• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.440-446
• /
• 2010

Convergence of IT and BT is considered in many area, especially in medical care industry. The example of this trend is a capsule endoscope. But in a capsule endoscope, communication through human body has a few restrictions. At first, the transmit power should be limited not to have a bad effect on human organs and for the battery capacity. Second, the channel characteristic of human body has not been examined exactly. Third, general modulation / demodulation techniques which require a channel estimation cannot be used because of battery limit. There also may be a lot of interference signals because a capsule endoscope uses UWB bandwidth. In this paper, we introduce Chirp Spread Spectrum Differential Binary Phase Shift Keying(CSS-DBPSK) and propose Chirp Spread Spectrum On-Off Keying(CSS-OOK) which don't require a channel estimation and robust to interference signals. Using CSS-DBPSK or CSS-OOK, we can get 5 dB or 2~3 dB of Eb/N0 gain at 10-5 target BER. And if there are interference signals, those gains of CSS-DBPSK and CSS-OOK are increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1124-1131
• /
• 2014

The chirp spread spectrum (CSS) technique that transmits data signal by using a chirp signal is often used for maritime wireless communication systems such as sound detection radar systems for submarines. However, maritime multipath environment could reduce the data rate of the CSS system. To tackle the problem, an overlap-based CSS transmission scheme is proposed and analyzed in this paper: Based on the approximated Gaussian Q function, we derive a closed form expression of the bit error rate (BER) of the proposed overlap-based CSS system and investigate the mathematical relationship between the number of overlaps and the intersymbol interference (ISI).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.69-73
• /
• 2011

In the defence wireless communications, conventional Anti-Jamming techniques(Frequency Hopping/Spread Spectrum or Direct Sequence/Spread Spectrum) are used to overcome a intentional interfering signals which are single/multitone or partial band jammer etc. DS/SS techniques is very strong on tone jamming signal but not to be on a partial band jammer. So FH/SS AJ performances are expected method of an substitution of DS/SS, however FH/SS could not have good performance on some BMTJ(Band Multi-tone Jammer). So this paper proposes FH-CSS (Frequency Hopped - Chirp Spread Spectrum) to get more robustness against jammers(BMTJ, PBNJ) and analyze the AJ performances.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.988-995
• /
• 2019

In this paper, we propose the Tile Based Frequency Hopping - Chirp Spread Spectrum(TBFH-CSS) technique, which has excellent Low Probability of Intercept(LPI)/Anti-Jamming(AJ) performance. Conventional Frequency Hopping - Chirp Spread Spectrum(FH-CSS) technique uses only single chirp signal, that makes the follower jammer easy to find and jam. However, proposed TBFH-CSS uses various kind of chirp signals which are generated according to the structure of basis tile, it is composed the basis time unit and the basis bandwidth unit. The TBFH-CSS signal has variety signal period and signal bandwidth. Therefore, the follower jammer hard to find and difficult to jam the TBFH-CSS signal. We analysis the LPI/AJ performance of the TBFH-CSS technique when the follow jamming attack exist and compared with the performance of the conventional FH-CSS technique. From the analysis, we can see the proposed TBFH-CSS technique has better LPI/AJ performance than conventional technique.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.10
• /
• pp.994-1001
• /
• 2009

CSS (Chirp Spread Spectrum) specified in IEEE 802.15.4a can be used for ranging applications. In this paper, we apply the CSS to estimate the coordinates of a mobile robot. Four anchor nodes are installed at known positions and a tag node is attached to the target mobile robot. By CSS ranging, we measure the distances between each anchor and the tag node. Based on the measured distances, the coordinates of the mobile robot can be calculated by the method of trilateration. However the calculated coordinates are not accurate because of the errors of the measured distances. Therefore we propose an algorithm for reducing the effect of the errors. The proposed algorithm is executed with the extended Kalman filter. Through localization experiments, we show the performance of the proposed algorithm and the accuracy of the estimated position.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.469-475
• /
• 2009

Overlap is one of the techniques for increasing bit rate in chirp spread spectrum (CSS). More overlaps can offer higher data throughput; however, they may cause more intersymbol interference (ISI) at the same time, resulting in serious bit error rate (BER) performance degradation. Thus, the number of overlaps should be decided according to the required BER performance. In this paper, we derive a closed form expression for BER of the overlap-based CSS system, exploiting the approximated Gaussian Q function. The derived BER expression includes the number of overlaps as a parameter, and thus, would be very useful in determining the number of overlaps for a specified BER. The numerical results demonstrate that the BER derived in a closed form closely agrees with the simulated BER.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.187-189
• /
• 2009

Position estimation in indoor is significant problem, because GPS which is usually used for outdoor positioning cannot be utilized to indoor positioning. Sensor network can be a solution for the positioning. Recently, chirp spread spectrum(CSS) specified in IEEE 802.15.4a provides an ability of ranging. Based on the results of the ranging, a position of a CSS node can be calculated by using trilateration. In this case, Kalman filter can be applied to the trilateration because of the measurement noise. In this paper, we apply the unscented Kalman filter for the trilateration. The trilateration can be represented to a nonlinear state space equation, and the unscented Kalman filter is suitable for nonlinear state space equation. Through the experimental results. we show the accuracy of the estimated position.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.99-104
• /
• 2011

The chirp spread spectrum (CSS) technique spreads the data signal over a frequency bandwidth wider than minimum required bandwidth. By using time overlapping, the bit rate in CSS can be increased. However, for reliable transmission of data signal, the intersymbol interference (ISI) due to overlap should be analyzed. In this paper, the relation between the degree of overlap and ISI is analyzed in direct modulation binary phase shift keying CSS systems. In some cases, the overlap does not incur ISI at all and the ISI fluctuates or monotonically increases as the number of overlaps changes. It is also shown that the simulation results closely agree with the analytic results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.13-25
• /
• 2008

In this paper, we propose the Location Awareness System adjusting Ranging Technology for CSS(Chirp Spread Spectrum) which is adopted on 2.45GHz standard in IEEE 802.15.4a and TOA(Time-of-Arrival) algorithm. The conventional methods have adopted RSSI, ultrasonic waves and infrared rays in Zigbee. RSSI measures strength indication of received signal and recognizes the position of nodes in RF boundary. However, this technology has the following problems; lots of error by the change of the channel environment and much power consumption. In this paper, adopting chirp pulse on 2.45GHz standard in IEEE 802.15.4a and SDS-TWR(Symmetrical Double Side-Two Way Ranging) method using the characteristic of Spread Spectrum, a new Location Awareness System is suggested. The distance and the coordinate are measured within ${\pm}\;5cm$ by TOA(Time of Arrival) algorithm and proposed algorithm and the data in error rate is decreased less than 1%. Through these results, the algorithm suggested in this paper is verified for its performance in a computer simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.24-31
• /
• 2010

A receiver architecture with low complexity for chirp spread spectrum (CSS) of IEEE 802.15.4a is proposed. To demodulate the received signal at the highest signal to noise power ratio, matched filter is generally adopted for the receiver of wireless communication systems. It is, however, not resonable to adjust the matched filter to the receiver of CSS whose objectives are low complexity, low cost and low power consumption since complexity of the matched filter is high. In this paper, we propose a new receiver architecture using differential multiplication and accumulator not matched filter for demodulation. Also, bi-orthogonal decoder implemented by only adder/subtractor is proposed. The hardware resources for implementation are reduced in the proposed receiver architecture, although bit error rate performance is low compared with the receiver architecture based on the matched filter.