• 한국안전학회지
• /
• 제9권4호
• /
• pp.17-28
• /
• 1994

Chip breaking is important in lathe work for maintaining good surface of the products and safety of operator. The purpose of this study is to investigate the performance of chip breaking and chip shape resulted from the carbide inserts with grooved type and obstruction type chip breaker. Experiments have been performed under the following cutting conditions, (1) constant cutting speed with variable depth of cut and feed rate, (2) constant depth of cut with variable cutting speed and feed rate. Also, the flying distance of chip and it's distribution have been investigated. As a results, good performance of chip breaking can be obtained for small radius of curvature and land width of grooved type chip breaker. And the thickness of chip increase with the increase of feed rate and decrease of cutting speed, and the chip breaking becomes easier with the increase of chip thickness due to the large deformation rate. Obstraction type chip breaker shows better performance of surface roughness than the grooved type. The flying distance of the chips over 90% are less than 1 meter, and the distance decreases as the feed rate decreases.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.993-997
• /
• 1997

The continuous chip depresses the accuracy of workpieces and promotes the wear of machine tools and hunts operators. So chip control os a major problem in turning process. In this paper, a method of chip identification is develope by pyrometer. The identifier is applied in real-time control of chip pattern with adjusting feedrate.

• 열처리공학회지
• /
• 제25권1호
• /
• pp.14-21
• /
• 2012

The effects of cutting condition and tempering temperature for the shape of cutting chip were investigated. For this purpose, a lead-free brass containing 1wt.% of Bi extruded at $750^{\circ}C$ in straight turning was used in this study. The cutting chip preferred was mainly found to be loose form of arc chips with curling discontinuity, and these were formed by shear fracture. However, some of fragmental element chip were found to be mixed when tempering temperature was as high as $500^{\circ}C$. The form and size of chip was more affected by feed rate than by tempering temperature and cutting rate. In addition, the cutting surface was observed to be formed more rough in the case of high feed rate and low cutting rate compared to low feed rate and high cutting rate.

• 한국건설순환자원학회논문집
• /
• 제10권3호
• /
• pp.327-334
• /
• 2022

이 연구에서는 목재칩 열병합발전소 바닥재를 잔골재로 활용한 모르타르 및 콘크리트 특성을 평가하고자 부순 잔골재 대용으로서 목재칩 골재대체율과 물시멘트비에 따른 모르타르 특성과 목재칩 골재대체율에 따른 콘크리트의 특성을 비교 및 평가하였다. 목재칩 골재 대체율에 따른 시멘트 모르타르의 플로우는 목재칩 골재 대체율이 높아질수록 증가하는 경향을 보이고, 압축강도와 휨강도는 목재칩 골재 대체율이 높아질수록 증가하였다. 콘크리트의 슬럼프와 공기량은 골재 대체율이 높아질수록 증가하고, 콘크리트의 압축강도와 인장강도는 목재칩 골재 대체율이 증가할수록 높은 경향을 보였다. 이에, 열병합발전소로 인하여 발생하는 바닥재를 콘크리트용 잔골재로 활용하는 방안의 가능성을 확인하였다.

• 한국기계가공학회지
• /
• 제4권2호
• /
• pp.3-9
• /
• 2005

In this study, the chip breaking characteristics of S, PbS and BiS free machining steels have been assessed. PbS free machining steel shows the lowest value of chip thickness ($t_c$) under the same cutting conditions. SM10C steel has the largest value of the chip cross-section area ratio ($R_{CA}$). As the feed rate becomes larger the chip breaking cycle time ($T_B$) decreases and the chip breaking index ($C_B$) increases. The properly controlled-C type chip has been obtained with the value of $C_B$ between 0.05 and 0.2. Free machining steel, PbS produces the properly controlled-C type chip in a wider feed rate range than other steels.

• 한국주조공학회지
• /
• 제29권1호
• /
• pp.38-44
• /
• 2009

Magnetic separation of Fe contaminated Al-Si cutting chip scraps was performed for the recyclability assessment. It was also aimed to investigate the casting and solidification characteristics of the cutting chip scraps. The magnetically separated cutting chip scraps were adequately treated for the casting procedure and test specimens were made into a stepped mold inducing different cooling rates. The test specimens were evaluated by the combined analysis of ICP, Spectroscopy, OM-image analyzer, SEM/EDS, etc. Solidification characteristics of cutting chip scraps were examined as functions of Fe content and cooling rate. It is concluded that the magnetic separation process can be utilized to recycle the Fe contaminated Al-Si cutting chip scraps in the high cooling rate foundry process.

