• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.247-255
• /
• 2014

$La_{0.8}Sr_{0.2}CuO_3$ powder with the perovskite structure was prepared as electrode catalyst using citrate method. Porous electrode was made with as-prepared catalyst, carbon as supporter and polytetrafluoroethylene (PTFE) as hydrophobic binder. As results of potentiostatic electrolysis with potential of -1.5~-2.5 V vs. Ag/AgCl in 0.1, 0.5 and 1.0 M KOH at 5 and $10^{\circ}C$ on the porous electrode, liquid products were methanol, ethanol, 2-propanol and 1, 2-butanol regardless reaction temperature, while gas products were methane, ethane and ethylene at $5^{\circ}C$, and methane, ethane and propane at $10^{\circ}C$ respectively. Optimal potentials for $CO_2$ reduction in the view of over all faradic efficiency were high values (-2.0 and -2.2 V) for gas products whereas low potential (-1.5 V) for liquid products regardless of concentration and temperature.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2003

[ $LiNi_{1-x}Co_xO_2\;(x=0.0\~1.0)$ ] powders were synthesized by citrate method, and their crystal structures and electrochemical performance as the cathode material in Li secondary batteries were analyzed. X-ray diffraction analysis revealed that all the samples carry a single phase regardless of the Co substitution. The results of Rietveld refinement suggested that the crystal structure of solid solutions varies according to the Co substitution. When the Co substitution is low $(x=0.3\~0.5)$, the solid solutions carry a cubic-like structure with a relatively small value in the ratio of lattice parameters (c/a). The solid solutions made with a higher Co substitution (x=0.7), however, exhibit a layered structure with a higher c/a ratio. This difference was also observed in the electrochemical voltage spectroscopy (EVS) profiles, whereby the Co component in scarcely substituted materials shows a charging reaction at $3.7V\;(vs.\;Li/Li^+)$, but in the heavily substituted ones at 3.92V.

• Macromolecular Research
• /
• v.11 no.4
• /
• pp.207-223
• /
• 2003

For last five years, we are developing the novel local drug delivery devices using biodegradable polymers, especially polylactide (PLA) and poly(D,L-lactide-co-glycolide) (PLGA) due to its relatively good biocompatibility, easily controlled biodegradability, good processability and only FDA approved synthetic degradable polymers. The relationship between various kinds of drug [water soluble small molecule drugs: gentamicin sulfate (GS), fentanyl citrate (FC), BCNU, azidothymidine (AZT), pamidronate (ADP), $1,25(OH)_2$ vitamin $D_3$, water insoluble small molecule drugs: fentanyl, ipriflavone (IP) and nifedipine, and water soluble large peptide molecule drug: nerve growth factor (NGF), and Japanese encephalitis virus (JEV)], different types of geometrical devices [microspheres (MSs), microcapsule, nanoparticle, wafers, pellet, beads, multiple-layered beads, implants, fiber, scaffolds, and films], and pharmacological activity are proposed and discussed for the application of pharmaceutics and tissue engineering. Also, local drug delivery devices proposed in this work are introduced in view of preparation method, drug release behavior, biocompatibility, pharmacological effect, and animal studies. In conclusion, we can control the drug release profiles varying with the preparation, formulation and geometrical parameters. Moreover, any types of drug were successfully applicable to achieve linear sustained release from short period ($1{\sim}3$ days) to long period (over 2 months). It is very important to design a suitable formulation for the wanting period of bioactive molecules loaded in biodegradable polymers for the local delivery of drug. The drug release is affected by many factors such as hydrophilicity of drug, electric charge of drug, drug loading amount, polymer molecular weight, the monomer composition, the size of implants, the applied fabrication techniques, and so on. It is well known that the commercialization of new drug needs a lot of cost of money (average: over 10 million US dollar per one drug) and time (average: above 9 years) whereas the development of DDS and high effective generic drug might be need relatively low investment with a short time period. Also, one core technology of DDS can be applicable to many drugs for the market needs. From these reasons, the DDS research on potent generic drugs might be suitable for less risk and high return.

• Journal of the Korean institute of surface engineering
• /
• v.3 no.1
• /
• pp.7-12
• /
• 1970

