• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.121-127
• /
• 2018

A system for diagnosing surface defects of long and large pipe inner overlay welds, 1m in diameter and 6m in length, was developed using a Liquid Penetrant Test (PT). First, CATIA was used to model all major units and PT machines in 3-dimensions. They were used for structural strength analysis and strain analysis, and to check the motion interference phenomenon of each unit to produce two-dimensional production drawings. Structural strength analysis and deformation analysis using the ANSYS results in a maximum equivalent stress of 44.901 MPa, which is less than the yield tensile strength of SS400 (200 MPa), a material of the PT Machine. An examination of the performance of the developed equipment revealed a maximum travel speed of 7.2 m/min., maximum rotational speed of 9 rpm, repeatable position accuracy of 1.2 mm, and inspection speed of $1.65m^2/min$. The results of the automatic PT-inspection system developed to check for surface defects, such as cracks, porosity, and undercut, were in accordance with the method of ASME SEC. V&VIII. In addition, the results of corrosion testing of the overlay weld layer in accordance with the ferric chloride fitting test by the method of ASME G48-11 indicated that the weight loss was $0.3g/m^2$, and met the specifications. Furthermore, the chemical composition of the overlay welds was analyzed according to the method described in ASTM A375-14, and all components met the specifications.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.2
• /
• pp.99-104
• /
• 2010

The purpose of this study is to develop Sewage Treatment Plant that treat sewage which occurred in ship using fixed media method and to consider applicable to the Pilot Scale device of the STP regulations in MLTM(Ministry of Land, Transport and Maritime Affairs) and MEPC(Marine Environment Protection Committee). In test results, pH geometric mean was 7.68, $BOD_5$(Biochemical Oxygen Demand) geometric mean was 7.28 mg/l, $COD_{cr}$(Chemical Oxygen Demand) geometric mean was 48.39 mg/l, TSS(Total Suspended Solid) geometric mean was 18.00/l, Residual chlorine geometric mean was 0.19 mg/l, and E. coli geometric mean was 1CFU/100 ml. In addition, about 97.4% of $BOD_5$ was reduced, the $COD_{cr}$ reduction averaged 96.4%and the TSS reduction averaged 97.6%. STP have been determined by the MLTM and MEPC regulation of the marine pollution prevention equipment for performance testing product.

• Environmental Analysis Health and Toxicology
• /
• v.28
• /
• pp.2.1-2.7
• /
• 2013

Objectives Tricalcium phosphate and calcium hydrogenorthophosphate are high production volume chemicals, mainly used as foodstuff additives, pharmaceuticals, lubricants, synthetic resin, and disinfectants. Phosphate has the potential to cause increased algal growth leading to eutrophication in the aquatic environment. However, there is no adequate information available on risk assessment or acute and chronic toxicity. The aim of this research is to evaluate the toxic potential of phosphate compounds in the aquatic environment. Methods An aquatic toxicity test of phosphate was conducted, and its physico-chemical properties were obtained from a database recommended in the Organization for Economic Cooperation and Development (OECD) guidance manual. An ecotoxicity test using fish, Daphnia, and algae was conducted by the good laboratory practice facility according to the OECD TG guidelines for testing of chemicals, to secure reliable data. Results The results of the ecotoxicity tests of tricalcium phosphate and calcium hydrogenorthophosphate are as follows: In an acute toxicity test with Oryzias latipes, 96 hr 50% lethal concentration ($LC_{50}$) was >100 (measured:>2.14) mg/L and >100 (measured: >13.5) mg/L, respectively. In the Daphnia test, 48 hr 50% effective concentration ($EC_{50}$) was >100 (measured: >5.35) mg/L and >100 (measured: >2.9) mg/L, respectively. In a growth inhibition test with Pseudokirchneriella subcapitata, 72 hr $EC_{50}$ was >100 (measured: >1.56) mg/L and >100 (measured: >4.4) mg/L, respectively. Conclusions Based on the results of the ecotoxicity test of phosphate using fish, Daphnia, and algae, $L(E)C_{50}$ was above 100 mg/L (nominal), indicating no toxicity. In general, the total phosphorus concentration including phosphate in rivers and lakes reaches levels of several ppm, suggesting that phosphate has no toxic effects. However, excessive inflow of phosphate into aquatic ecosystems has the potential to cause eutrophication due to algal growth.

