• Nuclear Engineering and Technology
• /
• 제32권5호
• /
• pp.514-520
• /
• 2000

The mechanism of corrosion behavior has to be understood clearly to select an optimum material for handling molten salts to be used in the oxide reduction process of PWR spent fuel. In this study, the oxidation states of corrosion products on the surface of Inconel 600 and 800H as well as their chemical compositions and structural informations were determined by using XPS, ICP-AES, AAS, EPMA and XRD after the corrosion experiment with lithium molten salts at 75$0^{\circ}C$ for 25 hours. Nickel and oxygen were detected from the corrosion products on the surface of Inconel plates and chromium was found to be dissolved out into lithium molten salts leaving cracks on the surface. The corrosion products were identified as metal oxides such as Fe$_2$O$_3$, Cr$_2$O$_3$, NiO, NiFe$_2$O$_4$and MnO by using XPS and XRD.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.19-25
• /
• 2000

Dielectric polymer films produced from benzocyclobutene (BCB) formulations (CYCLOTENE＊ family resins) are known to possess many desirable properties for microelectronic applications; for example, low dielectric constant and dissipation factor, low moisture absorption, rapid curing on hot plate without reaction by-products, minimum shrinkage in curing process, and no Cu migration issues. Recently, BCB-based products for thick film applications have been developed, which exhibited excellent dissipation factor and dielectric constant well into the GHz range, 0.002 and 2.50, respectively. Derived from these properties, the applications are developed in: bumping/wafer level packaging, Ga/As chip ILD, optical waveguide, flat panel display, and lately in BCB-coated Cu foil for build-up board. In this paper, we review the relevant properties of BCB, then the application areas in bumping/wafer level packaging and BCB-coated Cu foil for build-up board.

• Animal Bioscience
• /
• 제36권5호
• /
• pp.768-775
• /
• 2023

Objective: Oilseeds and nut co-products can be used as alternative feed ingredients in animal diets because they may have a lower cost than traditional ingredients. A study was, therefore, conducted to determine the chemical composition of copra, palm kernel, and nut co-products from South-East Asia or Australia. The hypothesis that country of production influences nutritional composition was tested. Methods: Oilseed meals included 2 copra expellers, 3 copra meals, and 12 palm kernel expellers. One source of almond hulls and cashew nut meal were also used. Samples were obtained from suppliers located in South-East Asia or Australia. All samples were analyzed for dry matter, gross energy, nitrogen, amino acids (AA), acid-hydrolyzed ether extract (AEE), ash, minerals, insoluble dietary fiber, and soluble dietary fiber. Copra and nut co-products were also analyzed for total starch and sugars. Results: Copra expellers had greater (p<0.05) concentrations of dry matter and AEE compared with copra meal. However, copra meal had greater (p<0.05) concentrations of total dietary fiber (soluble and insoluble) and copper than copra expellers. Palm kernel expellers from Indonesia had greater (p<0.05) concentration of histidine and tyrosine compared with palm kernel expellers from Vietnam. Almond hulls was high in dietary fiber, but also contained free glucose and fructose, whereas cashew nut meal was high in AEE, but low in all free sugars. Conclusion: Copra expellers have greater concentration of AEE, but less concentration of total dietary fiber when compared with copra meal, and except for a few AA, no differences in nutrient composition of palm kernel expellers produced in Indonesia or Vietnam were detected. According to the chemical composition of nut co-products, cashew nut meal may be more suitable for non-ruminant diets than almond hulls.

