• Bulletin of the Society of Naval Architects of Korea
• /
• v.8 no.1
• /
• pp.53-66
• /
• 1971

The effect of reinforced circular hole in a flat plate under general biaxial loading conditions is considered. The reinforcement is achieved by attaching a circular ring of uniform rectangular cross section along the boundary of the hole. This investigation includes a theoretical solution and an experimental conformation. In the theoretical analysis, Gurney's method is used to obtain a solution for the stress distribution and the solution is expressed in a general form, so that it can be applicable to the case of general biaxial loading and general values of Poisson's ratios. In the experimental work a systematic series of photoelastic models, as shown in Fig.5 and Table 1, were analyzed on polariscope. The experimental results were in good agreement with the theoretical ones, as shown in Fig.8 and 9. The conclusions derived are as follows: 1) The theoretical results, given in Eq. $(1){\sim}(5)$, are sufficient in accuracy for the engineering design purpose. 2) The stress concentration factor decreases as the ratio n increases, but not significant beyond n=3. 3) The stress concentration factor increase as the ratio m increases, but not significant below m=0.7.

• Earthquakes and Structures
• /
• v.8 no.3
• /
• pp.699-712
• /
• 2015

Bracing structures with off-centre bracing system is one of the new resistant systems that frequently used in the frame with pin connections. High ductility, high-energy dissipation and decrease of base shear are advantages of this bracing system. However, beside these advantages, reconstruction and hard repair of off-centre bracing system cause inappropriate performance in the earthquake. Therefore, in this paper, the goal is investigating the behavior of this type of bracing system with ductile element (circular dissipater), in order to providing replacement of damaged member without needing repair or reconstruction of the general system. To achieve this purpose, some numerical studies have been performed using ANSYS software, a frame with off-centre bracing system and optimum eccentricity (OBS-C-O) and another frame with the same identifications without ductile element (OBS) has been created. In order to investigate precisely on the optimum placement of circular elements under monotonic load again three steal frames were modeled. Furthermore, the behavior of this general system investigated for the first time, linear and nonlinear behavior of these two steel frames compared to each other, to achieve the benefit of using the circular element in an off-centre bracing system. Eventually, the analytical results revealed that the performance of steel ring at the end of off-centre braces system illustrating as a first defensive line and buckling fuse in the off-centre bracing system.

• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.359-362
• /
• 2015

A Korean water deer was rescued after being hit by a motor vehicle. Clinical and radiographic examination revealed a grade III open fracture of the right metacarpus with severe soft tissue injury. The water deer underwent closed reduction of the fracture, which was stabilized by the application of the Ilizarov method of 4-ring circular external skeletal fixation (CESF) as a minimally invasive technique. The water deer was successfully released into the wild. CESF was advantageous for the stabilization of open comminuted fracture and the management of a severely contaminated wound in a Korean water deer. CESF can be used successfully in wild deer with good tolerance and minimal complications.

• ETRI Journal
• /
• v.46 no.3
• /
• pp.404-412
• /
• 2024

We propose a method for increasing the bandwidth of a substrate-integrated-waveguide (SIW) cavity-backed antenna with taper-based micro-strip SIW transition feeding. For radio transmission, a circular slot is etched on top of the SIW cavity. For optimal antenna design, the slot is etched slightly away from the cavity center to generate circularly polarized waves. Simulations show a wide axial ratio bandwidth of 7.860% between 11.02 GHz and 11.806 GHz. Experimental results confirm a similar wide axial ratio bandwidth of 4.9% between 10.8 GHz and 11.35 GHz. An SIW feed from an inductive window excites the radiating circular slot, resulting in a simulated wide impedance range of 1.548 GHz (10.338 GHz-11.886 GHz) and bandwidth of 13.93%. Experimental results show a wide impedance of 2.08 GHz (10.2 GHz-12.08 GHz) and bandwidth of 18.84%. The SIW cavity-backed antenna creates a unidirectional pattern, leading to gains of 6.61 dBi and 7.594 dBi in simulations and experiments, respectively. The proposed antenna was fabricated on a Rogers RT/Duroid 5880 substrate, and the reflection coefficient, radiation patterns, and gains were tested and compared using a computer simulator. The developed broadband antenna seems suitable for X-band applications.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.297-301
• /
• 2002

