• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1142-1147
• /
• 2022

The edges of image should be detected first so that the objects in the image can be identified. An hardware-implemented edge detection algorithm outperforms its software version. Sobel operation is the most suitable algorithm for an hardware implementation of edge detection. And lots of works have been done to perform Sobel operations efficiently on FPGA-based hardware. This work proposes how to implement fast edge detection circuit on FPGA, which is based on the conventional circuit for edge detection using Sobel operator. The newly proposed circuit is suitable for processing images when the images are stored in memory devices and outperforms the conventional one with little additional FPGA resources. Both the conventional circuit and the proposed circuit were implemented on an FPGA. And the result showed that the proposed circuit almost doubles the performance in processing images and needs little additional FPGA resources.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.948-950
• /
• 2003

In this literature, the CMOS current mode fout quadrant differentiator circuit is proposed. The implementation is base on an appropriate input stage that converts the input current into a compressed voltage at the input capacitor ($C_{gs}$) of the CMOS driver circuit. This input voltage use as the control output current which flow to the output node by passing through a MOS active load and use it as the feedback voltage to the input node. Simulation results with level 49 CMOS model of MOSIS are given to demonstrate the correct operation of the proposed configuration. But the gain of the circuit is too low so the output differentiate current also low. The proposed differentiator is expected to find several applications in analog signal processing system.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.601-604
• /
• 2004

In this paper, we propose a driving circuit that can be operated with a lower voltage than that of the conventional circuit without reducing the discharge voltage. the circuit proposed in this paper has a merit to improve the electrical characteristics because it can be composed of switching devices with low voltage. The operation and efficiency using real devices. The features of the circuit proposed in this paper are as follows; the power loss can be decreased by the use of low voltage, the cost if the driving circuit for PDP can be reduced by the use of switching devices operated with low voltage.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.699-702
• /
• 2005

This paper describes a high speed interface using redundant multi-valued logic for high speed communication ICs. This circuit is composed of encoding circuit and decoding circuit. Because of the multi-valued data conversion, this circuit makes it possible to achieve higher operating speeds than that of a conventional binary logic. Using this logic, a 1:4 DEMUX (demultiplexer) was designed using a 0.35um standard CMOS technology. Proposed circuit is achieved an operating speed of 4.5Gb/s with a supply voltage of 3.3V and with power consumption of 53mW.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.232-234
• /
• 2006

We proposed a new sustaining driver for AC PDPs with reduced sustain voltage by half, which cope with the demerits of the conventional TERES circuit. In the proposed circuit, the number of active switching elements are smaller than the TERES circuit by two and the energy recovery circuit is added. In this paper, the proposed circuit is implemented with control circuits and its validity is verified by the experimentation.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.847-850
• /
• 1998

One of the most difficult problem of designing VLSI is a mixed-circuit design, that is to design circuit containing both analog parts and digital parts. Digital to analog converter and analog to digital converter is a typical case. Especially it can be a serious problem when mixed circuit are put into a large digital circuit like microcontroller. However nowadays this problem is settled by separating analog circuit parts outside the IC. This technique is based on converting a digital signal into a pulse sequence. Then an analog signal is obtained by averaging this pulse sequence at the external low-pass filter. An anlog to digital converter is designed using a stochastic logic instead of a traditional PWM (pulse-width modulation) signal and ins implemente dusing FPGa. Stochastic pulse sequence can be made as a simple circuits and moreover can be mathematically processed by simple circuits -AND gates. The spectral property of stochastic pulse sequence method is better than that of PWM method. So it make easy to design a external low-pass filter. This technique has important advantages, especially the reduction of the ADC cost.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.224-228
• /
• 2003

In this paper, for phase lock loop(PLL) synthesizer, we introduce a novel but simple and low cost frequency modulation(FM) circuit of a flat peak frequency deviation for modulation signal from high to very low frequency penetrating into the loop-bandwidth of PLL. The FM circuit was basically designed to compensate an amount of feedback of the loop filter in PLL. The circuit also includes the capability of the adjustment of peak frequency deviation and blocking the interference with the loop filter. The designed circuit was successfully implemented and showed the flat frequency deviation as expected in the design.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.167-168
• /
• 2000

We propose a signaling circuit that can reduce power consumption and Electromagnetic Interference (EMI) in a Liquid Crystal Display (LCD) controller-to-source driver interface. The proposed signaling circuit consists of a coder/decoder that can minimize temporal bit transitions in a transmission line and a current-mode driver that can convert voltage swing into a very small amount of current. We have simulated the proposed signaling circuit using the HSPICE and the proposed signaling circuit has been designed in a 0.25 ${\mu}m$ CMOS technology.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.347-350
• /
• 2000

We present the design of ternary flip-flop which is based on ternary logic so as to process ternary data. These flip-flops are fabricated with ternary voltage mode NOR, NAND, INVERTER gates. These logic gate circuits are designed using CMOS and obtained the characteristics of a lower voltage, a lower power consumption as compared to other gates. These circuits have been simulated with the electrical parameters of a standard 0.25 micron CMOS technology and 2.5 volts supply voltage. The Architecture of proposed ternary flip-flop is highly modular and well suited for VLSI implementation, only using ternary gates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.506-514
• /
• 1997

In this paper, we implement digital circuit of despreading delay lock loop for GPS receiver. The designed system consists of Epoch signal generator, two 13bit correlators which correlates the received C/A code and the locally generated C/A code in the receiver, the C/A code generator which generates C/A code of selected satellite, and the direct digital clock synthesizer which generates the clock of the C/A code generator to control the phase and clock rate, the clock controller, and the clock divider. The designed circuit has the function of the acquisition and tracking by the autocorrelation characteristics of Gold code. The controller generates each other control signals according to the correlation value. The designed circuit is simulated to verify the logic functional performance. By using the simulator STR-2770 that generates the virtual GPS signal, the deigned FPGA chip is verified the circuit performance.