• 한국통신학회논문지
• /
• 제35권2A호
• /
• pp.128-133
• /
• 2010

본 논문에서는 나카가미 페이딩 채널 환경에서 전력 혹은 전송률 적응화 된 직접 대역확산 부호분할 다중접속 통신시스템에서의 최적 칩률에 관하여 연구한다. 주파수 효율을 최대화하는 최적의 칩률은 다중경로 세기 프로파일과 직접파 성분, 그리고 적응화 방식에 의해 결정됨을 알았다. 전송률 적응화 방식에서의 최적의 칩률은 채널 파라미터에 상관없이 다중경로 지연 확산 $1/T_m$ 보다 적다. 이 결과는 전송률 적응화 방식에서는 상관 수신기가 RAKE 수신기보다 더 높은 주파수 효율을 얻을 수 있다는 것을 의미한다. 반면에 전송 전력 적응화 방식에서는 최적의 칩률과 그에 상응하는 RAKE 수신기의 탭 수가 다중경로 세기 프로파일과 직접파 성분에 관한 함수임을 알 수 있었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.19-21
• /
• 2005

The ball shea. tests for ball grid array (BGA) and flip chip packages were carried out with different displacement rates to find out the optimum condition of the displacement rate for this test. The BGA packages consisted of two different kinds of solder balls (eutectic Sn-37wt.%Pb and Sn-3.5wt.%Ag) and electroplated Au/Ni/Cu substrate, whereas the flip chip package consisted of electroplated Sn-37Pb solder and Cu UBM. The packages were reflowed up to 10 times, or aged at 443 K up to 21 days. The variation of the displacement rate resulted in the variations of the shear properties such as shear force, displacement rate at break, fracture mode and strain rate sensitivity. The increase in the displacement rate led to the increase of the shear force and brittleness of solder joints.

• 대한의생명과학회지
• /
• 제21권1호
• /
• pp.32-39
• /
• 2015

High-risk (HR) human papillomavirus (HPV) genotypes are strongly associated with cervical cancer, whereas other HPV genotypes are not. To identify the various HPV genotypes in clinical samples, we conducted HPV genotyping using a DNA chip test and reverse blot hybridization assay (REBA) in normal cytology samples and atypical squamous cells of undetermined significance (ASCUS) cytology samples. We also investigated the HPV infection rate and HPV genotype prevalence in women with normal cytology and ASCUS cytology. Liquid-based cytology preparations were used for the initial screening of 205 subjects with normal cytology and ASCUS cytology. The HPV infection rate was 49.8% when using the DNA chip assay and 61.0% when using the REBA test. In patients with normal cytology, the HR-HPV positive rate was 21.9% with the DNA chip assay and 43.9% with the REBA test. In contrast, 8.3% of patients with ASCUS were HR-HPV positive when using the DNA chip assay, and 13.6% were positive when tested with the REBA test. The infection rate of HR-HPV in the 40~50-year age group was significantly higher than that of the other age groups. Based on the cytological analysis of the normal and ASCUS samples, the five most prominent HPV genotypes were HPV 16, 18, 68, 33, and 58 using the DNA chip test, and they were HPV 16, 18, 53, 33, and 66 when using the REBA test. In conclusion, the findings show that the results of the REBA test are comparable to those of the DNA chip test. Most strikingly, the REBA test detected the HR-HPV genotype associated with cervical carcinoma similar to that detected with the DNA chip method. Therefore, the REBA test is a useful method to detect clinically important HR-HPV genotypes.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.131-137
• /
• 1999

Package crack caused by the soldering process in the surface mounting plastic package is evaluated by applying the energy release rate criterion. The package crack formation depend on various parameters such as chip set, chip size, package thickness, package width, material properties and the moisture content etc. The effects of chip set and the other parameters were estimated during the analysis of package cracks which were located in the edge of the upper interface of the chip and the lower interlace of the die pad. From the results, it could be obtained that the more significant parameters to effect the chip set are chip width.