• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.588-594
• /
• 2013

Under the condition of Baader aging, the chemical composition variation and the influence of transformer oil aging on electrical properties such as dielectric loss factor and physic-chemical properties such as interfacial tension were studied in the aging precess. Moreover, the correlation between hydrogenated transformer oil electrical and physic-chemical properties and its chemical composition variation were also investigated. The results show that these parameters of physic-chemical and electrical properties of hydrogenated transformer oil relate to each other and have closed correlation with chemical composition.

• 한국진공학회지
• /
• 제18권1호
• /
• pp.49-53
• /
• 2009

층간 절연막으로써 연구되고 있는 SiOC 박막의 화학적 변화에 대하여 살펴보았다. SiOC 박막의 형성은 알킬기와 수산기에 의한 극성분자의 조합에 의해 무분극성의 박막을 형성할 수 있고 무분극성에 의한 비정질 구조를 형성함으로써 유전상수의 감소를 유도할수 있다. 박막의 화학적인 특성은 이온의 변화에 의한 결정구조의 변화로 결정할수 있고, 화학적인 변화의 분석은 FTIR에 의한 탄소함량변화로부터 무분극성의 영역을 유추해 내었다. 전기적인 특성은 박막 내에서의 전자의 특성을 알아보는 것으로써 화학적인 특성과 반드시 일치하는 것은 아니다 유량변화에 따른 SiOC 박막의 전기적인 특성을 분석함으로써 화학적 특성의 변화와 어느 정도 상관성이 있는지를 조사하였다. SiOC 박막은 열처리 후 대체로 누설전류가 증가하는 것으로 나타났고 특히 탄소의 함량이 급격히 증가하는 샘플이 존재하였다. 그러나 탄소의 함량이 증가하였으나 누설전류는 상대적으로 작게 나타나는 것으로 보아 화학적인 관점에서 탄소의 증가는 박막의 구조변화에 따른 효과로 직접 전류에 기여하지 않는다고 볼 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제24권9호
• /
• pp.1265-1268
• /
• 2003

The estimation of retention factors by correlation equations with physico-chmical properties maybe helpful in chromatographic work. The physico-chemical properties were water solubility (S), hydrophobicity (P), total energy ($E_t$), connectivity index 1 ($^1{\chi}$), hydrophilic-lipophlic balance (x) and hydrophilic surface area (h) of isoflavones. The retention factors were experimentally measured by RP-HPLC. Especially, the empirical regulations of water solubility and hydrophobicity were expressed in a linear form. The equation between retention factors and various physico-chemical properties of isoflavones was suggested as $k = a_0 + a_1\;log S + a_2log\;P^Q + a_3(E_t) + a_4(^1{\chi}) + a_5(x) + a_6(h)$, and the correlation coefficients estimated were relatively higher than 0.95. The empirical equations might be successfully used for a prediction of the various chromatographic characteristics of substances, with a similar chemical structure.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.157-162
• /
• 2003

6FDA-based polyimides were prepared from the thermal imidization reaction of 6FDA with diamines of BAPAF, DAP, and DABA having a polar group of hydroxyL or carboxyl. Properties of the dense polyimide membranes were characterized and their gas permeation properties for H$_2$, $CO_2$, $O_2$, $N_2$, and CH$_4$ were investigated. Permeabilities, diffusion coefficients and diffusivity selectivities of polar group-containing polyimide membranes including 6FDA-BAPAF, 6FDA-DAP, and 6FDA-DABA polymer for the gases did not change largely. The separation properties of 6FDA-TrMPD polyimide membrane used as a reference polymer were compared with those of the polyimide membranes mentioned above. It was found that the polyimides of 6FDA-BAPAF, 6FDA-DAP, and 6FDA-DABA, which were soluble in alcohol or/and 2-methoxyethanol, could be applicable to the preparation of a dense composite membrane by dip-coating method.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1471-1474
• /
• 2011

A series of new polymers containing 1,2,3-triazoles were synthesized and their structures and properties were characterized by FT-IR, $^1H$ NMR, TGA, DSC and GPC. The results showed that the polymers modified by alkyl groups had good solubility, thermal stability and reasonable molecular weights. It was also demonstrated that the properties of fluorine-containing polymers were seriously affected by fluorine atoms with hydrophobic and chemical proof properties.

