• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.429-434
• /
• 2002

The differential equations governing in-plane free vibrations of stepped circular arcs, including the effects of axial deformation, rotatory inertia and shear deformation, are derived and solved numerically to obtain frequencies and mode shapes. Numerical results are calculated for the clamped-clamped symmetric and unsymmetric circular arcs with thickness varying in a discontinuous fashion. The lowest four natural frequencies and mode shapes are presented over a range of non-dimensional system parameters: the subtended angle, the slenderness ratio, the section ratio and the ratio of discontinuous section.

• 한국CDE학회논문집
• /
• 제5권2호
• /
• pp.168-174
• /
• 2000

A biarc is a curve connecting two circular arcs with the constraints of tangent continuity so that it can represent the free form currie approximately connecting several biarcs with the tangent continuity. Since a biarc consists of circular arcs, the offset curve of the curve represented by biarcs can be easily obtained. Besides. if the tool path is represented by biarcs, the efficiency of machining is improved and the amount of data is decreased. When approximating a curve with biarcs, the location of the point where two circular arcs meet each other plays an important part in determining the shape of a biarc. In this thesis, the optimum point where two circular arcs meet is calculated using the tangent information of the curve to approximate so that it takes less calculation time to approximate due to the decrease of the number of iterations.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권9호
• /
• pp.868-877
• /
• 2005

호는 패턴인식에 있어서 매우 중요한 특징으로 간주된다. 이 논문에서는 기하학적 분석을 이용하여 2차원 곡선으로부터 호를 추출하고 그 호의 중심과 반지름을 계산하는 방법을 제시한다. 제안된 방법에 의해 추출된 호는 원래의 곡선으로부터 거리오차가 항상 허용치 이내의 값을 만족한다. 제안된 방법이 부드럽게 연결된 2차원 곡선이나 잡음이 심한 2차원 곡선 내에 있는 호의 추출에도 유용함을 실험으로 확인하였다.

• 전자공학회논문지B
• /
• 제31B권6호
• /
• pp.91-103
• /
• 1994

As CAD systems are introduced in the filed of engineering design, the necessities for automatic drawing input are increased . In this paper, we propose a method for realizing automatic drawing input by separation of text regions and graphic regions, extraction of line vectors from graphic regions, and recognition of circular arcs and circles from line vectors. Sizes of isolated regions, on a drawing are used for separating text regions and graphic regions. Thinning and maximum allowable error method are used to extract line vectors. And geometric structures of line vectors are analyzed to recognize circular arcs and circles. By processing text regions and graphic regions separately, 30~40% of vector information can be reduced. Recognition of circular arcs and circles can increase the utilization of automatic drawing input function.

• Tribology and Lubricants
• /
• 제30권4호
• /
• pp.212-217
• /
• 2014

A counter gear transmits the rotation angle, so the angular velocity ratio of the gear does not necessarily need to be constant in the meshing process. As a pinion has a small number of teeth when combined with an internal gear for counters, tooth interference can occur with the use of an involute curve. This paper introduces circular arcs that represent a tooth profile and fillet for the profile design of a pinion through the combination of arcs with lines. The straight line of a rack tooth represents the profile of a mating internal gear. Thus, the circular arc and line maintain contact during the rotation of the counter gear. This paper presents an analysis of the meshing of the circular arc tooth and rack tooth along with the properties of the counter gear, such as the change in rotational velocity and amount of backlash. The contact ratio of the counter gear is 1 because the tooth contact occurs between circular arcs and line. The initial position of tooth contact, which denotes the simultaneous contact of two teeth, is found. As the rotation of the pinion, only one tooth keeps the contact situation. This meshing property is analyzed by the geometrical constraints of the tooth profile in contact and the results are presented as graphical diagrams in which tooth-arc movements are superimposed.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.840-843
• /
• 2016

원호는 산업 환경에서 객체의 검출 및 인식에 매우 유용한 특성이다. 본 논문에서는 새로운 원호 검색 방법을 제안한다. 원호 검출은 중점과 원호의 반지름, 두 개의 호 끝점이 필요하다. 제안하는 새로운 검출 방법은 호를 따라 지정한 세 점을 이용하여 가장 좋은 부분을 결정한다. 최소자승법을 적용하여 원호의 최적점과 중점 그리고 반지름을 얻는다. 남은 모서리 점들의 거리와 반지름은 원호의 두 끝점을 찾는데 이용된다.

• Tribology and Lubricants
• /
• 제22권2호
• /
• pp.79-86
• /
• 2006

As the gerotor set with ideal profile meshes too tight, the reduction in the size of the rotor is generally adopted for a smooth operation. In this paper, a method of the profile modification for providing clearances was proposed. The meshing properties of the gerotor were analyzed and the non-boundary section of the inner rotor was identified, which denoted that the adjacent chambers were in the same pressure state. Clearances were imposed on the non-boundary section of the inner rotor, and then the profile of that section was modified as a composite curve of arcs. The other sections of the inner rotor were also interpolated as arcs. Thus, the whole profile of the inner rotor was designed as a composite curve of arcs.

• Journal of Mechanical Science and Technology
• /
• 제16권1호
• /
• pp.46-59
• /
• 2002

The main purpose of this study is to investigate the variation of tool electrode edge wear and machining performance outputs, namely, the machining rate (workpiece removal rate), tool wear rate and the relative wear, with the varying machining parameters (pulse time, discharge current and dielectric flushing pressure) in EDM die sinking. The edge wear profiles obtained are modeled by using the circular arcs, exponential and poller functions. The variation of radii of the circular arcs with machining parameters is given. It is observed that the exponential function models the edge wear profiles of the electrodes, very accurately. The variation of exponential model parameters with machining parameters is presented.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.848-860
• /
• 1994

Generally, to get the minimum distance between two arbitrary shapes that are composed of circular arcs and lines, we must calculate distances for all the possible pairs of the components from two given shapes. In this paper, we propose an efficient method for the minimum distance problem between two shapes by using their structural features after extracting the reduced component lists which are essential to calculate the minimum distance considering the relationship of shape location. Even though the reduced component lists may contain all the components of the shapes in the worst case, in the average we can reduce the required computation much by using the reduced component lists. This method may be efectively applied to calculating the minimum distance between two shapes which are generated by the CAD tool, like in the nesting system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.252-253
• /
• 2005

The dielectric relaxation properties of $^{60}Co$ gamma-ray irradiated Poly(vinylidene fluoride) (PVDF) containing various antioxidants have been investigated for radiation degradation. Cole-Cole's circular arcs were induced from the results of temperature and frequency dependency of dielectric properties with radiation dose. The magnitude of polarization of PVDF was decreased by adding antioxidants. The values of dielectric relaxation intensity calculated by using the Cole-Cole's circular arcs showed a certain tendency for radiation degradation.