• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2008

In this study, the microsphere silicone polymer beads were synthesized by UV irradiation and alkoxy hydrolysis. The coefficient of variation (CV) of microsphere silicone polymer beads were decreased with increasing UV intensity, reaction time. The mean particle diameter, refractive index, and pH value were $4.1{\mu}m$, 1.43 and 7.5, respectively. Also, the true and bulk specific gravity, moisture content were 1.30, and 0.40, below 2%. The mean particle diameter and CV were the lowest at 0.1 wt% hexamethyldisilazane (HMDS) and their roundnesses were $0.95{\sim}0.98{\mu}m$ values. The particle dispersion index of microsphere silicone polymer beads was 4.92 at 450 W, 90 min and the yield was increased to 11.3% at 20 wt% methyltrimethoxysilane (MTMS). The mean particle diameter was decreased with increasing the stirring rate and reaction temperature.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.204-210
• /
• 2005

We describe a colorless, transparent polyimide films for plastic display substrate which should have heat resistance, roll-to-roll processability and low CTE (coefficient of thermal expansion) property. Colorless polyimides were synthesized from 3,3',4,4'-oxydiphthalic anhydride (ODPA) 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and diamines such as sulfonyldianiline, aminophenoxybenzene (TPE-p, TPE-q, TPE-r) and bis[4-(3-aminophen oxy)phenyl] sulfone (m-BAPS). Their optical properties were measured by UV spectrophotometer, colormeter and hazemeter. We prepared polyimide/organophilic layered silicate nanocomposite to improve dimension stability. These colorless polyimide films showed UV transmittance by the level upper $89\%$, at 440 nm and excellent optical property having the value under yellow index (YI)=7. In addition, polyimide nanocomposite films also showed an improvement of CTE value as decreased according to the amount of layered silicate contents.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.119-126
• /
• 2012

Purpose: To study changes in coating and lens materials after chemically etched different polymer based glass lenses in short-term and ambient condition using hydrofluoric acid. Methods: Vinyl ester polymer (Lens A) and thiourethane polymer (Lens B), both dyed in gray 70%, were etched in hydrofluoric acid solution for 5, 10, or 15 min. The mechanical properties, degrees of damages in hard coating, anti-reflection coating, and other coatings, rates of refractive index and light transmission of both polymer types were evaluated. Results: Rates of refractive index of both lens types were not changed significantly after chemical etching. However, anti-reflection coatings and hard coatings were removed and lens surfaces were damaged. As a results, UV light transmission of lenses increased and mechanical properties decreased. Chemical etching notably changed various properties of thiourethane polymer materials. Conclusions: Depending on types of polymer materials, chemical reactions by hydrofluoric acid were dissimilar. Thus, various properties of les materials were altered differently.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.1
• /
• pp.25-32
• /
• 2002

Two PU flame-retardant coatings, 2,3-DBPO/N-l00 (DBPON) and 2,3-DBPO/IL (DBPOI), were prepared by curing 2,3-dibromo modified polyester (2,3-DBPO) with isocyanate curing agent Desmodur N-l00 (or Desmodur IL) at room temperature. The physical properties and flame-retardancy of the two coatings were tested and compared. As a result, the pot-life, yellowness index, lightness index difference, $60^{\circ}$ specular gloss, cross-hatch adhesion, viscosity, and accelerated weathering resistance of DBPON were better than those of DBPOI; the fineness of grind of the two coatings were the same; and the drying time, hardness, and abrasion resistance of DBPOI were better than those of DBPON. The flame retardancy of the flame-retardant coatings increased with the content of the flame retarding component, 2,3-dibromopropanoic acid (2,3-DBP); and the LOI values of the two coatings were in a range of $27{\sim}29%$ when the content of 2,3-DBP was 30wt%.

• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.56-65
• /
• 1997

Chemical analysis, statistical analysis and geochemical study were carried out to investigate the influence of the geology on the chemical characferistics of the mineral water in Taegu area. A simple comparision between the chemical components of the mineral water and their bedrocks indicates that the bedrock types in the catchmerit area control the chemical characteristics of the surface water. However more objective evidences for the mineral water-bedrock relationship come from the statistical analyses(cluster analysis and factor analysis). The results of the statistical analyses suggest that the bedrock type factor explains the data variation seven times as much as pollution does, which evidently indicates that the bedrock in the study area mainly control the mineral water chemistries. The results of comparision of the statistical analyses results with the mineral weathering reactions and mineral stability diagrams can be summarized as follows: 1. Plagioclase weathering to kaolinite provides SiO$_2$ , Ca$^{2+}$ and Na$^+$, and muscovite weathering to kaolinite provides K$^+$, and amphibole and mica minerals weathering to kaolinite provides F to the mineral water. Most of Ca$^{2+}$ and Mg$^{2+}$ in the mineral water are the products of carbonate mineral dissolution. SO$_4^{2-}$ may be the byproduct of sulfide oxidation. 2. The weatering of silicate mineral produces Ca-rich smectite and kaolinite, but Ca-rich smectite is unstable and will be transformed to more stable kaolinite because of the continuous dilution of the mineral water by precipitation. By Hashimoto's Mineral Balance Index, S-10 and S-12 mineral spring water were evaluated tasty and healthy water, S-9 and S-11 mineral spring water were evaluated tasty water and S-7, S-8 and S-13 mineral spring water were evaluated healthy water.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.84-87
• /
• 2001

