• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.499-505
• /
• 2001

The objective of the paper was to measure the pressure drop and to investigate the recirculation region of the conical orifices used in Kwang-yang Iron & Steel Company. The flow field with water used as a working fluid was the turbulent flow for Reynolds number of $2{\times}10^4$. The effective parameters for the pressure drop and the recirculation region were the conical orifice's inclined angle (${\theta}$) against the wall, the interval(L) between orifices, the relative angle of rotation(${\alpha}$) of the orifices, the shape of the orifice's hole(circle, rectangle, triangle) having the same area. It was found that the shape of the orifice's hole affected the pressure drop and the flow field a lot, But the other parameters did not make much differences to the pressure drop. The PISO algorithm with FLUENT code was employed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1434-1437
• /
• 2003

Sometimes open holes are required for the function and the weight reduction of structure and machinery. However, the serious stress concentration occurs because of the geometric discontinuity caused by the holes and cutting section. In this study, it is attempted to obtain the stress concentration coefficients of the inner surface of the hole boundary by changing the position and the shape of holes on the homogeneous isotropic plate. And the effects on the plate are investigated. The results show that the stress level becomes low and the distribution area widens the position of stress concentration changes as the ratio a/b increases and change to a circle. And as the ratio a/l decreases, the stress concentration reduces. As the plate with three holes. the stress $\sigma$$\_$x/ and $\tau$$\_$xy/ of hole 1,3 becomes high, especially $\sigma$$\_$x/ dominant and high.

• 한국레이저가공학회지
• /
• 제9권1호
• /
• pp.17-23
• /
• 2006

The technologies of laser micromachining are changed toward more complex-micropatterning, from the micro circle-shaped hole drilling to the micro arbitrary-shaped hole drilling. In this paper, the fundamental experiments by using DPSS 3rd harmonic $Nd:YVO_4\;laser({\lambda}=355nm)$ were carried out in order to obtain the feasibility of flexible micropatterning by various fixed masks. Fixed masks and Galvano scanners were investigatde to make micro patterns. from these experimental results, micropatterns on PEN film were rapidly manufactured in large area.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1373-1383
• /
• 2018

Experimental study was conducted to investigate the seismic behavior of roof joint. Eight full-scale specimens were tested considering the effects of axial force, joint height, hole shape of base plate and edge distance of concrete on the failure mode and resistance capacity of roof joint. With the increase of axial force, the hysteretic curves were fuller. The mechanical model of roof joint change from bending to shear. With the increase of joint height, the ultimate strength of roof joint decreased. If the hole shape of base plate changed from circle to loose, the slip behavior of roof joint appeared and the ultimate strength of roof joint decreased. The damage of edge concrete may occur if the edge distance of concrete was not big enough.

• 암석학회지
• /
• 제9권4호
• /
• pp.205-210
• /
• 2000

암석중에 미립(직경 0.3mm내외)으로 존재하는 조암광물의 동정 및 결정학적인 배향도를 미소부 X선 회절분석기를 이용하여 측정하였다. 실험에 사용된 표품들은 $A1_{2}SiO_{5}$ 3상디형(규선석, 남정석, 홍주석)으로서 모든 표품들은 박편상의 것을 측정대상으로 하였다 측정에 이용된 X선 회절분석기는 3(${\omega}\;{\chi}\;{\phi}$)축 회전 측각기 및 위치민감형 검출기로 구성되어 있으며 X선원으로는 $CuK_{\alpha}$를 사용하였으며 직경 $50\;\mu\textrm{m}$의 시준기를 사용하였다. 광물 동정은 3(${\omega}\;{\chi}\;{\phi}$)축 회전 측정법에 의해 시행되었으며, 박편표면에 우세하게 나타나는 광물상의 격자면을 알아보기 위해 2(${\omega}\;{\phi}$)축 회전 측정을 실시하였고 2축 회전 측정법에 의해 우세하게 나타난 회절선에 대한 격자방향의 배향도와 극분포를 확인하기 위하여 X-선 극점도 측정을 시행하였다. 3축 회전 측정결과 측정대상 광물상에 대해 동정이 가능하였으며 2축 회전 측정과 X-선 극점도 측정결과 규선석(310), 남성석(200), 홍주석(122)극이 절단면, 즉 박편표면의 법선방향으로 잘 발달하고 있음을 확인할 수 있었다. 본 측정법은 편광현미경을 사용하여 식별이 용이하지 않은 미립조암광물의 동정과 배향도를 알아보는데 유용하게 사용될 수 있는 분석기법이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.421-426
• /
• 2003

