• Environmental Analysis Health and Toxicology
• /
• 제15권1_2호
• /
• pp.45-51
• /
• 2000

Analytical method of 4-nitrotoluene (4-NT) in water was developed by 9as chromatography/mass selective detector/selected ion monitoring (GC/MSD/SIM). 4-NT was extracted with diethyl ether. Organic layer was washed with 5 % sodium chloride solution. The influence of solvent and evaporation condition on extraction of 4-NT were examined. The retention time of 4-NT peak was 7.72 min. Coefficient of variation (CV) of 4-NT (ng) within day and day-to-day was ranged from 7.0 to 14.6% and from 7.7 to 20.8%, respectively. Recovery of 4-NT was ranged from 84 to 109%, and detection limit of 4-H was lese than 1 ng/㎖.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.141-146
• /
• 2005

Calix[4]crown-6-2,4-bis(4-aminobutyl ether), which has a crown-6 moiety at the 1,3-position and amino function at the 2,4-position, was prepared as an intermediate for the subsequent synthesis of calix[4]crown-6-containing polyamide and polyimide using adipoyl chloride and 1,2,4,5-benzenetetracarboxylic dianhydride. The chemical structures were characterized by IR, $^{1}H NMR$ spectroscopy and elemental analysis, and some of their physical properties, including their thermal behavior, were examined. The ion binding characteristics of the monomer and polymers for alkali metal and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. It has been observed that polyamide has a high binding ability towards various metal cations as compared to polyimide, which showed cesium ion selectivity.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.427-430
• /
• 2004

Calix[4]crown-6-2,4-bis(2-hydroxyethyl ether) (2), which has crown-6 moieties at the 1- and 3-positions and hydroxyethyl functions at the 2- and 4-positions, was prepared for the syntheses of polyester 3 and polyurethane 4 by reactions with adipoyl chloride and hexamethylene diisocyanate, respectively. The ion binding characteristics of monomer 2 and polymers 3 and 4 toward alkali and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. We observed that the polyurethane 4 has a higher binding affinity toward various metal cations when compared to polyester 3, which exhibits cesium ion selectivity.

• Fisheries and Aquatic Sciences
• /
• 제15권3호
• /
• pp.191-195
• /
• 2012

We report here the use of high-speed countercurrent chromatography (HSCCC) in the preparative isolation and purification of the bioactive component, fucosterol, from Pelvetia siliquosa. A crude extract was obtained by ultrasonic extraction of powdered P. siliquosa using methylene chloride and was then subjected to separation and purification by HSCCC, coupled with evaporative light-scattering detection. Preparative HSCCC was performed successfully using a two-phase solvent system, n-heptane:methanol (3:2, v/v), to obtain 10.96 mg fucosterol with 96.8% purity from 50 mg of crude extract; the recovery rate was approximately 90.5%.

• Bulletin of the Korean Chemical Society
• /
• 제25권6호
• /
• pp.806-808
• /
• 2004

A gas chromatography/mass spectrometric assay method has been developed for the simultaneous determination of icing inhibitors, ethylene glycol monomethyl ether and diethylene glycol monomethyl ether in ground water contaminated with JP-8. Ethylene glycol monobutyl ether and ethylene glycol monoethyl ether were used as the internal standard and surrogate, respectively. 100 mL of ground water was extracted twice with 20 mL of methylene chloride. The extract was concentrated to dryness, dissolved with 100 ${\mu}$L of methanol and analyzed by GC-MS (SIM). The use of an Innowax column gave the peaks good chromatographic properties, and the extraction of these compounds from samples gave recoveries of about 50% with small variations. The method detection limits of the target compounds were in a range of 0.5-0.8 ng/mL in ground water.

• Preventive Nutrition and Food Science
• /
• 제9권4호
• /
• pp.295-299
• /
• 2004

Alpha-tocopherol was thermally oxidized and degraded at high temperatures and the resulting products were chromatographically separated and identified by LC-MS. Alpha-tocopherol dissolved in glycerol was heated at 200^{\circ}C for 30 min. The thermal products were separated by hexane extraction and analyzed by HPLC using a reversed phase $\mu$-Bondapak $C_{18}-column$ with two kinds of elution solvents: a mixture of acetonitrile and methanol (3:2), and of acetonitrile, methanol, 2-propanol, chloroform and methylene chloride (3:2:5:0.5:0.5) in a gradient mode. The isolated thermal. products of alpha-tocopherol were more viscous than alpha-tocopherol, and dark brown in color. Major thermal degradation products of alpha-tocopherol were identified by LC-MS, and the structures of thermal products were proposed. Alpha-tocopherol and its thermal degradation products were degraded into fragments, mainly at the non-aromatic parts. The degradation products of alpha-tocopherol. were combined with oxidized product (tocopherylquinone) to make thermal. products through dimerization.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.273-281
• /
• 2010

Nickel recovery method was studied by the wet process from the catalyst used in hydrogenation process. Nickel content in waste catalyst was about 16%. At the waste catalyst leaching system by the alkaline solution, selective leaching of nickel was possible by amine complex formation reaction from ammonia water and ammonium chloride mixed leachate. The best leaching condition of nickel from mixed leachate was acquired at the condition of pH 8. LIX65N as chelating solvent extractant was used to recover nickel from alkaline leachate. The purity of recovered nickel was higher than 99.5%, and the whole quantity of nickel was recovered from amine complex.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.493-498
• /
• 1995

Ultrathin networks of itaconic acid copolymers and poly(allylamine) were produced by a Langmuir-Blodgett (LB) technique employing a double-chain amine as a monolayer template which was subsequently removed by extraction after thermal crosslinking. Itaconic acid copolymers used were copoly (itaconic acid-ethyl vinyl ether) and copoly (itaconic acid-n-butyl vinyl ether). The polyion-complexed monolayers of three components consisting of template amine, itaconic acid copolymer and poly (allylamine) were formed at the air-water interface. The Langmuir film properties have been studied by the surface pressure-area isotherm and fluorescence microscopy. The monolayers were transferred on solid substrates and were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). Two-dimensional polymer networks were formed through imide or amide linkages by heat treatment under vacuum. The heat-treated films were extracted with chloroform after immersion in aq. sodium chloride to remove the template amines. SEM observation of a LB film on a porous fluorocarbon membrane filter with pore diameter of 0.1 μm showed covering of the pores by six layers in the polyion complex state.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2296-2302
• /
• 2018

Internally plasticized PVC was prepared via chemical reaction of azide PVC and alkynyl group containing castor oil methyl ester. The chemical structure of alkynyl group containing castor oil methyl ester and internally plasticized PVC was characterized with FT-IR and $^1H$ NMR. Properties of internally plasticized PVC, including thermal stability, tensile tests and resistance to extraction in different solvents, was investigated. The results showed that alkynyl group containing castor oil methyl ester, as internal plasticizer of PVC, not only decreased the $T_g$ of PVC from $84.6^{\circ}C$ to $41.6^{\circ}C$ efficiently, but also presented no plasticizer loss in five different solvents. The tensile tests showed that elongation at break and tensile strength of internally plasticized PVC was 353.8% and 18.1 MPa. The internally plasticized PVC has potential application in replacing the traditional PVC material in PVC products with high durability.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.341.2-341.2
• /
• 2002

An efficient process for the solution-phase synthesis of biaryl amides has been developed. Girard's reagent T. an inexpensive scanvenger. was found to be very efficient in trapping excess aromatic acid chlorides. resulting in water soluble by-products. which were easily removed from the products by liquid-liquid extraction. The ease of use. and the excellent purity of the amide libraries obtained are important features of this protocol. (omitted)