Abstract
Purpose: To study changes in coating and lens materials after chemically etched different polymer based glass lenses in short-term and ambient condition using hydrofluoric acid. Methods: Vinyl ester polymer (Lens A) and thiourethane polymer (Lens B), both dyed in gray 70%, were etched in hydrofluoric acid solution for 5, 10, or 15 min. The mechanical properties, degrees of damages in hard coating, anti-reflection coating, and other coatings, rates of refractive index and light transmission of both polymer types were evaluated. Results: Rates of refractive index of both lens types were not changed significantly after chemical etching. However, anti-reflection coatings and hard coatings were removed and lens surfaces were damaged. As a results, UV light transmission of lenses increased and mechanical properties decreased. Chemical etching notably changed various properties of thiourethane polymer materials. Conclusions: Depending on types of polymer materials, chemical reactions by hydrofluoric acid were dissimilar. Thus, various properties of les materials were altered differently.
목적: 안경 렌즈 코팅 막을 불화수소산을 이용하여 상온에서 단시간 화학적으로 식각한 뒤 코팅 막과 렌즈 원재료의 변화를 살펴보고자 하였다. 방법: GRAY 70%로 염색된 vinyl ester계 고분자(Lens A)와 thiourethane계 고분자렌즈(Lens B)를 불화수소산을 이용해 5분, 10분 또는 15분 동안 식각한 뒤 재료의 기계적 물성과 하드코팅과 반사방지코팅 등 코팅 막의 손상 정도, 그리고 굴절률 광투과율 등 렌즈의 특성 변화를 관찰하였다. 결과: 두 재료 모두 식각 전과 후의 굴절력에는 큰 변화가 없었지만 반사방지코팅과 하드코팅이 차례로 제거되었고 렌즈 표면에도 손상을 주어 UV 투과율이 증가되었으며 기계적 물성은 소하였다. 화학적 식각으로 인한 렌즈의 물성 변화는 thiourethane계 고분자 렌즈에서 더 크게 나타났다. 결론: 고분자 재료의 특성에 따라 불화수소산에 대한 반응성이 다르기 때문에 식각에 따른 렌즈 자체의 물성 변화가 다르게 나타남을 알 수 있었다.