• Journal of Korean Society of Transportation
• /
• v.12 no.4
• /
• pp.35-52
• /
• 1994

In order to operate the computerized traffic signal system, it requires the detectors which ensure the exact detections of actual traffic data (e.g., traffic volume, occupancy and velocity of vehicles). The octagonal detectors are used currently in Korea. However, the maintenance of the detectors has many problems with the road repairs and the constructions on the pavement, and failure due to the disconnection of the wires. Serious delay due to the long installation time of loops also causes the traffic disturbances. The low sensitivities and splash-over effect can sometimes create error data after installation of the octagonal loops. The mai purpose of this study is to evaluate the feasibility of domestic use of the round (circular) inductive loops which developed recently in U.S.A. It was found that the round loops are comparable to the existing octagonal loops. In addition, the use of the high quality of materials in the round loop system can reduce the current problems and weakpoints of the octagonal loops. The installation cost of the round loop was found out as economic as the octagonal loop. The installation time of the round loop system can be reduced with the specially equipped loop truck, and wide/deep slots without sharp corners can extend the durability without serious stress of loop head wires. In conclusion, the round loop is superior to the octagonal type in overall points. It is recommended that the localization of the materials and equipments of round loop system is required to carry out the extensive local installations. Also, several contractors to meet the nationwide demand should be arranged to gurantee the proper maintenance and operation of the systems.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.974-977
• /
• 2012

In this letter, a small-sized ultra-high frequency (UHF) RFID tag antenna for a medical sample tube is proposed. The RFID tag antenna is designed and fabricated based on the circular loop antenna used in the UHF band (Korea standard, 917 MHz to 923.5 MHz). The tag antenna size is reduced using a circular meander stub. The antenna has a physical size of 8 mm, which is about ${\lambda}$/40 in electrical length. The proposed tag antenna is molded into a medical sample and multitag identification is performed.

• Journal of computational fluids engineering
• /
• v.4 no.2
• /
• pp.31-38
• /
• 1999

Numerical analysis is conducted on the deformation of free surface of magnetic fluid. Steady magnetic fields are induced by a circular current loop. Governing equations of magnetic fields are solved by using the concept of vector potential. The free surface of magnetic fluid is formed by the balance of surface force, gravity, pressure difference, magnetic normal pressure and magnetic body force. The deformations of free surface of magnetic fluid are qualitatively clarified. And, the patterns of steady non-uniform magnetic fields induced by a circular current loop are quantitatively presented. The shape of free surface attained by the polar fluid approach is rougher and higher than that attained by the quasi-steady approach.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.73-74
• /
• 2016

In this paper, a design method for a wideband square loop antenna for Digital TV applications is studied. The proposed loop antenna is a square loop antenna combined with circular sectors to connect with central feed points. The input reflection coefficient and gain characteristics of the proposed antenna are analyzed to match with the 75 ohm input impedance for DTV applications. The optimized antenna is designed on FR4 substrate, and it operates in the frequency band of 470-1,300 MHz for a VSWR < 2, which assures the operation in the DTV band(470-806 MHz).

• The Korean Journal of Pain
• /
• v.10 no.1
• /
• pp.64-68
• /
• 1997

Background : Patients mover more as their post operative pain decrease. With the increase in movement there will be a tendency for the epidural catheter to migrate out of its original position. We studied 2 methods of fixation of the epidural catheter and the changes in position as related to patient movement. Methods : Patients were divided into two groups. Patients in Group A had their epidural catheter formed with a circular loop at the (skin) exit site then directed over the right shoulder. Group B had the epidural catheter flxed with Fixomull on the exit site without forming a circular loop. At the end of the operation, 3 mg of epidural morphine was injected via indwelling epidural catheter for postoperative pain control. Epidural catheter depth was measured 24 hours later. Results : The overall rate of migration of epidural catheter was 61.9%. In Group A, number of patients whose catheter migrated over 0.5 cm was 23(69.9%) with 14 inward migration and 9 outward migration. Group B had 16(53%) patients catheters migrate over 0.5 cm, with 2 patients having inward migration and 14 outward migration. Conclusions : Although the rates of migration of epidural catheter were similar for both groups, the number of inner migration of catheter, which could result serious complications, was significantly lower in Group B than Group A. Based on our results we recommend the epidural catheter be fixed without a circular loop.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.228-231
• /
• 1987

Microprocessor-based software DDA interpolator is developed and applied to two axis contouring control of X-Y table. Developed assembly program is composed of feedrate, linear and circular DDA interpolation routines. Reference-pulse type of open-loop stepping motor control system in which the micro-computer produces a sequence of reference pulses for each axis of motion is adopted. To test performance of the developed program, X-Y table drive system based on stepping motor and shaft encoder is designed. Contouring error of the system in linear and circular path is within .+-.0.2 mm.

