying the UV, life cycle environmental impact (LCE) and life cycle cost (LCC) of the components of a product, here components of the printer. Of the eight components investigated, roller was identified as the best performing consumable in both the environmental and economic aspects. However, its UV was the lowest among the eight. The EDI of the roller was mere $4^{th}$ in ranking out of the eight. Transfer belt ranked $8^{th}$ and $5^{th}$ in the environmental and economic aspects, respectively, while $2^{nd}$ in the utility value with its EDI ranked $3^{rd}$. This indicates that not only the environmental aspects but also economic and utility value aspects should be considered when identifying the key components for improvement in the eco-design.