• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.137-142
• /
• 2023

When designing a SMPS(Switched Mode Power Supply) circuit, a part that is easily overlooked without special consideration is a snubber circuit. However, the performance degradation of the SMPS due to the snubber circuit and the effect on the entire SET cannot be ignored. In addition, a snubber circuit is added to both ends of the switch to protect the device from peak voltage and current during switching and to reduce loss during on/off switching. Therefore, in this paper, for a sufficient understanding of snubber circuits, theoretical analysis and experimental formulas that can be applied by designers during actual circuit design are arranged to promote optimization of snubber circuits.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.50-56
• /
• 2016

This paper proposes the architecture and design of intra prediction circuit for a multi-decoder supporting UHD images. The proposed circuit supports not only the latest video compression standard HEVC but also H.264. In addition to the basic function of performing intra prediction, this circuit has the capability of performing the reference sample filter operation defined in the H.264 standard, and the smoothing and strong sample filter operations defined in the HEVC standard. We reduced the circuit size by sharing the circuit blocks for common operations and internal storage, and improved the circuit performance by parallel processing. The proposed circuit was described at RTL using Verilog HDL and its functionality was verified by using NC-Verilog of Cadence. The RTL circuit was synthesized by using Design Compiler of Synopsys and 130nm standard cell library. The synthesized gate-level circuit consists of 69,694 gates and processes 100 ~ 280 frames per second for 4K-UHD HEVC images at the maximum operation frequency of 157MHz.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.2
• /
• pp.24-33
• /
• 1971

A noble method of delta modulation by means of pair transistor circuit having negative resistance charcteristic is presented. An RC parallel circuit is inserted between two eiuitter tarminals of the pair transistor circuit, and their emitters are driven by a square pulsed current source. Basically this is a relaxation oscillator circuit. But when the value of capacitors and resistanc R, and the pulse height of driving source are properly chosen, the RC parallel circuit apparently functions as integrating circuit of driviving pulses. Compared with the integrated voltage of capacitor C, a signal input voltatage supplied in series with RC parallel circuit between two emitters makes on or off either of the pair transistors. as the result, one bit pulse is sent out from the coupling resistance terminal of conducted transistor. The circuit diagram used for this experiment is presented, it i% composed with simple mod ulster circuit, differential amplifier and pulse shaping amplifier, The characteristics of the components of this ciruit are discussed, and especially quantumized noise in this delta modulation system is discussed in order to improve the signal to noise ratio which has a close relation with circut constants, quantumized voltage, pulse height and width of driving current source.

• The Journal of the Korea Contents Association
• /
• v.6 no.3
• /
• pp.38-45
• /
• 2006

A dual-level low voltage differential signalling (DLVDS) circuit is proposed aiming at reducing transmission lines for a LCD driver IC. We apply two data to the proposed DLVDS circuit as inputs. Then, the transmitter converts two inputs to two kinds of fully differential signals. In this circuit, two transmission lines are sufficient to transfer two inputs while keeping the LVDS feature. However, the circuit has a common mode bias fluctuation due to difference of the input bias and the reference bias. We compensate the common mode bias fluctuation using a feedback circuit of the current source bias. The receiver recovers the original input data through a level decoding circuit. We fabricated the proposed circuit using $0.25{\mu}m$ CMOS technology. The simulation results of proposed circuit shows 1-Gbps/2-line data rate and 35mW power consumption at 2.5V supply voltage, respectively.

• Journal of Power Electronics
• /
• v.5 no.3
• /
• pp.233-239
• /
• 2005

In this paper, a new conceptual circuit configuration of a 3-phase voltage source, soft switching AC-DC-AC converter using an IGBT module, which has one ARCPL circuit and one ARDCL circuit, is presented. In actuality, the ARCPL circuit is applied in the 3-phase voltage source rectifier side, and the ARDCL circuit is in the inverter side. And more, each power semiconductor device has a novel clamp snubber circuit, which can save the power semiconductor device from voltage and current across each power device. The proposed soft switching circuits have only two active power semiconductor devices. These ARCPL and ARDCL circuits consist of fewer parts than the conventional soft switching circuit. Furthermore, the proposed 3-phase voltage source soft switching AC-DC-AC power conversion system needs no additional sensor for complete soft switching as compared with the conventional 3-phase voltage source AC-DC-AC power conversion system. In addition to this, these soft switching circuits operate only once in one sampling term. Therefore, the power conversion efficiency of the proposed AC-DC-AC converter system will get higher than a conventional soft switching converter system because of the reduced ARCPL and ARDCL circuit losses. The operation timing and terms for ARDCL and ARCPL circuits are calculated and controlled by the smoothing DC capacitor voltage and the output AC current. Using this control, the loss of the soft switching circuits are reduced owing to reduced resonant inductor current in ARCPL and ARDCL circuits as compared with the conventional controlled soft switching power conversion system. The operating performances of proposed soft switching AC-DC-AC converter treated here are evaluated on the basis of experimental results in a 50kVA setup in this paper. As a result of experiment on the 50kVA system, it was confirmed that the proposed circuit could reduce conduction noise below 10 MHz and improve the conversion efficiency from 88. 5% to 90.5%, when compared with the hard switching circuit.

