• The Korean Journal of Malacology
• /
• v.13 no.1
• /
• pp.65-70
• /
• 1997

This strdy was performed to investigate the effect of chitin, chitosan and dithiocarbamate chitosan against cadmium accumulation. The Scapharca subcrenata were divided into four independent groups which were one control and three experimintal groups by camium alone treatmint or chitin, chitosan and dithsan and dithiocabamate chitosan which cadmium. Samples were analyzed by Varian 30/40 atomic absorption spectrophotometer. The results obtained were as follows;1. The cadmium concentration in water were isgnificantly decreased in three experimental group compared with that of control group (P<0.05)2. The cadmium concentration in muscle of S. srbcrenata in cadmium alone treatment group were similar to that of the chitin treatmint group, but chitosan and dithiocarbamate chitosan treatmint groups were significantly decreased (P<0.05)In conclusion, this study revealed the effect of chitin chitosan and dithiocarbamate chitosan against cadmium accumulation. It exhibited the highest effect at dithiocarbamate chitosan treatment group.

• Biomolecules & Therapeutics
• /
• v.9 no.4
• /
• pp.244-248
• /
• 2001

This study was performed to investigate therapeutic effects of Carthami Semen, Paeoniae Raidx extracts and chitosan on the growth and differentiation of human periodontal ligament cell. We found that co-treatment of methanol extracts of Carthami Semen and chitosan significantly increased the growth of human periodontal ligament cell. However, the sigle treatment groups of the extracts showed only 20-30% of the growth increase. Alkaline phosphase activity, one of differentiation markers, was increased approximately 1.5- fold by co-treatment of methanol extract of Carthami Semen and chitosan and calcified nodule formation was also increased at the similar levels as the alkaline phosphatase. But the single treatment groups showed only 20-30% increases. These results suggest that Carthami Semen and chitosan co-treatment can be used efficiently for periodontium regeneration.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.987-996
• /
• 2005

For cationization, if chitosan, which has the affinity for a human body and reacts easily without inducing any pollution, is used, cationization of Tencel blended fabrics can be expected and further expansion of its use as a new susceptible material can be expected. Therefore, in this study, in order to compare a Tencel/cotton and a Tencel/Cotton/PET as Tencel blended fabrics with a Tencel single fabric, the fabric samples were used and processed with chitosan after NaOH pretreatment and enzyme treatment thereof, and then its adherent efficiency was enhanced by using a crosslinking agent, and then it was got to be finished with a softener. The fibril of Tencel fabric was controlled by enzyme treatment so that the surface of the Tencel blended fabrics got to be smooth. Chitosan adhered to the surface of the Tencel blended fabrics in the form of particles through its processing with chitosan. Chitosan treatment caused little change in the crystal structure thereof and the thermal stability of the Tencel/Cotton/PET fabric was slightly improved. The total hand value(THV) calculated on the basis of the change due to chitosan treatment was increased in all samples.

• Journal of Fashion Business
• /
• v.9 no.2
• /
• pp.71-83
• /
• 2005

In this study, we reviewed the color changes accompanying the laundering, wash fastness, and abrasion fastness of chitosan-treated cochineal-dyed fabrics. The treatment methods were classified into two based on the chitosan treatment: (Method 1): fabric specimens were pre-treated with chitosan prior to the dyeing procedure in salt form. (Method 2): the state of chitosan acid salt formation, coated on the yarn surface, was destroyed and neutralized prior to the dyeing process. The changes in the chitosan treatment methods bear more important meaning in view of the durability. In Method 1, it is highly likely for the chitosan to be detached from the surface by water during laundering since the chitosan is coated as acid salt state. In Method 2, the resistance d the chitosan to water was supposed to revive since the chitosan would return to its original state. Differences in the resistance of the chitosan treatrrent, however, according to the Method 1 and Method 2, fell short of our expectations. In Method 2, the wash fastness did not improve as we expected since the bond between the fibers comprising fabric specimens and the chitosan is not high even if the chitosan itself has high resistance to water.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.748-755
• /
• 2008

The purpose of this study is to investigate the effect of chitosan treatment on the dyeing of cotton fabric using charcoal as colorants. Particle size of charcoal, dyeability(K/S), SEM morphology of dyed fabrics and color fastness were also investigated. In this study, cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye by the chemical linking of chitosan to the cellulose structure. The results obtained were as follows; Mean average diameter of charcoal was 1.44 ${\mu}m$. According to various conditions, the dyeing effects of 1% chitosan treatment on the dyeing of cotton fabrics using charcoal were the highest with 10%(owb) of charcoal at $90^{\circ}C$ for 120minutes and non-treatment of cotton fabrics were the highest with 15%(owb) of charcoal at $90^{\circ}C$ for 150minutes. Overall, K/S value of 1% chitosan treatment of cotton fabrics on the natural dyeing using charcoal was higher than non-treatment of cotton fabrics. It was observed the surfaces of cotton fabrics treated with chitosan were adsorbed with charcoal powders of particle size more than a non-treated chitosan fabric by SEM. The cotton fabrics were dyed with blackish gray color by charcoal gradually according to treating chitosan. The K/S value, that is indicative of dye affinity, became higher as the increase of treated chitosan concentration. The color fastness of charcoal, washing and light fastness was excellent as 4-5 grade.

• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.667-675
• /
• 2010

This research did chistosan and cation treatment to raise K/S vlue. In this result, chitosan 1%, cation 4% treatment showed the highest K/S value. Gilycyrrhizae radix dyeing showed the highest K/S value in pH3, pre-mordant, $30^{\circ}C$, 80 min.. Its color Y, YR. K/S value over 2.5 times showed in chitosan treatment fabrics, 5 times in cation treatment fabrics than cotton fabrics on the condition of none-mordant ones. In the antibacterial activity, staphylococus showed 99.9% in all fabrics. Klebsilla Pneumonia also showed 97.1% in chitosan treatment fabrics and it showed 99.9% in other all fabrics. In the deodorization and UV-cut effect, the more K/S value and the larger effect was showed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.5
• /
• pp.686-695
• /
• 2000

Recently, with a growing interest of health and environment, chitosan which was good in no harmful effect to human body and environment, has been watched as the finish treatment of hygiene and pleasantness. The purpose of this study is to develop multifunctional fabric that was improved antimicrobial activity and deodorization rate, water absorption, static voltage and dye absorption by treatment of nylon 6 grafted with acrylic acid added in chitosan. FT-IR spectra of the grafted with acrylic acid added in chitosan shows peaks of COOH and NH2. Antimicrobial activity and deodorization rate of chitosan and grafted with acrylic acid added in chitosan were increased greatly than the control, durability of laundry of grafted with acrylic acid added in chitosan was good. In case of chitosan was dyed acid dyes and grafted with acrylic acid added in chitosan was dyed basic dyes, dye absorption of them were increased than the control. Moisture regain, absorption time and tensile strength of grafted with acrylic acid added in chitosan was increased greatly than the control.

• The Research Journal of the Costume Culture
• /
• v.17 no.3
• /
• pp.424-430
• /
• 2009

Taegwondo uniforms need powerful durability in fabrics against friction and shock because of higher exercising power. Therefore, in this study we developed more comfortable Taegwondo uniform for functional fabrics(deodorization rate, antibacterial activity and static charge). Chitosan is a deacetylated product of chitin, has widely been used in the biomedical sector, food industry, and textile industry. For the purpose of this study, we used the chitosan, which was congenial to the human body. Then, we compared the differences between the chitosan treated fabrics and non treated fabrics of Taegwondo uniform(100% polyester, 65% polyester/35% cotton). Chitosan was dissolved in 1% acetic acid. Also, the fabrics were washed using distilled water. Afterward, its treatment with chitosan was completed by padding the sample to its wet pick-up at $80{\pm}5%$ and by heating $150^{\circ}$ for 3 minutes. The chitosan treated Taegwondo uniform was improved on deodorization rate than non treated uniform. And the chitosan treated Taegwondo uniform was improved remarkably the antibacterial activity in all samples. In the further researches, the static charge was reduced in chitosan treatment uniform.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.4
• /
• pp.59-68
• /
• 1998

This study was to investigate the effect of chitosan molecular weight, its charge density, and its surface coating treatment on the antibacterial properties of paper. For this study, E.coil was used for antibacterial experiment. Results obtained were as follows : 1. The antibacterial properties of chitosan was significant on the surface-treated sheet. 2. Antibacterial property surface treatment was appeared to be effective when film was formed on the paper surface. 3. The antibacterial properties of chitosan-treated paper was dependent on the amount and the molecular weight of chitosan used. The lower the molecular weight of the chitosan down to 30,000 the better the antibacterial properties in this experiment. 4. Determination of the degree of chitosan-deacetylation by colloidal titration method was consistent with the more complicated and conventional FT-IR method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.10
• /
• pp.1655-1664
• /
• 2009

Chitosan is an environment-friendly and natural cationic polymer that can be used as a hair cosmetic additive. Healthy hair and damaged hair samples were experimented on according to treatment conditions using a water-soluble chitosan. Chitosan treated hair samples were studied on the physical and mechanical property changes. It is most effective when the water-soluble chitosan treatment was adjusted to the Neutral (pH6.8) or Acid (pH4.5). When the water soluble chitosan was treated at pH4.5, the tensile strength, tensile elongation, and elasticity of decolorized hair all increased. The virgin and damaged hair both changed into elastic and soft hair. The effect of chitosan treatment is more noticeable in the healthy hair than in the damaged hair.