For the replacement of deteriorated concrete decks or wider-span slab, composite slab could be very attactive due to higher stiffness and strength. Based on the previous research, a modified I-beam composite hollow slab was suggested. In order to investigate the static flexural behavior of the proposed composite slab and to suggest its flexural design method, experiments were performed. Judging from the tests, a composite slab with I-beam having a semi-circle hole showed better structural performance. The effect of web details on the flexural stiffness was negligible. Flexural stiffness, ultimate strength, and ductility of the composite slabs were significantly greater than the RC slab due to composite action. While the failure of the RC slab was punching shear failure, the composite hollow slab showed flexural cracking and failure by yielding of the I-beams and crushing of concrete. Therefore, the current one-way design concept is appropriate for the design of I-beam composite hollow slab.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.833-836
• /
• 2002

Sometimes open holes are required for the function and the weight reduction of structure and machinery. However, the serious stress concentration occurs because of the geometric discontinuity caused by the holes and cutting section. In this study, it is attempted to obtain the stress concentration coefficients of the inner surface of the hole boundary by changing the position and the shape of holes on the homogeneous isotropic plate. And the effects on the plate are investigated. The results show that the stress level becomes low and the distribution area widens the position of stress concentration changes as the ratio ah increases and change to a circle. And as the ratio a/l decreases, the stress concentration reduces.

• Design & Manufacturing
• /
• 제2권4호
• /
• pp.16-23
• /
• 2008

This paper describes $R_p,\;R_d,\;R_c,\;R_{cp},\;R_{cd}$ for design and manufacture of die by comparing the results. Results of this study could be reduced from three processes to two processes and drawing can be conducted using one die set by modifying structure of the punch head and die plate. Oil canning phenomenon can be prevented when circle blanking or ellipse blanking in blanking drawing. $R_c$, the important factor of drawing process was able to evaluate properly in designing of product.

• 한국위험물학회지
• /
• 제6권2호
• /
• pp.62-67
• /
• 2018

It is very important to classify explosion hazardous area in order to prevent an accident explosion. In order to prevent such a explosion, the Industrial Safety and Health Standards Rules stipulates the establishment and management of explosion hazards in accordance with the criteria set by the Korean Industrial Standards. This study has investigated the range of the explosion hazardous area according to various hole sizes, pressures, vapor densities, and wind velocities in the outdoor flammable liquid tank using KS C IEC-60079-10-1 $2^{nd}$ Ed.(=IEC CODE) and PHAST. The results show that the explosion hazardous areas by IEC CODE have circle shapes. However, the areas by PHAST show ellipse shapes. The different of the explosion hazardous areas increases with the increase of wind velocity.

• 한국통신학회논문지
• /
• 제39B권5호
• /
• pp.281-290
• /
• 2014

무선 센서 네트워크의 실시간성은 단대단 거리를 기반으로 각 노드에서 유지해야할 최소 전송 속도를 정의하고 이를 만족하는 노드들을 매 홉마다 선택함으로써 일정 시간 내에 목적지까지 도달하는 것을 보장하는 것이다. 따라서 실시간성은 소스와 싱크사이의 거리에 매우 의존적이다. 하지만 전달과정 중 음영지역을 만난 경우에 이를 우회하기 위한 탐지 시간과 전송 노드에서는 예상할 수 없는 음영지역의 크기 때문에 이동 거리를 예상할 수 없게 된다. 따라서 노드는 실시간성을 위해 유지해야할 최소한의 전송속도를 정의할 수 없게 되고 실시간 전송에 문제가 발생한다. 따라서 이 문제를 해결하고자 음영지역 주변 노드 스스로 음영지역을 탐지하고, 이를 이용하여 소스는 음영지역을 탐지하지 않고 우회지점을 통해 고정된 거리를 우회함으로써 전송 중 음영지역으로 인한 문제를 해결하는 방안을 제안한다. 제안된 방안은 음영지역 경계노드들이 스스로 음영지역 근처에 위치하고 있는 것을 인지하고 상호간에 통신을 통하여 음영지역을 모델링함으로써, 데이터를 전송할 소스는 해당 음영지역 정보를 탐지하지 않고 우회하는 방법을 사용한다. 시뮬레이션은 기존방안에 비해 더 나은 실시간성을 가지는 것을 보인다.