• 제목/요약/키워드: chemical integration

검색결과 308건 처리시간 0.088초

Atomic Layer Deposition-incorporated Catalyst Deposition for the Vertical Integration of Carbon Nanotubes

  • Jung, Sung-Hwan
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권5호
    • /
    • pp.688-692
    • /
    • 2011
  • Carbon nanotubes (CNTs) are vertically grown inside high-aspect-ratio vertical pores of anodized aluminum oxide. A CNT catalyst layer is introduced by atomic layer deposition to the bottom of the pores, after which the CNTs are successfully grown from the layer using chemical vapor deposition. The CNTs formed a complete vertical conductive path. The conductivity of the CNT-vertical path is also measured and discussed. The present atomic layer deposition-incorporated catalyst deposition is predicted to enable the integration of CNTs with various challenging configurations, including high-aspect-ratio vertical channels or vertical interconnects.

다단제어용 안티 와인드업 기술 개발 (Development of Anti-windup Techniques for Cascade Control System)

  • 배정은;김경훈;추승철;허재필;임상훈;성수환
    • Korean Chemical Engineering Research
    • /
    • 제58권3호
    • /
    • pp.430-437
    • /
    • 2020
  • 본 연구에서는 다단제어(Cascade Control)를 위한 안티 와인드업(Anti-windup) 기술을 개발하였다. 다단제어는 외란을 보다 효과적으로 제어하기 위해 내부에 되먹임(Feedback) 제어루프를 추가한 제어구조이다. 단일루프제어(Single-loop Control)와는 다르게 두 개의 제어루프로 이루어져 내부의 종속제어루프(Secondary Control)가 외부의 주제어루프(Primary Control)에 영향을 미치는 특징을 가지고 있다. 산업현장에서 다단제어에 적용하는 기존의 안티 와인드업 기술은 주로 주제어기(Primary Controller)와 종속제어기(Secondary Controller)에 각각 로컬 역연산법(Back Calculation)을 적용하는 것이다. 하지만 이 방법은 종속제어기의 제어출력이 포화되었을 때 발생하는 주제어기의 적분누적(Integral-windup) 현상을 효과적으로 제거하지 못한다. 이를 해결하기 위해 기존 로컬 안티 와인드업 기술을 확대 적용한 두 가지의 다단제어용 안티 와인드업 기술을 제안한다. 첫 번째는 다단 조건부 적분법(Cascade Conditional Integration)이고 두 번째는 다단 역연산법(Cascade Back Calculation)으로 단일루프제어에 적용되어 왔던 로컬 조건부 적분법과 역연산법을 다단제어로 확대 적용하여 다단제어 시스템에서 PID제어기의 적분누적 현상을 방지하고자하였다. 개발한 다단 조건부 적분법과 다단 역연산법은 간단하고 직관적이면서도 종속제어기의 제어출력의 포화로 인해 발생한 적분누적현상을 효과적으로 방지할 수 있고 공정이나 제어기 형태에 상관없이 우수한 제어성능을 유지할 수 있었다. 향후 실제 공정 적용을 통해 신뢰성을 확보한다면 산업현장의 다단제어기 성능을 개선하는데 크게 기여를 할 수 있을 것이다.

바이오가스 기반 수소 생산공정에 대한 경제성 및 환경성 분석 (Techno-Economic Analysis and Life-Cycle Assessment for the Production of Hydrogen from Biogas)

  • 김현우;백영순;원왕연
    • 한국수소및신에너지학회논문집
    • /
    • 제32권5호
    • /
    • pp.417-429
    • /
    • 2021
  • Due to fossil fuel depletion and environmental pollution, H2 production from organic waste has received an increased attention. In this study, we present an integrated process for the H2 production from biogas and evaluate the economic feasibility and sustainability via rigorous techno-economic analysis (TEA) and life-cycle assessment (LCA). Through the TEA, we determine the minimum H2 selling price using discounted cash flow analysis and investigate the main cost drivers. The environmental impact of the proposed process is quantified via LCA.

LNG-FPSO 전처리 공정 에너지 시스템 분석 (Energy System Analysis of LNG-FPSO Pre-Ttreatment Processes by Heat Integration Technique)

  • 조하빈;김진국;민광준;임동하
    • 플랜트 저널
    • /
    • 제8권4호
    • /
    • pp.40-44
    • /
    • 2012
  • 천연가스를 사용하기 위한 전처리공정에서 제거되는 물질인 산성 가스는 주로 아민계열 흡수제를 이용한 흡수공정을 통해 제거된다. 흡수공정 중 흡수탑에서 일어나는 흡수제의 산성가스 흡수반응은 발열반응이기 때문에 상대적으로 낮은 온도가 요구되며 역 반응이 일어나는 재생탑은 흡열반응을 위한 높은 온도 환경이 요구된다. 이는 두 탑의 흐름들 간에 열교환의 가능성이 있음을 의미한다. 본 연구에서는 DEA 흡수제를 이용한 흡수공정을 다양한 조건에서 사례연구를 시행하여 에너지 시스템을 분석하였으며, 흡수탑과 재생탑의 측면유출이 흡수공정의 전체 효율을 향상시킬 수 있음을 확인하였다.