Only mannitol or glycerine is generally used for the determination of boric acid in a nickel plating solution in order to make its acidic property so strong that it can be titrated with NaOH. However, these solutions give very amgiguous color change of indicator due to the precipitation of nickel salts . Therefore, only experienced dchemistsorwell trained workimen can accurately confirm the actual end point of the titratiion. For eliminating such interference of nickel salts and easily confirming the end point by any persons , the author attempted to find out a solution which produces no precipitates during the titration in these experiments, and also he tried to funish the reason for ambiguousness in titration. The following results were obtained after many experiments. (1) In any titrations which produce nickel salts such nI(oh)$_2$, the salt is formed umption very approximate to the end point, which shows some error by the consumption of titrant(NaOH) . Then, the pink color of phenolphthalein is absorbed by Ni(OH)$_2$ and the pH jumping at the end pint is also diminished to as little as less than 15% of the total phenophthalein ph range. (2) Known methods by complex salts of citrate,w hich do not produce precipitates of Ni(OH)$_2$, are also not very satisfactory, because, the pH jumping at the end point is only about 35% and the color change of phenolphthalein is form blue-green to purple-blue. (3) New method by complex salts of oxalate were attempted in these experiments. They also did not produce precipitates of Ni(OH)$_2$ and were very satisfactory in color change at the end of point was about 65% and the color change was from blue-green to purpled. In this methods, analytica cost was minimized by the use of less amounts of cheaper chemicals than the conventional citrates complex methods. The mixture of chemicals used was composed methods. The mixture of chemical used was composed of 37g/ι of sodium oxalate(Na$_2$C$_2$O$_4$$.$5H$_2$O), 2g/ι of phenolphthalein, and 400ml /ι of glycerin. The accuracy of analysis was within the error of 0.5%. (4) The procedure of analysis was as follows. One ml of nickel plating solution was taken out and to it were added 20ml of water and 20 ml of the above mixture for the indicator. The solution was titrated with 0.1N NaOH. The quantity of boric acid was calculated by the following equation. Boric acid (g/ι) = 6.184${\times}$F${\times}$ml .

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.3
• /
• pp.389-398
• /
• 1999

Objective: This study was designed to evaluate the effects of endogenous LH surge, GnRH agonist (GnRH-a) or human chorionic gonadotropin (hCG) as ovulation trigger on pregnancy rate by intrauterine insemination (IUI). Method: Patients received daily 100 mg of clomiphene citrate (CC) for 5 days starting on the third day of the menstrual cycle followed by human menopausal gonadotropin (hMG) for ovulation induction. Follicles larger than >16 mm in diameter were present in the ovary, frequent LH tests in urine were introduced to detect an endogenous LH surge. Final follicular maturation and ovulation were induced by GnRH-a 0.1 mg (s.c.) or hCG $5,000{\sim}10,000$ IU (i.m.) administration except natural ovulation. Pregnancy was classified as clinical if a gestational sac or fetal cardiac activity was seen on ultrasound. Results: There were no differences in age, duration of infertility and follicle size, but more ampules of hMG were used in GnRH-a group compared to hCG 10,000 IU treated group (p<0.05). Lower level of estradiol ($E_2$) on the day of hCG or GnRH-a injection was observed in hCG 10,000 IU group than other treatment groups (p<0.01). The overall clinical pregnancy rate was 19.8% per cycle (32/162) and 22.2% per patient (32/144). Pregnancy rate was higher in natural-endogenous LH surge group (37.5%, 9/24) than GnRH-a (18.8%) or hCG treated group (20.9% & 13.9%), but this difference was not statistically significant. No patient developed ovarian hyperstimulation. Abortion rate was 22.2% (2/9) in hCG 5,000 IU group. Delivery or ongoing pregnancy rate was 37.5% (9/24), 18.8% (3/16), 16.3% (7/43) and 13.9% (11/79) in endogenous LH surge, GnRH-a, hCG 5,000 IU and hCG 10,000 IU treatment groups, respectively. Conclusion: These results support the concept that use of natural-endogenous LH surge in stimulated cycles may be more effective to obtain pregnancies by IUI than GnRH-a or hCG administration.

• Microbiology and Biotechnology Letters
• /
• v.31 no.4
• /
• pp.368-376
• /
• 2003

Cyclodextrin glucanotransferase (CGTase) from Paenibacillus sp. JB-13 was immobilized on various carriers by several immobilization methods such as ionic binding, covalent linkage and ultrafiltration to improve the process performance. The ultrafiltration and covalent linkage with CNBr-activated sepharose 4B were found as the best method for immobilization of CGTase. The ability of CGTase immobilization onto CNBr-activated sepharose 4B was as high as 18,000 units/g resin when the conditions was as follows: contact time 9 hrs at $37^{\circ}C$, pH 6.0, 100 nm and enzyme loading 24,000 units/g resin. The optimum conditions for production of 2-O-$\alpha$-D-Glucopyranosyl L-Ascorbic acid by immobilized CGTase turned out to be: pH 5.0, temperature $37^{\circ}C$, 20% substrate solution containing 8% (w/v) of soluble starch and 12% (w/v) of L-ascorbic acid sodium salt, 100 rpm, far 25 hrs and with 800 units of immobilized CGTase/ml substrate solution. Moreover the CGTase activity could be stably maintained for 8 times of repetitive reactions after removing products by ultrafiltration through YM 10 membrane.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.227-235
• /
• 2021

In this study, we have prepared pure planar-type ZnO and calamine powder containing both ZnO and Fe₂O₃ components as a raw material for cosmetics with UV and blue band blocking functions. The planar-type ZnO ceramic powder having a high aspect ratio in the range of 20:1 to 50:1 was synthesized by precipitation method in a zinc acetate and sodium citrate mixed solution with the electrolyte obtained by power generation with a zinc-air battery. The content of Fe₂O₃ in the artificial calamine ceramic powder could be increased by increasing the amount of iron chloride solution added, and in this case, some of the blue region of visible light and ultraviolet light were remarkably absorbed. When potassium acetate was added, the decomposition of the Zn(OH)₄^2- anion in the solution was promoted to facilitate the growth of ZnO crystal in the form of a barrier wall in the vertical direction on the (0001) plane, which could increase UV absorption by providing more opportunities. By controlling the amount of iron chloride solution and potassium acetate solution added, the composition and shape of the thin film plate-shaped artificial calamine ceramic powder can be optimized, and when applied to cosmetic formulations, the light transmittance of the blue region can be greatly reduced.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.355-360
• /
• 2010

