• ALGAE
• /
• 제21권4호
• /
• pp.479-483
• /
• 2006

In preparation of the biological samples for electron microscopy, the chemical fixation by glutaraldehyde, paraformaldehyde, and OsO4 has been generally used for a long time. However, the chemical fixation method has some problems: the infiltration time is a little bit long and the ultrastructure of cell or tissue transforms before complete fixation of sample. So, recently, cryo-fixation is considered more often in biomedical field. In this study, we compared High Pressure Freezing (HPF) method with chemical fixation method using a algal sample (Ptilota filicina J. Agardh), which was difficult to fix using chemical fixation method. In chloroplast, the ultrastructure of thylakoid lamella and phycobilisome can not show clearly by chemical fixation. In this study we could observe the ultrastructure of thylakoid lamella and phycobilisome of chloroplast very clearly using HPF fixation. An improved images of ultrastructures of nucleus, mitochondrion and floridean starch could obtain. These results suggest that HPF method is very useful method in algal specimen for electron microscopy.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권6호
• /
• pp.484-488
• /
• 2006

Alteration of illumination with optimum carbon dioxide fixation-based curve in this research successfully enhanced the $CO_{2}-fixation\;(q_CO_{2}$ capability of Chlorella vulgaris Buitenzorg cultivated in a bubble column photo bioreactor. The level of $CO_{2}$ fixation was up to 1.91 times that observed from cultivation with intensification of illumination on an optimum growth-based curve. During 144 h of cultivation, alteration of light intensity on an optimum $CO_{2}-fixation-based$ curve produced a $q_CO_{2}$ of $12.8\;h^{-1}$. Meanwhile, alteration of light intensity with a growth-based curve only produced a $q_CO_{2}$ of $6.68\;h^{-1}$. Increases in light intensity based on a curve of optimum $CO_{2}-fixation$ produced a final cell concentration of about 5.78 g/L. Both cultivation methods were carried out under ambient pressure at a temperature of $29^{\circ}C$ with a superficial gas velocity of $2.4\;m/h(U_{G}$. Cells were grown on Beneck medium in a 1.0 L Bubble Column Photo bioreactor illuminated by a Phillips Halogen Lamp (20 W/12 V/50 Hz). The inlet gas had a carbon dioxide content of 10%.

• 대한의생명과학회지
• /
• 제13권4호
• /
• pp.361-368
• /
• 2007

Biological samples can be fixed either by chemical method by using chemical solution or physical methods by using heat treatment. The problem in traditional heat fixation is unsatisfactory quality due to uneven heat conduction in specimen and loss of inner cell contents. Chemical fixation method also bears several intrinsic problems like the limit in specimen size, time consumption in fixative impregnation, and loss of low molecular weight cell components. These factors deteriorate the quality of fixed specimen, thus limit the magnification and contrast of tissue pictures. Microwave heat has been reported to be a good alternative to current chemical methods to overcome these problem. In this study, we tried to introduce the microwave energy method to routine fixation work in hospital. We replaced chemical fixative with saline to provide moderate reaction condition, and used frozen section to reduce time for sample preparation. Temperature was measured at each experiment. The fixation of rat kidney tissue with 2.45 GHz electromagnetic wave and saline showed similar result to the control group fixed with traditional chemical method. Human tumor tissue fixed with 2.45 GHz electromagnetic in frozen section was improved in terms of histochemistry of PAS and immunohistochemistry of tumor marker like cytokeratin. Total turnaround time was reduced from $24\sim38$ h to to $2\sim4$ h. In conclusion, the quality of samples prepared by microwave heating method was at least as good as that of traditional method. If the condition for the fixation of different specimens is standardized, this new method could be applied to routine work in hospital, and could save working time as well.

• Macromolecular Research
• /
• 제16권4호
• /
• pp.373-378
• /
• 2008

A simple chemical fixation method for the fabrication of layer-by-layer (LbL) polyelectrolyte multilayer (PEM) has been developed to create a large area, highly uniform film for various applications. PEM of weak poly-electrolytes, i.e., polyallylamine hydrogen chloride (PAH) and poly(acrylic acid)(PAA), was assembled on polymer substrates such as poly(methyl methacrylate)(PMMA) and polycarbonate (PC). In the case of a weak polyelectrolyte, the fabricated thin film thickness of the polyelectrolyte multilayers was strongly dependent on the pH of the processing solution, which enabled the film thickness or optical properties to be controlled. On the other hand, the environmental stability for device application was poor. In this study, we utilized the chemical fixation method using glutaraldehyde (GA)-amine reaction in order to stabilize the polyelectrolyte multilayers. By simple treatment of GA on the PEM film, the inherent morphology was fixed and the adhesion and mechanical strength were improved. Both surface tension and FT-IR measurements supported the chemical cross-linking reaction. The surface property of the polyelectrolyte films was altered and converted from hydrophilic to hydrophobic by chemical modification. The possible application to antireflection coating on PMMA and PC was demonstrated.