• Food Science and Preservation
• /
• v.18 no.1
• /
• pp.39-45
• /
• 2011

We explored the quality characteristics of Sulgidduk prepared using different amounts of cheese powder (0%, 6%, 12%, 18%, 24%; all w/w); physico-chemical properties were determined. Proximate composition analysis showed that the moisture content of Sulgidduk decreased with a rise in the level of added cheese powder. Lightness and yellowness values were lowest in control Sulgidduk and highest in Sulgidduk with 24% added cheese powder. Texture profile analysis showed that all of hardness, cohesiveness, springiness, and brittleness increased with a rise in cheese powder level. Scanning election microscopy indicated that the number of air cells fell as the ratio of cheese powder to rice powder increased. Sensory evaluation tests indicated that color, cheese smell, and greasiness rose as the cheese powder level increased, whereas softness and moistness fell. Consumer acceptance testing showed no significant difference in overall acceptability scores among samples. In conclusion, we suggest that cheese powder may be incorporated into Sulgidduk without affecting sensory qualities.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.2
• /
• pp.180-186
• /
• 2009

In this study, Crotalaria sessiliflora L., leaf was extracted with a solvent mixture of $CH_2Cl_2$ and $CH_2OH$ (3:1). In order to draw or separate effective components from the leaf extract with high activity, a 1:1 solvent mixture of water and butanol was used after removal of the sugar and fat from the extract. From the decompressed and concentrated butanol layer, 10 small fractions (Fr1, Fr2, Fr3, Fr4, Fr5, Fr6, Fr7, Fr8, Fr9, and Fr10) were obtained using a chromatography column filled with sephadex LH-20. The activity of each fraction was measured by the same method as that used to measure the antioxidant effect of each part(p<0.05). The Fr1, Fr4, and Fr6 fractions showed the highest activity levels(p<0.05). The vital unknown material that vitality exists in the strong butanol fractions of F1, F4 and F6 will be isolated and identified. Currently, we are performing for a single compound from an unknown peak by instrumental analysis.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.77-81
• /
• 2020

Commercialization of flexible OLED displays, such as rollable and foldable displays, has attracted tremendous interest in next-generation display markets. However, during bending deformation, cracking and delamination of thin films in the flexible display panels are the critical bottleneck for the commercialization. Therefore, measuring mechanical properties of the fragile thin films in the flexible display panels is essential to prevent mechanical failures of the devices. In this study, tensile properties of the metal and ceramic nano-thin films were quantitatively measured by using a direct tensile testing method on the water surface. Elastic modulus, tensile strength, and elongation of the sputtered Mo, MoTi thin films, and PECVD deposited SiN_x thin films were successfully measured. As a result, the tensile properties were varied depending on the deposition conditions and the film thickness. The measured tensile property values can be applied to stress analysis modeling for mechanically robust flexible displays.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1318-1322
• /
• 2008

The aim of this study was to analyze the antioxidant properties of Lycii folium extracts prepared from different solvents. Lycii folium were extracted with water, 80% ethanol (80% EtOH), 80% methanol (80% MeOH) and 100% methanol (100% MeOH) in water bath at $40^{\circ}C$. The antioxidant activity of the extracts was evaluated using DPPH, hydroxyl and hydrogen radical scavenging activities, and SOD-liked activity. Total phenolic acid contents were 1.085 mg/mL in 100% MeOH, 1.382 mg/mL in 80% EtOH, 1.420 mg/mL in 80% MeOH and 1.084 mg/mL in water. DPPH radical scavenging activity of the extracts were 65.60% in 80% EtOH, 56.80% in 80% MeOH, 83.85% in 100% MeOH and 54.65% in water. Hydroxyl radical scavenging activities were 66.65% in 100% MeOH, 73.13% in 80% ethanol, 73.58% in 80% MeOH and 70.73% in water. Hydrogen radical scavenging activity of the extracts prepared from Lycii folium were 11.70% in 100% MeOH, 33.73% in 80% EtOH, 35.40% in 80% M eOH and 23.86% in water. SOD-liked activity of the extracts prepared from Lycii folium was 71.58% in 100% MeOH, 74.29% in 80% EtOH, 88.46% in 80% MeOH and 67.47% in water. Our result showed that Lycii folium extracts prepared from 80% methanol were found to be promising biomaterials with antioxidant effects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.654-664
• /
• 2006