  • PDF

Graphene Oxide를 활용한 PAN 나노섬유 제조 및 물리적 특성 향상 (Integration of Graphene Oxide Into PAN Nanofibers with Improved Physical Property)

  • 이정훈;윤재한;변홍식
    • 멤브레인
    • /
    • 제27권3호
    • /
    • pp.255-262
    • /
    • 2017
  • 본 연구에서는 graphene oxide (GO)를 polyacrylonitrile (PAN)에 첨가하여 전기방사법을 이용해 나노섬유 복합막을 제조한 뒤 물리적 특성을 관찰하였다. GO의 제조는 개선된 Hummer's 방법을 이용하였으며, 표면처리가 되지 않은 GO의 경우 0.5 wt% 이상에서 전기방사가 이루어지지 않았다. GO의 안정성 및 분산도 증가를 개선하기 위해 계면활성제를 이용하여 GO의 표면처리를 하였다. 표면처리가 된 GO를 사용하여 나노섬유 복합막의 GO의 함량을 0.5 wt% 이상 첨가할 수 있었다. 특히, 표면처리가 된 GO가 첨가된 나노섬유 복합막은 향상된 물리적 특성을 가지며, 이는 나노섬유 분리막 내의 GO의 분산도와 상관관계가 있는 것으로 보인다.

Microbiome-Linked Crosstalk in the Gastrointestinal Exposome towards Host Health and Disease

  • Moon, Yuseok
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • 제19권4호
    • /
    • pp.221-228
    • /
    • 2016
  • The gastrointestinal exposome represents the integration of all xenobiotic components and host-derived endogenous components affecting the host health, disease progression and ultimately clinical outcomes during the lifespan. The human gut microbiome as a dynamic exposome of commensalism continuously interacts with other exogenous exposome as well as host sentineling components including the immune and neuroendocrine circuit. The composition and diversity of the microbiome are established on the basis of the luminal environment (physical, chemical and biological exposome) and host surveillance at each part of the gastrointestinal lining. Whereas the chemical exposome derived from nutrients and other xenobiotics can influence the dynamics of microbiome community (the stability, diversity, or resilience), the microbiomes reciprocally alter the bioavailability and activities of the chemical exposome in the mucosa. In particular, xenobiotic metabolites by the gut microbial enzymes can be either beneficial or detrimental to the host health although xenobiotics can alter the composition and diversity of the gut microbiome. The integration of the mucosal crosstalk in the exposome determines the fate of microbiome community and host response to the etiologic factors of disease. Therefore, the network between microbiome and other mucosal exposome would provide new insights into the clinical intervention against the mucosal or systemic disorders via regulation of the gut-associated immunological, metabolic, or neuroendocrine system.

변성아민 처리된 부직포를 이용한 복합방수공법의 도막·시트 간 화학적 일체화에 관한 연구 (A Study on the Chemical Integration between Coating Sheets of Complex Waterproofing Method Using Modified Amine-Treated Nonwoven Fabric)

  • 김선도;김진성
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 추계 학술논문 발표대회
    • /
    • pp.118-119
    • /
    • 2017
  • The combined waterproofing method is an excellent method to overcome the disadvantages of the single waterproofing method by composing two or more materials to complement each other, but it is a method that can cause defects such as separation and peeling between materials due to the heterogeneity of the applied two materials. In order to improve this, in this study, we aimed to develop a technology for inducing chemical unification between materials through a urea reaction with a coating material applied on the lower side by laminating a nonwoven fabric treated with a modified amine on the back surface of the sheet material, The adhesion performance test was carried out with the presence or absence of denatured amine treated nonwovens as variables. As a result of the test, it was confirmed that the adhesion performance of the specimen to which the modified amin - treated nonwoven fabric was applied was improved by about 60% or more as compared with the specimens not having the denatured amine treated specimen.

  • PDF

Human functions in innovation and sustainable marketing

  • Jat-Syu Lau;Ziyuan Li
    • Advances in concrete construction
    • /
    • 제16권2호
    • /
    • pp.97-106
    • /
    • 2023
  • This research endeavors to explore the enhancement of workforce economic efficiency through the application of nanotechnology, focusing on its economic implications. The findings of this investigation reveal that in recent years, surging global population growth and escalating demands for products and services have led to excessive resource consumption, resulting in adverse environmental consequences and altering environmental conditions-a phenomenon referred to as the economic growth dilemma. Entrepreneurs and economic stakeholders have begun to recognize the importance of sustainable development and the integration of environmental considerations into the production of goods and services. Within this context, knowledge-based economies have emerged as a driving force for sustainable business practices, particularly in the realm of nanotechnology. The integration of nanotechnology across various industries, including pharmaceuticals, agriculture, environmental management, and the chemical and petroleum sectors, as well as energy distribution, has yielded remarkable results. Consequently, this research aims to investigate the application and integration of nanotechnology in environmentally friendly silver nanoparticle production within select industries. Subsequently, it will examine the far-reaching implications of nanotechnology on economic growth and sustainable development.