• The KIPS Transactions:PartA
• /
• v.19A no.4
• /
• pp.175-180
• /
• 2012

This paper describes the design of high-performance pedestrian and vehicle detection circuit using the Haar-like features. The proposed circuit uses a sliding window for every image frame in order to extract Haar-like features and to detect pedestrians and vehicles. A total of 200 Haar-like features per sliding window is extracted from Haar-like feature extraction circuit and the extracted features are provided to AdaBoost classifier circuit. In order to increase the processing speed, the proposed circuit adopts the parallel architecture and it can process two sliding windows at the same time. We described the proposed high-performance pedestrian and vehicle detection circuit using Verilog HDL and synthesized the gate-level circuit using the 130nm standard cell library. The synthesized circuit consists of 1,388,260 gates and its maximum operating frequency is 203MHz. Since the proposed circuit processes about 47.8 $640{\times}480$ image frames per second, it can be used to provide the real-time detection of pedestrians and vehicles.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.11-18
• /
• 2018

A pulse detonation engine (PDE) requires high operating frequency greater than 100 Hz to get meaning thrust as a propulsion devise. Thus a PDE needs an ignition circuit operating precisely at high operating frequencies. In this paper AC(alternating current) and DC(direct current) types of ignition circuits were designed and compared. Each circuit was tested at operating frequencies from 16.66 to 100.00 Hz by measuring the input signal of each circuit and the voltage change in the primary coil of the transformer. Results show that the DC power circuit can attain a maximum error rate of 5.15% at higher operating frequencies, whereas the AC power circuit displays a negligible agreement with the operating signal at frequencies greater than 33.33 Hz. Therefore it is confirmed that DC-powered ignition circuit is preferable for the PDE operating at high frequencies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.10-16
• /
• 2021

This paper proposes a model that considers the parity-time symmetric structure as a state detection circuit for sensor applications using a stretchable inductor. In particular, to obtain a more practical computer simulation result, the stretchable inductor model was applied to this study model by referring to previously reported experimental results. The resistance component and phase component were controlled through the negative differential resistance circuit used in this study. In addition, the imbalance of the circuit caused by a change in the characteristics of the stretchable inductor could be compensated for using a negative differential resistance circuit. In particular, an analysis of the frequency characteristics of the sensor driving circuit of the parity-time symmetric structure proposed in this study confirmed that the Q-factor could be increased up to 20 times compared to the conventional resonant circuit.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.3
• /
• pp.205-210
• /
• 2022

A novel OLED pixel circuit is proposed in this paper that uses only n-type thin-film transistors(TFTs) to improve the luminance non-uniformity of the AMOLED display caused by the threshold voltage variation of an OLED driving TFT. The proposed OLED pixel circuit is composed of 6 n-channel TFTs and 2 capacitors. The operation of the proposed OLED pixel circuit consists of the capacitor initializing period, threshold voltage sensing period of an OLED·driving TFT, image data voltage writing period, and OLED·emitting period. As a result of SmartSpice simulation, when the threshold voltage of·OLED·driving TFT varies from 1.2 V to 1.8 V, the proposed OLED pixel circuit has a maximum current error of 5.18 % at IOLED = 1 nA. And, when the OLED cathode voltage rises by 0.1 V, the proposed OLED pixel circuit has very little change in the OLED current compared to the conventional OLED pixel circuit. Therefore, the proposed pixel circuit exhibits superior compensation characteristics for the threshold voltage variation of an OLED driving TFT and the rise of the OLED cathode voltage compared to the conventional OLED pixel circuit.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.239-258
• /
• 2013

The purpose of this study is to define what circuit repairing ability is and to check improvement in learner's circuit repairing abilities by verifying conformity of learner's achievement of target goals that have been derived from headlight assignment based on circuit repairing ability that has been categorized into six sub-factors, which are preparing ability, attaching/detaching ability, circuit analyzing ability, inspecting and measuring ability, repairing (problem solving) ability and organizing ability. In order to achieve the purpose of study, degree of improvement in circuit repairing ability of learner's group was measured through experiment design and verification by group of experts. SPSS statistics program was used for statistical analysis in which average value for descriptive statistics, Cronbach ${\alpha}$ coefficient and t-test were conducted. Level of significance for t-test was p<.05. The conclusions from conducting this study are as follows. Firstly, the usage of terminology 'circuit repairing ability' pertaining to ability to repair failure of electrical devices in automobiles was confirmed to be appropriate. Secondly, the categorization of circuit repairing ability into sub-factors of preparing ability, attaching/detaching ability, circuit analyzing ability, inspecting and measuring ability, repairing (problem solving) ability and organizing ability was confirmed to be appropriate. Thirdly, field instruction on headlight assignment that has been revised according to achievement of learner's goals was confirmed to be effective in improving learner's circuit repairing abilities compared to regular training. Fourthly, field instruction on headlight assignment that has been revised according to achievement of learner's goals was confirmed to be effective in improving sub-factors of circuit repairing abilities, which are preparing ability, attaching/detaching ability, circuit analyzing ability, inspecting and measuring ability, repairing (problem solving) ability and organizing ability.