A demand for the aggregates is increasing in the field of civil and architectural industry and so on. In these industries, the particle size and shape of aggregates are important factors and especially spherical or rounded particles are desired. In Japan, waste glass is used as one of the aggregate materials for the pavement or the construction. In this study based on the frictional action of material on each other, an autogenous grinding of silica glass with a stirred mill were carried out in order to eliminate flakelike or squarish particles and get spherical or rounded ones for aggregate materials. The autogenous grinding experiments were conducted by applying loads to the particle layer of silica glass. The particle shape was evaluated by the shape index, N/T and the degree of circularity, Ψ$_{ci}$ . The unfractured particles (20~13mm) were evaluated by N/T and Ψ$_{ci}$ , and the products (finer than 10${\mu}{\textrm}{m}$) by Ψ$_{ci}$ . As a result, N/T of the unfractured particles decreased with an increase of grinding time. Ψ$_{ci}$ of the unfractured particles and the products increased with an increase of grinding time (; progress of grinding), and became almost constant in the long time grinding. These tendencies were not changed by the applied load on the particle layer, but the limit value of Ψ$_{ci}$ at the products were varied with the applied load.plied load.

• Journal of Korean Society on Water Environment
• /
• v.36 no.1
• /
• pp.1-13
• /
• 2020

The purpose of this study was to investigate the thermal and chemical stratification in Lake Paldang 2013-2018 weekly using Schmidt's stability index (SSI) and the index of chemical stratification (IC-i). The annual average for SSI was 19.1 g cm/㎠ with the maximum value of 45.3 g cm/㎠ in the summer and the minimum value of 4.8 g cm/㎠ in fall-winter showing seasonal differences as well as increased vertical mixing in the summer. The lake stability increased higher in 2016 as compared with the other period. The most influential factors of thermal stratification were temperature and heavy rainfall. Especially, high water temperature and a prolonged residence duration caused by reduced rainfall and inflows could result in an increase of the stratification period. While decreasing inflow and outflow at the end of the rainfall, the thermal stratification was restrengthened within 7-14 days, and then stabilized rapidly before the rainfall. IC-DO increased with high air temperature in the spring and fall-winter. However increasing sunshine duration and residence time and decreasing rate of outflow caused an increase of IC-DO in the summer. Rainfall (less than 800 mm/year) and discharge (less than 200 CMS) significantly declined in 2015 resulting in IC-DO (0.77) increased more than three times over the other years and bottom water hypoxia occurred. The SSI and IC-i used in this study could be applied to other lakes to understand changes in stratification and mixing dynamics.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.185-191
• /
• 1991

The chemical composition and characteristics of the source rock collected from Dolgorae-1 well in Korea continental shelf block VI( $35^{\circ}$ 18'N.L., $130^{\circ}$ 28'E) have been investigated. An oil show analyzer(OSA) has been used to determine the contents of gas, oil and total organic carbon(TOC). The average TOC value for the sample is found to be 0.59%. The OSA has also provided hydrogen index and $T_{max}$, the maximum temperature which generate maximum hydrocarbons from kerogen. From a $T_{max}$-hydrogen index diagram the type of organic matter in the source rock was estimated to be type III kerogen. The content of bitumen and its molecular weight have been determined by means of extraction method and gel permeation chromatograph, respectively. The physicochemical properties has been studied using X-ray diffraction spectrometer, IR spectrometer and thermogravimetric method. On the basis of the results obtained in the present work, the samples collected from Dolgorae-1 well are evaluated to be poor source rocks.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.822-828
• /
• 2001

Bayer process is based on the extraction of aluminium trihydroxide from bauxite. The process is operated with the several criteria such as primary crystal size, particle size distribution and yield etc.. In this study basing on the previous results, an investigation on the effect of chemical grade and smelting grade aluminium trihydroxide precipitation condition were undertaken. As a result, particle size was 42∼44${\mu}$m form chemical grade product and 74∼77${\mu}$m for smelting grade product. The yield and solubility by acid of chemical grade product was higher than smelting grade product. The attrition index of smelting grade product was lower than that of other commercial product because primary crystal size of the smelting grade product was small.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.47-51
• /
• 2011

In this study, illite, an environmental friendly, low cost, and high aspect ratio additive, was used to improve flame retardant property of epoxy and it was fluorinated to enhance dispersion of hydrophilic illite in hydrophobic epoxy by introducing hydrophobic functional groups. Fluorination of illite enhanced illite dispersion ill epoxy solution before curing and that in the complex after curing. These enhanced dispersions were attributed to the increased affinity of illite to hydrophobic epoxy solution induced by fluorination of illite and the increased intercalation of epoxy polymer or exfoliation of illite by epoxy curing. Hence, limited oxygen index(LOI) of fluorinated illite/epoxy complex increased by 24%, compared to that of epoxy, suggesting that the preparation of fluorinated illite/epoxy complex increased their flame retardant properties.