$^1H-NMR$을 이용한 계피의 t-cinnamaldehyde 정량분석 (Quantitative Analysis of t-Cinnamaldehyde of Cinnamomum cassia by $^1H-NMR$ Spectrometry)

  • 송명종;유종수;백남인
    • Applied Biological Chemistry
    • /
    • 제48권3호
    • /
    • pp.267-272
    • /
    • 2005
  • 계피(계지, Cinnanmomum cassia)의 주요성분인, trans-cinnamaldehyde를 $^1H-NMR$ 분광법을 이용하여 정량분석하였다. 핵자기 공명법을 이용한 정량분석의 응용가능성을 확인하기 위하여, t-cinnamaldehyde의 $^1H-NMR$ 스펙트럼에서 시료의 농도와 측정온도를 변화시킴에 따라 chemical shift의 변화와 적분값의 변화를 관찰하였다. t-Cinnamaldehyde(7.1429 mg/ml)를 19, 25, 30, 40 및 $50^{\circ}C$ 하에서 $^1H-NMR$ 측정한 결과, aldehyde methine signal(doublet)의 chemical shift가 9.7202, 9.7184, 9.7169, 9.7142 및 9.7124 ppm에서 관측되었다. 이는 측정온도는 signal의 chemical shift의 변화에 중요한 변수가 되지 않는다는 것을 의미하였다. 또한, aldehyde signal의 적분값이 $1.37(19^{\circ}C),\;1.37(25^{\circ}C),\;1.37(30^{\circ}C),\;1.37(40^{\circ}C)$$1.37(50^{\circ}C)$로써, 측정온도가 signal의 적분값에는 전혀 영향을 미치지 않는 것으로 나타났다. 동일한 온도 $25^{\circ}C$에서 0.4464, 0.8929, 1.7857, 3.5714, 7.1429 및 14.286 mg/ml의 농도의 시료에 대한 $^1H-NMR$ 측정 결과, aldehyde기의 chemical shifts는 각각 9.7206, 9.7201, 9.7196, 9.7192, 9.7185 및 9.7174 ppm에서 나타났다. 이는 각 시료의 농도가 증가함에 따라서 aldehyde의 signal이 고자장으로 약간 이동하는 것으로 나타났다. Aldehyde기의 doublet methine signal의 적분값과 각 시료의 농도에 따른 calibration curve는 직선으로 나타났으며, 매우 높은 회귀율($r^2=1.0000$)을 보였다. t-Cinnamaldehyde와 aldehyde기를 갖는 물질로써, C. cassia의 또 다른 구성성분인 t-2-methoxycinnamaldehyde($7.1429\;mg/ml\;CDCl_3,\;25^{\circ}C$)에 대해서, $^1H-NMR$ 스펙트럼을 측정한 결과, t-cinnamaldehyde는 ${\delta}_H$ 9.7174(9.7078, 9.7270)서 관측되었다. t-2-Methoxycinnamaldehyde는 ${\delta}_H$ 9.6936(9.6839, 9.7032)에서 관측되었다. 따라서, 두 화합물의 chemical shift의 차이는 resolution 값이 0.45 Hz인 NMR 스펙트럼 상에서 충분히 구분할 수 있을 정도로 나타났다. 위의 방법을 이용하여, 추출용매에 따른 C. cassia 내의 t-cinnamaldehyde의 함량을 분석한 결과, n-hexane, $CHCl_3$ 및 EtOAc로 추출하였을 때에, 각각 94.2 mg/g(0.94%), 137.6 mg/g(1.38%), 140.1 mg/g(1.40%)으로 결정되었다.

극초음속 공기반응의 수치해석적 특성과 부분 내재적 적분법 적용 (Numerical Characteristics of Hypersonic Air Chemistry and Application of Partially Implicit Time Integration Method)

  • 김성룡;옥호남;라승호;김인선
    • 한국항공우주학회지
    • /
    • 제31권7호
    • /
    • pp.1-8
    • /
    • 2003
  • 본 논문은 극초음속 유동과 공력가열 해석에서 나타나는 공기 반응의 수치해석적 특징을 다루고 공기반응을 효율적으로 해석하는 부분 내재적 적분법을 공기반응에 적용하였다. 안정적 계산을 위해 화학반응 자코비안이 필수적임을 밝혔으며 자코비안의 양의 실수 특성치로 인한 수치기법의 경직성은 일반적인 연소반응에 비하여 미약하였다. 공기반응에서 부분 내재적 적분법은 화학종 순서의 종속성이 없었으며 완전 내재적 적분법과 동일한 수렴율과 계산 결과를 보였다. 극초음속 유동해석에 부분 내재적 적분법을 적용하면 전체 연산 시간이 감소되었다.