Vibrio parahaemolyticus (V. parahaemolyticus), which is commonly found in raw seafood, causes gastroenteritis in humans. Rapid and effective methods have been developed as culture methods require up to 5-7 days. In this study, real-time PCR was compared with the standard culture method for detecting V. parahaemolyticus in seafood and radish sprout samples. Five hundred grams of the samples were artificially contaminated with V. parahaemolyticus then divided into 20 samples. The samples were incubated in alkaline peptone water and then streaked onto thiosulfate-citrate-bile saltssucrose agar. Biochemical tests for suspicious colonies were performed using the API 20NE strip. In parallel, real-time PCR was performed targeting the toxR gene using the enrichment broth. The real-time PCR was sensitive in discriminating V. parahaemolyticus from other foodborne pathogens. The detection limit of the real-time PCR was $10^3\;CFU/mL$ in phosphate-buffered saline. Although the real-time PCR detected more positive samples (76 out of 180, 42%) than the culture method (66 out of 180, 37%), there was no significant statistical difference (p>0.05) between the two methods. In conclusion, real-time PCR assays could be an alternative to the standard culture method for detecting V. parahaemolyticus in seafood and radish sprouts, which has many advantages in terms of detection time, labor, and sensitivity.

• Journal of Food Hygiene and Safety
• /
• v.30 no.3
• /
• pp.281-288
• /
• 2015

Vibrio is a genus of Gram-negative, curved, halophilic, and non-spore-forming bacteria. Some of the Vibrio species, such as V. cholerae and V. parahaemolyticus, often contaminate seafood products and occasionally cause human diseases when the seafood products are ingested. A total of 24 Vibrio strains were isolated from shrimp samples on Thiosulphate citrate bile salt sucrose (TCBS) media in this study. All of the 24 isolates were confirmed to belong to the genus Vibrio by using 16S rRNA gene sequence analyses. Vitek 2 system and species-specific polymerase chain reaction (PCR) methods were used to further identify a total of 29 Vibrio strains at the species level, including the 24 shrimp Vibrio isolates and five Vibrio reference strains. The specificities of the two methods to identify Vibrio strains at the species level were compared in this study. The species-specific PCR method was designed to detect five different Vibrio species, such as Vibrio cholerae, Vibrio parahaemolyticus, Vibrio vulnificus, Vibrio alginolyticus, and Vibrio mimicus. From the 24 Vibrio shrimp isolates, the Vitek 2 system method could identify 15 (62.5%) strains as Vibrio species and 7 (29.2%) strains as non-Vibrio species, but could not identify the rest 2 (8.3%) strains. But species-specific PCR method could identify 16 (66.7%) strains as Vibrio species and could not identify the rest 8 (33.3%) strains. Among the 24 Vibrio shrimp strains, these two methods could unanimously identify 7 (7/24, 29.2%) strains (2 V. parahaemolyticus, 4 V. alginolyticus, and 1 V. mimicus). Considering that such different identification results were obtained using the two different methods in this study, identification method for Vibrio species must be carefully chosen.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.201-210
• /
• 2017

BACKGROUND: The current study was to monitor of 9 veterinary antibiotics (ceftiofur, clopidol, florfenicol, sulfamethazine, sulfamethoxazole, sulfathiazole, tetracycline, tiamulin, and tylosin) in manure using liquid chromatography-tandem mass spectrometry (LC-MS/MS) in positive and negative electrospray ionization mode. METHODS AND RESULTS: Sample preparation was carried out using Mcllvaine buffer and citrate salts to adjust the pH of the sample followed by purification with dispersive solid phase extraction (d-SPE). Separation of analytes during LC-MS/MS analysis was conducted using an Eclipse Plus $C_{18}$ column and the mobile phase was in gradient mode with, 0.1% formic acid and 5 mM ammonium formate in methanol (A) and 0.1% formic acid and 5 mM ammonium formate in distilled water (B). The linearity of the matrix-matched calibrations of all tested antibiotics was good, with $R^2$ determination coefficients ${\geq}0.9920$. The limit of detection (LOD) and quantifications (LOQ) were $0.1-67.0{\mu}g/kg$ and $0.4-200.0{\mu}g/kg$, respectively. Analysis of 13 solid and liquid manure samples taken from the Republic of Korea revealed concentrations less than $0.7{\mu}g/kg$ for tiamulin, $1497.6{\mu}g/kg$ for sulfamethazine. CONCLUSION: To monitor 9 veterinary antibiotics from manure samples in 13 provincial areas throughout the Republic of Korea, an analytical method was developed. The developed method was fully validated and successfully applied for monitoring various veterinary antibiotics in manure samples.