본 논문에서는 광대역 원형 링슬롯 안테나의 광대역 특성이 일어나는 메커니즘 연구를 통해 새로운 광대역 안테나 설계 및 분석에 도움을 줄 수 있도록 하였다 먼저 기존의 광대역 안테나 및 공진회로 개념을 이용하여 새로운 광대역 안테나의 이론적인 분석을 하도록 하였으며, 기존의 광대역 안테나를 설계하는 방법(자기유사구조, 자기상보구조, 길이보다 각을 강조한 구조, 두꺼운 도체를 사용하는 구조 등)외에 최근들어 많이 연구되고 있는 안테나의 Q값을 줄이는 방법에 대해 분석 및 정리하고 본 원형 링슬롯 안테나의 복사기와 급전선사이에서 광대역이 일어나는 메커니즘에 대해서 연구하였다.

• Journal of the Korean Society of Safety
• /
• v.10 no.4
• /
• pp.68-74
• /
• 1995

This paper analyzes the behaviors of the membrane under drop impact loadings using the acoustic emission technique. The analysis is useful for evaluating the strength of the membrane as well as for studying its damping characterisics due to the corrugation and the ring knot. The membrane for LNG storage tank is basically composed linear and circular elements. Two membrane specimens have approximately same drop impact mass and same drop speed. Locan 320 system with piezoelectric sensor is used in the experimental measurement. Experimental results for the membranes indicated that AE siganls having higher energies were generated with increasing drop impact loadings. It was confirmed that the ring knot. membrane has high absorption of drop impact loadings in comparison with the flat membrane. These results are very important to reliable design and to improve the safey of the membrane components.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.60.2-60.2
• /
• 2014

The dust cloud around ${\lambda}$-Orionis is seen to be circular symmetric with the large angular extent (${\sim}8^{\circ}$). However, whether the three dimensional structure of the cloud is shell or torus ring is not yet fully resolved. We studied the structure of the dust cloud using a three-dimensional Monte-Carlo simulation code, MoCafe (Monte Carlo radiative transfer). The dust density structure of the cloud was inferred based on the star-count method. We assumed that the cloud is a spherical shell or a torus ring and calculated the radial profiles of scattered light originating from a central OB association. Comparison of the results with the S2/68 ultraviolet observations indicates that the cloud is a spherical shell. We also compared the Av map around ${\lambda}$-Orionis with the optical depth obtained based on the star-count.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.553-557
• /
• 2000

Nonlinear Vibrations of a flexible circular ring is studied in this paper. Based upon the von Karman strain theory, the nonlinear governing equations are derived, in which the in-plane bending and extension displacements as well as the out-of-plane bending displacement are fully coupled. After discretizing the governing equations by the Galerkin approximation method, we obtain the linearlized equation by using the pertubation method. The analysis results from the linearlized equations show that the in-plane displacement has effects on the natural frequencies of the out-of-plane displacement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.75-80
• /
• 2003

This paper presents novel compact circularly polarized(CP) operation of a annular ring slot antenna with a 45$^{\circ}$truncated in the patch and a cross-slot of unequal slot lengths. A simple configuration based on a cross-slot of unequal slot lengths on the annular ring patch is adopted to realize a small-size element antenna and used a proximity coupled feed method. Experimental results show that much wider impedance bandwidth of 7.74 % and axial ratio bandwidth of 1.9 % in GPS band(1.5 GHz).

• Journal of the Korean Geotechnical Society
• /
• v.20 no.6
• /
• pp.5-10
• /
• 2004

The earth pressure coefficient at rest for clayey soils in the one-dimensional state, $K_0$ obtained from the triaxial test is not correct in principle because the seepage flow is radial and the displacement of soil elements is three-dimensional. Measurements of the earth pressure and the pore water pressure during one-dimension consolidation in the consolidometer ring are presented. The earth pressure and pore water pressure are measured directly by a circular part of the consolidometer ring of a floating type at its mid height. A plastic clay showed $K_0$=0.5 irrespective of pressure in the consolidometer ring.