• 한국산업보건학회지
• /
• 제16권1호
• /
• pp.68-80
• /
• 2006

This study aimed to prepare the fundamental data and assess the status and trend of exposure level for 5 chemical substances such as sulfuric acid, hydrogen chloride, ammonia, formaldehyde and phenol in manufacturing industry by type of industry, working process, and size of factory, chronological change. Subjects related to this study consist of 146 factories, 12 industries and 17 working processes located in Busan area from Jan. 1997 to Dec. 2001. 1. All 5 kinds of chemical substances by type of industry, working process were generated in chemical manufacturing industry. There were founded in 8 types of industries and 13 types of working processes for ammonia, which is the highest number of in all 5 chemical substances. 2. In terms of the exposure level for 5 chemical substances by type of industry, working process, geometric mean concentration for sulfuric acid was $0.40mg/m^3$ in manufacture of chemicals and chemical products, $0.30mg/m^3$ in compounding process, for hydrogen chloride was 0.57 ppm in manufacture of basic metal, 0.48 ppm in dyeing process, for ammonia was 1.11 ppm in manufacture of rubber and plastic products, 0.94 ppm in buffing process, for formaldehyde was 0.49 ppm in manufacture of wood and of products of wood and cork, except furniture; manufacture of articles straw and plating materials, 0.53 ppm in mixing process, and for phenol were 0.53 ppm in manufacture of chemical and chemical products, 0.55 ppm in compounding process, respectively. Results for 5 chemical substances by type of industry and working process were significantly higher than those of the others(p<0.05). 3. The exposure level for hydrogen chloride, formaldehyde were significantly increased by size of industry (p<0.01). ammonia was significantly decreased by size of industry (p<0.01). 4. In trend of the concentration difference of five chemical substances by chronology, geometric mean concentration for sulfuric acid was significantly increased (p<0.01), hydrogen chloride and ammonia were significantly decreased by year (p<0.05) and for formaldehyde and phenol were decreased in chronological change. According to the above results 5 chemical substances were founded together in a way mixed in the same places one another and concentrations of chemical substances by industry, working process, size of industry and year appeared markedly. The authors recommend more systemic and effective work environmental management should be conducted in workplaces generating five chemical substances.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4165-4166
• /
• 2011

• Bulletin of the Korean Chemical Society
• /
• 제18권3호
• /
• pp.287-291
• /
• 1997

The photochemical reaction of aqueous dichloromethane in the absence (saturated with argon) and the presence of O2 (saturated with air or oxygen) has been investigated using 184.9 nm UV light. The irradiation of the solution causes the formation of 1,2-dichloroethane, 1,1,2-trichloroethane, 1,1,2,2-tetrachloroethane and chloride ion. The initial quantum yield of the products in the absence of oxygen was determined to be 8.6 × 10-3, 7.3 × 10-3, 4.4 × 10-3 and 2.3 × 10-2, respectively. In addition to these main products, small amounts of 1,2,3-trichloropropane, 1,1,2,2,3-pentachloropropane, 1,1,2,3,3-pentachloropropane, 1,3-dichloropropane and 1,1,2,2,3,3-hexachloropropane were detected. In the presence of oxygen, hydrogen peroxide was also detected along with the products listed above. With increasing the concentration of oxygen, while formation of the chlorinated organic products diminished, formation of chloride ion increased. Probable reaction mechanisms for the photochemical reaction were presented on the basis of products analysis.

• 약학회지
• /
• 제19권3호
• /
• pp.144-158
• /
• 1975

• 대한화학회지
• /
• 제55권5호
• /
• pp.824-829
• /
• 2011

In Fischer-Tropsch Synthesis, because of few reactants ($H_2$, CO), scarce operating parameters affected on efficiency especially the selectivity of products. In this research, effect of operating parameters on the selectivity of Co-Mn-$TiO_2$ Fischer-Tropsch synthesis catalyst were studied by design of experimental procedure and Taguchi method. According to this research, interactions between operating factors have a crucial effect on light products selectivity. Among these interactions, (temperature${\times}$feed ratio) has the main influence on light hydrocarbons selectivity. It was concluded that temperature and feed ratio ($H_2$/CO) were the most integral operating parameters for much greater selectivity of light hydrocarbons.

• 대한화학회지
• /
• 제15권1호
• /
• pp.15-22
• /
• 1971

DL-1-Amino-pentyl phosphonic acid, DL-1-Aminopropyl phosphonic acid were synthesized with good yield from caproic acid and butyric acid using the modified Curtius reaction and N-derivatives, N-acetyl-DL-1-amino propyl phosphonic acid, N-acetyl-DL-1-aminopentyl phosphonic acid, N-Benzoyl-DL-1-amino-propyl phosphonic acid, were also prepared by a variety of methods including the Schotten-Baumann reaction. In addition, the chemical and physical properties of the products were investigated. All the products were also identified by means of elemental analysis, Infrared spectrophotometry, Ninhydrin test, and the determination of the neuralization equivalent.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.74-77
• /
• 2011

The production practices, productivity and economic performance of organic and non-chemical rice farming were compared in Jeonnam Province, Korea. Korean organic rice farming showed a lack of use of resistant varieties and rotational cropping systems as well as less use of farm wastes and a high dependency upon external inputs. When compared with no-chemical rice production practices very little differences were found. However, organic rice farming showed 15% to 18% higher profits than no-chemical farming even though the productivity was arguably similar between the two farming types. This may encourage more farmers to convert to organic production rather than non-chemical farming as the farming practices are very similar, thereby resulting in increased supply of organic products and decreased prices for organic rice near future. There is a need to more greatly differentiate organic farming practices and products from those of no-chemical farming.