• Bulletin of the Korean Chemical Society
• /
• 제29권12호
• /
• pp.2521-2524
• /
• 2008

• 한국연초학회지
• /
• 제29권1호
• /
• pp.1-7
• /
• 2007

This study was conducted in order to predict the chemical and physical properties by climatic factors during the growing season of flue-cured tobacco as soon as possible. The data of eight chemical and five physical properties were collected from "Analysis of physical and chemical properties on farm leaf tobacco" conducted at KT&G Central Research Institute from 1987 through 2006. Data of climatic factors from April to July in 10 districts were collected from Korea Meteorological Adminstration. Except for yellowness(b), all probabilities of linear regression equations between the climatic factors(X) and the average contents of twelve grades(whole plant) for chemical and physical properties(Y) were significant($P{\leq}0.05$). The predicable probabilities within ${\pm}20%$ range of difference were 100% in ether extract content, in nicotine content, and in filling value, 90% in total nitrogen content, and 70% in total sugar content. These results suggest that the regression equations may be useful to predict the average content of twelve grades for eight chemical and four physical properties by climatic factors during the growing season of flue-cured tobacco at the beginning of August.

• 한국연초학회지
• /
• 제29권1호
• /
• pp.8-13
• /
• 2007

This study was conducted in order to predict the chemical and physical properties by climatic factors during the growing season of burley tobacco as soon as possible. The data of six chemical and five physical properties were collected from "Analysis of chemical and physical properties on farm leaf tobacco" conducted at KT&G Central Research Institute from 1987 to 2006. Data of climatic factors from April to July in 6 districts were collected from Korea Meteorological Adminstration. Except for total nitrogen, total nitrogen/nicotine and yellowness(b), all probabilities of linear regression equations between the climatic factors(X) and the average contents of twelve grades(whole plant) for chemical and physical properties(Y) were significant($P{\leq}0.05$). The predicable probabilities within ${\pm}20%$ range of difference were 100% in ether extract content, 95% in nicotine content, and 90% in filling value. These results suggest that the regression equations may be useful to predict the average content of twelve grades for four chemical and four physical properties by climatic factors during the growing season of burley tobacco at the beginning of August.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.201-210
• /
• 2017

We studied the antibacterial effect and mechanical properties of PLA composites with in organic porous zeolite-type bacteriocides. The specimens were prepared by an intermeshing co-rotating twin screw extruder using different contents of inorganic bacteriocide. The degree of dispersion of the in organic bacteriocide in the PLA composite was confirmed by FE-SEM. The contents of Ag and Zn in the composite were also investigated by energy dispersive spectroscopy at different concentrations of the inorganic bacteriocide. The antibacterial effects were analyzed by turbidity analysis, shaking culture, and drop-test. The mechanical properties, such as the tensile and flexural properties, impact strength, and physical properties, were also investigated. As the content of inorganic bacteriocide increased, the antibacterial activity was increased, especially against Staphylococcus aureus. Mechanical properties, namely, tensile strength, elongation, flexural strength, and impact strength, tended to decrease with an increase in inorganic bacteriocide content, but the tensile and flexural modulus increased.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.75-80
• /
• 2012

Polymer composites which have electrical properties have been studied in various industries. The Multi-walled carbon nanotube (MWCNT) are thought to be reinforcements for polymers because of their high aspect ratio and specially mechanical, thermal and electrical properties. We introduced MWCNT and impact modifier in order to improve thermal and mechanical properties of Polyphenylene sulfide (PPS) and give electric characteristic to PPS. The thermal properties were investigated by Differential scanning calorimeter (DSC) and Thermogravimetric analysis (TGA). The morphology, mechanical properties and electrical characteristic were performed by Field emission scanning electron microscopy (FE-SEM), Izod impact tester and surface resistance meter. As a result, we could find that the PPS/MWCNT composites have high conductivity and good mechanical properties than neat PPS resin.