• Carbon letters
• /
• v.14 no.1
• /
• pp.45-50
• /
• 2013

Polyacrylonitrile (PAN) copolymers of different molecular weights were synthesized by a suspension polymerization and precipitation polymerization method. The rheology behaviors of the synthesized PAN copolymers were investigated in relation to their molecular weight, solid content and melting temperature. The influence of "historical effects" on the spinning solution of PAN was studied by analyzing the laws of viscosity considering the diversification time and temperature. The viscosity disciplines of each spinning solution conformed well to the rheological universal laws in a comparison of the suspension polymerization product with that of precipitation polymerization. Viscosity changes in the swelling process of dissolution were gentler in the suspension polymerization product; a small amount of water will quickly debase the solution viscosity, and high-speed mixing can greatly shorten the time required by the spinning solution to reach the final viscosity.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.515-518
• /
• 2002

The method of foam fractionation can be applied to enrich proteins from a dilute protein solution if the proteins are hydrophobic and foam. If a protein, such as invertase, is hydrophilic, a dilute solution containing this protein may not foam. In that case, a batch foam fractionation process may not be appropriate for recovering a concentrated solution of that protein. In this paper, various concentrations of invertase were added to a dilute solution containing bromelain (a hydrophobic protein), in order to determine how the presence of a hydrophilic protein can affect the recovery of the desired hydrophobic protein. The effect of invertase on bromelain recovery was studied here at an initial bulk solution pH of 5 and an air superficial velocity of 4.6 cm/s.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1512-1514
• /
• 2005

Catalytic properties of Ni-Zr$O_2$ catalysts prepared by coprecipitation have been studied for the gas-phase hydrogenation of 1,3-butadiene to butenes. The coprecipitation method led to the solid solution of Ni-Zr$O_2$, which contains highly resistant Ni species to thermal reduction with H2. Nickel species of the solid solution were highly dispersed in the ZrO2 lattice, so that the reduced catalysts were selective for hydrogenation of 1,3-butadiene to butenes (99.9%) even in the presence of 1-butene.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.1
• /
• pp.98-106
• /
• 2005

The chemical conversion film formed on magnesium alloy was investigated by using the colloidal silica with some parameters such as solution pH. temperature, solution conditions, and treatment time. Moreover. the solutions consisted of colloidal silica titanium sulfate, and cobalt ions were used for the colloidal silica film to having a good corrosion resistance and adhesion properties. It was thought that the film at 298K was made with combination of Si-O. The quantity of film formed at high temperature such as 333K and 353K is smaller than dissolved quantity during chemical conversion treatment. Adding $CoSO_4$ to the colloidal silica solution enhanced the adhesion force between the silica film and magnesium substrate, The optimum conditions for the chemical conversion treatment solution were PH 2.90 s treatment, and 298K.

• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.273-279
• /
• 2015

Effects of passive film quality by chemical passivation and solution flow on the corrosion behavior of 304 stainless steel in HCl solution were investigated using a coloration indicator, and by corrosion weight loss, electrochemical polarization and element dissolution measurements. A high redness degree suggests a low passive-film integrity for 304 stainless steel following air exposure, while the minimum redness degree for the samples after chemical passivation suggests a high passive-film integrity. In the static condition, samples subjected to air exposure exhibited a high corrosion rate and preferential dissolution of Fe. Chemical passivation inhibited the corrosion rate due to the intrinsically high structural integrity of the passive film and high concentrations of Cr-rich oxides and hydroxide. Solution flow accelerated corrosion by promoting both the anodic dissolution reaction and the cathodic reaction. Solution flow also altered the preferential dissolution to fast uniform dissolution of metal elements.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.45-51
• /
• 2017

Poly(urethane acrylate) siloxane oligomers with Interpenetrating polymer netwoked nanoparticles were prepared to synthesize hard coating solution by reaction with diisocyanates. The diisocyanate combined siloxane hard coating solution showed more flexibility than the siloxane solution. In addition, diisocyanate resulted in improvement of curl property and surface hardness in the siloxane solution. Of the used diisocyanates, isophorone diisocyanate and acryloyloxy ethyl diisocyanate were good for UV hard coating solution. This effect will decrease brittleness in the siloxane solution using for plastic display plate.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.7
• /
• pp.1369-1373
• /
• 2008

A stable twist boat conformation of thiane S-oxide 1a in solid state and in solution was unambiguously determined by single crystal X-ray crystallography and solution NMR analyses. On the contrary, the thiane Sdioxide 2 which was obtained from the oxidation of corresponding thiane S-oxide 1a was confirmed to adopt a regular chair conformation.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3433-3436
• /
• 2011

Some of metal nanoparticles have the potential for use as colorimetric assays for estimating solution properties, such as pH and temperature due to localized surface plasmon (LSP) phenomena. This report describes the use of silver nanoparticles (AgNP) conjugated with cytochrome c (Cyt c) for the colorimetric determination of solution pHs. When the pH of a solution decreases, the Cyt c immobilized on the AgNP undergoes a conformational change, leading to a decrease in the interparticle distance between Cyt c-AgNP probes and consequent red-shift in LSP. As a result, the color of the Cyt c-AgNP probe solution changes from yellow to red and finally to a grayish blue in the pH range from 11 to 3. This gradual color change can be used to determine the pH of a solution over a wide pH range, compared to other colorimetric methods that use gold nanoparticles.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.1
• /
• pp.65-70
• /
• 2000

An approximated analytical solution of mathematical model for the three phase fluidized bed bioreactor (TFBBR) was proposed using the linearization technique to describe oxygen utilization rate in wastewater treatment. The validation of the model was done in comparison with the experimental results. Satisfactory agreement was obtained in the comparison of approximated analytical solution and numerical solution in the oxygen concentration profile of a TFBBR. The approximated solutions for three modes of the liquid phase flow were compared. The proposed model was able to predict the biomass concentration, dissolved oxygen concentration the height of efficient column, and the removal efficiency.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.88-92
• /
• 2010

Isopropyl mercaptan is an important pharmaceutical intermediate and chemical material. And thiourea and triglycol are the main materials for the synthesis of isopropyl mercaptan. Therefore the dissolution of thiourea in triglycol solution is very important for the production of isopropyl mercaptan. The aims of this study are to examine the dissolution kinetics of thiourea in triglycol solution, and to present an alternative process for producing isopropyl mercaptan. In order to investigate the dissolution kinetics of thiourea in triglycol solution, the concentrations of solution and reaction temperature were selected as experimental parameters. It was determined that the dissolution rate of thiourea increased with the increase in solution concentration and temperature. An empirical equation was used in fitting the data. Statistical analysis indicated small errors and the results should be reliable.