• ETRI Journal
• /
• v.31 no.1
• /
• pp.74-76
• /
• 2009

A new feeding method for the circular polarization (CP) dielectric resonator antenna (DRA) is proposed in this letter. Two orthogonal modes (${TE^x}_{{\delta}11}$, ${TE^y}_{1{\delta}1$) of the rectangular DRA are excited by a $90^{\circ}$ phase difference of the differential and common modes currents of the proposed feeding structure. To demonstrate the good CP performance of the proposed method, a right-hand CP DRA for a global positioning system was designed. The impedance bandwidth of the proposed antenna for $S_{11}$ < -10 dB and 3 dB axial ratio bandwidth are about 5.4% and 1.95% at 1.57 GHz, respectively.

• Bulletin of the Korean Space Science Society
• /
• 1995.04a
• /
• pp.21-21
• /
• 1995

The structures of 17GHz microwave burst for bipolar sunspots have investigated. which included the effects of the projected shapes of radio sources as they traverse across the solar disk using a magnetic loop employing a model of solenoid coils. An ensemble of high-energy electrons confined in the loop be assumed. The projected brightnesls distributions of gyrosynchrotron emission in x- and o-modes are computed and converted into total intensity and circular polarization difference at 17GHz for various heliocentric distances using numerical integration of the transfer equation along the line of sight. The results of computations at 17GHz for optical thin case will be presented. and the effects of the orientation of the loop will be discussed in detail, as well as the effect of size, position, Structure, and polarization of the emission. Also the results of the various physical P8lrameters such as the strength of magnetic field. high and low energy cut-off of accelerated electrons. spectral index and density of electrons will be preslmted. After comparing the results of model calculation with observations. we found that the observations can be well explained in terms of a loop model and its projection effect.effect.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.6
• /
• pp.1039-1057
• /
• 2022

The fashion system has been criticized for relying on a linear economy to reduce short-term costs and increase profits. Meanwhile, the circular economy strives to expand the value chain through a closed loop for companies, society, and the environment by separating consumption from resources. This study aims to elucidate the strategic characteristics of the technological measures that fashion companies and brands are trying to innovate into a sustainable fashion system on the basis of the circular economy concept. Thus, we conducted case studies by dividing the value chain of the fashion system into design, production, and consumption to identify the technological development of the circular fashion system from a technologization perspective that incorporates technological values. First, design appeared to strengthen emotional durability, design and process with circulation in mind, and fashion product digitalization. Second, production manifested itself as material development for the new fiber economy, improvement of non-environmental processes, and customization of demand-driven, responsive production. Third, consumption was the spread of the environmental consumption culture through the sharing economy platform, the realization of a virtual wearing experience to prevent rapid disposal, and the provision of information on sustainable consumption.

• BMB Reports
• /
• v.33 no.5
• /
• pp.379-384
• /
• 2000

The native conformation of serpins (serine protease inhibitors) is strained. Upon cleavage of the reactive center loop of serpins by a protease, the amino terminal portion of the cleaved loop is inserted into the central ${\beta}-sheet$, A sheet, as the fourth strand, with the concomitant release of the native strain. We questioned the role of protease in this conformational switch from the strained native form into a stable relaxed state. Chemical cleavage of the reactive center loop of ${\alpha}_1-antitrypsin$, a prototype serpin, using hydroxylamine dramatically increased the stability of the serpin. A circular dichroism spectrum and peptide binding study suggests that the amino terminal portion of the reactive center loop is inserted into the A sheet in the chemically-cleaved ${\alpha}_1-antitrypsin$, as in the enzymatically-cleaved molecule. These results indicate that the structural transformation of a serpin molecule does not require interaction with a protease. The results suggest that the serpin conformational switch that occurred during the complex formation with a target protease is induced by the cleavage of the reactive center loop per se.