Statement of problem: There has been a eat interest in the use of titanium for fixed and removable prostheses in recent because of its excellent biocompatibility. However, the melting temperature and chemical reactivity of titanium necessities casting system different from those used in conventional casting. The current titanium casting systems are based on an electric-arc design for melting the metal in an argon atmosphere and its exclusive investment. Despite the new development in Ti casting system, inadequate mold filling and internal porosity are frequently observed casting defects. Purpose : The purposes of this study were to compare the castibility and reaction layer of the casting titanium under the two casting machines and their investment condition. Material and method: coping and machine-milled titanium coping according to the casting methods and the marginal configurations. The total 28 specimens were used, and these are divided into 4 groups according to 2 casting machines and 2 investments. The castings were analyzed using x-ray microanalysis and microhardness testing. The reaction layer between margin of titanium casting and the investments was observed and analyzed with scanning electron microscope. Result: 1. Castabiliy of casting titanium specimen was best in the group of centrifugal casting machine and Selevest $CB^{\circledR}$ and good that of Selevest CB and pressure differential casting machine, Rematitan plus and centrifugal casting machine, Rematitan plus and pressure differential casting machine in order. 2. There was no significanct correlation in titanium castability in respect of casting machine. However ANOVA indicated that Selevest $CB^{\circledR}$ groups had significantly better castability than Rematitan $plus^{\circledR}$ groups.(p<0.05) 3. There was a significant microhardness difference between centrifugal casting machine groups and pressure differential groups.(p<0.05) Titanium castings in centifugal groups had significantly harder than those in pressure differential groups. 4. The addition of zirconia decreased interfacial reactivity. Conclusion: above result revealed that of the castability of titanium casting specimens had little correlation in casting machines and was better in magnesia-based investment contained ZrO2 groups. However in order to practice casting titanium in clininic, its castability should be improved, also there should be more research on factor of castability so that long-span prothesis and removable partial denture metla frame may be casted completly.

• Composites Research
• /
• v.29 no.2
• /
• pp.79-84
• /
• 2016

An adhesive can be used to connect two different materials in structures. In comparing with other connecting methods, such as bolt, rivet, and hot melting, the adhesive does not need to use them. It leads to reduce the weight and decrease the stress concentration along the connecting line. This work studied the comparison of mechanical and interfacial properties of commonly-used two adhesives, acrylic type and bisphenol-A epoxy type. Tensile and flexural strength of neat adhesives were also compared. Lap shear test of two adhesives was deduced from the measurement of tensile and fatigue tests. After testing, the failure patterns of adhesive surfaces were observed by a microscope. Tensile strength and mechanical fatigue resistance at using bisphenol-A epoxy adhesive were better than acrylic adhesive. Also adding CNT reinforcement in epoxy adhesive can anticipate mechanical improvement.

• Korean journal of applied entomology
• /
• v.32 no.3
• /
• pp.323-329
• /
• 1993

These studies were conducted to evaluate the five comparative test methods for detecting chemical resistance and to investigate resistant level of field populations of diamondback moth (Plutella xylostella L.). Leaf disc method was practically rocomrnendable because of its rapidity and low CV(l1.4%). Topical application method was a precise replicabiliLy(CV=8.00/0) but it was time consuming and difficult in mampulation. The other 3 methods showed higher CV ranging from 14.9% to 21.4%. Based on $LC_{50}$ values by topical application method, field populations of diamondback moth collected from 4 different regions, Kwangju, Kimhae, Jeju, and Inje to prothiofos showed from 3.3 to 61.1 times higher resistance than the susceptible strain, whereas to cypermethrin, Lhey were from 7.5 to 141.7 times higher than the susceptible. To cartap hydrochloride, they showed from 10.5- to 33.3-fold resistant levels as high as the susceptible. Finally, based on $LC_{50}$ values to Bacillus thuringiensis by leaf disc technique, the resistant levels of the field populations were from 1.9 Lo 8.1 times as compared to the susceptible.