• Applied Microscopy
• /
• 제50권
• /
• pp.10.1-10.6
• /
• 2020

Plant specimens for scanning electron microscopy (SEM) are commonly treated using standard protocols. Conventional fixatives consist of toxic chemicals such as glutaraldehyde, paraformaldehyde, and osmium tetroxide. In 1996, methanol fixation was reported as a rapid alternative to the standard protocols. If specimens are immersed in methanol for 30 s or longer and critical-point dried, they appear to be comparable in preservation quality to those treated with the chemical fixatives. A modified version that consists of methanol fixation and ethanol dehydration was effective at preserving the tissue morphology and dimensions. These solvent-based fixation and dehydration protocols are regarded as rapid and simple alternatives to standard protocols for SEM of plants.

• Applied Microscopy
• /
• 제37권3호
• /
• pp.175-183
• /
• 2007

정확한 세포의 구조 분석을 위해서는 조직을 가능한 한 자연 상태 그대로 보존하는 것이 무엇보다 중요하다. 그러나 지금까지 이용되고 있는 화학적인 고정방법은 조직의 변형을 유도하는 것으로 알려져 그 해결방법에 관한 연구가 활발히 진행되고 있다. 그 연구의 결과로 현재 급속 동결법이 제시되었고, 그 중 초고압동결법(high-pressure freezing method)는 가용 두께가 $200{\mu}m$로서 $10{\sim}15{\mu}m$정도인 침윤동결법(plunging method) 혹은 접촉동결법 (slamming method)보다 우수한 방법으로 보고되고 있다. 본 연구팀에는 노랑초파리(Drosophila melanogaster)의 레티나를 화학고정법과 고압동결법으로 고정하여 미세구조를 비교하였다. 먼저 120kV 전자현미경을 이용하여 각 세포 소기관을 비교하였고, 그 중 미토콘드리아의 형태변화를 좀 더 자세히 비교하기 위하여 초고압전자현미경을 이용하였다. 그 결과 급속동결 세포의 세포막과 미토콘드리아의 고정에서 특히 차이가 있음을 알 수 있었고, 이는 주로 탈수에 의한 구조변형 때문인 것으로 추측된다.

• Bulletin of the Korean Chemical Society
• /
• 제23권7호
• /
• pp.1027-1028
• /
• 2002

• KSBB Journal
• /
• 제14권6호
• /
• pp.742-746
• /
• 1999

새로운 형태의 내부조사형 광생물반응기에서 Chlorella sp. HA-1의 이산화탄소 고정화 특성을 살펴보았다. 높은 이산화탄소 농도에서 균체를 적응시켜 10%와 20%(v/v) 이산화탄소 농도 모두에서 내성을 가지도록 하였다. 그리고 조도, 초기균체농도, pH 등을 조절하여 이산화탄소 고정화양, 372 $gCO_2/m^2{\cdot}day$을 얻었다. 또한 장시간 동안 지속적으로 배출되는 이산화탄소를 제거하기 위한 운전 방법으로 반연속식 배양방법을 사용하여 희석비를 0.1씩 증가시켰을 때 각 단계마다 균체성장속도를 일정하게 유지하는 결과를 얻었다.

• Journal of Microbiology and Biotechnology
• /
• 제15권3호
• /
• pp.461-465
• /
• 2005

Characteristics of biological $CO_2$ fixation by Chlorella sp. HA-1 were investigated in a semi-continuous and series reactor system using an internally illuminated photobioreactor to overcome shortcomings of physicochemical technologies such as adsorption and membrane separation. High $CO_2$ fixation rate was achieved in the semi-continuous reactor system, in which the dilution ratios of the culture medium were controlled. The average $CO_2$ fixation rate was maintained almost constantly when the dilution ratio increased by 0.1 increment from the initial value of 0.5. The total removal efficiency of $CO_2$ was enhanced by employing a series reactor system. The average $CO_2$ fixation rate increased until 4.013 g $CO_2\;day^{-1}$ in a series operation of four reactors, compared to 0.986 g $CO_2\;day^{-1}$ in a batch operation mode. The total $CO_2$ fixation rate was proportional to the number of reactors used in the series reactor system. In the series reactor system of semi-continuous operation, a large amount of $CO_2$ was removed continuously for 30 days. These results showed that the present reactor systems are efficient and economically feasible for a biological $CO_2$ fixation.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1996년도 경북지부 결성 및 추계학술발표회 논문집
• /
• pp.81-87
• /
• 1996