• Journal of Korean Society on Water Environment
• /
• 제30권1호
• /
• pp.1-7
• /
• 2014

The purpose of this study was to investigate the nitrification characteristics of biological aerated filter (BAF) packed with ceramic media, especially focusing on nitrite build-up during nitrification. When increasing the nitrogen load above $1.63kgNH_4{^+}-N/m^3{\cdot}d$, ammonium removal efficiency decreased to less than 60% and the nitrite ratio ($NO_2{^-}-N/NO_x-N$) of higher than 75% was achieved due to the inhibitory free ammonia (FA, $NH_3-N$) concentration and oxygen limitation. FA inhibition, however, is not recommended strategy to promote nitrite build-up since FA concentration in the reactor is coupled with decreased ammonium removal efficiency. Nitrite ratio in the effluent was also affected by aeration rate and influent ammonium concentration. Ammonium oxidation was enhanced at a higher aeration rate regardless of influent ammonium concentration but, the nitrite ratio was dependent on both aeration rate and influent ammonium concentration. While a higher nitrite ratio was obtained when BAFs were fed with $50mgNH_4{^+}-N/L$ of influent, the nitrite ratio significantly decreased for a greater influent concentration of $200-300mgNH_4{^+}-N/L$. Taken together, aeration rate, influent ammonium concentration and FA concentrations kept in the BAF were found to be critical variables for nitrite accumulation in the BAF system.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.234-242
• /
• 2021

The demand for truck bus radial (TBR) tires with enhanced fuel efficiency and wear resistance have grown in recent years. In addition, as the issue of particulate matter and air pollution increases, efforts are being made to reduce the generation of particulate matter. In this study, the properties of epoxidized natural rubber (ENR) containing a silica-friendly functional group were evaluated by considering it as a base rubber and varying the silica ratio in this binary filler system. The results showed that the wear resistance of the NR/BR blend compound decreased as the silica ratio increased. In contrast, the ENR/BR blend compound exhibited an increase in wear resistance as the silica ratio was increased. In particular, the ENR-50/BR blend compound showed the best wear resistance due to the presence of several epoxide groups. Furthermore, we observed that for tan 𝛿 at 60℃, higher epoxide content resulted in the higher T_g of the rubber, indicating a higher tan 𝛿 at 60℃. On the other hand, it was confirmed that increasing the silica ratio decreased the value of tan 𝛿 at 60℃ in all compounds. In addition, we measured the amount of wear particulate matters generated from the compound wear. These measurements confirmed that in the binary filler system, regardless of the filler type, the quantity of the generated wear particulate matters as the filler-rubber interaction increased. In conclusion, the silica filled ENR/BR blend compound exhibited the lowest generation of wear particulate matters.

• Advances in aircraft and spacecraft science
• /
• 제1권3호
• /
• pp.273-289
• /
• 2014

Accuracy of a reconstruction technique assuming a constant characteristic exhaust velocity ($c^*$) efficiency for reducing hybrid rocket firing test data was examined experimentally. To avoid the difficulty arising from a number of complex chemical equilibrium calculations, a simple approximate expression of theoretical $c^*$ as a function of the oxidizer to fuel ratio (${\xi}$) and the chamber pressure was developed. A series of static firing tests with the same test conditions except burning duration revealed that the error in the calculated fuel consumption decreases with increasing firing duration, showing that the error mainly comes from the ignition and shutdown transients. The present reconstruction technique obtains ${\xi}$ by solving an equation between theoretical and experimental $c^*$ values. A difficulty arises when multiple solutions of ${\xi}$ exists. In the PMMA-LOX combination, a ${\xi}$ range of 0.6 to 1.0 corresponds to this case. The definition of $c^*$ efficiency necessary to be used in this reconstruction technique is different from a $c^*$ efficiency obtained by a general method. Because the $c^*$ efficiency obtained by average chamber pressure and ${\xi}$ includes the $c^*$ loss due to the ${\xi}$ shift, it can be below unity even when the combustion gas keeps complete mixing and chemical equilibrium during the entire period of a firing. Therefore, the $c^*$ efficiency obtained in the present reconstruction technique is superior to the $c^*$ efficiency obtained by the general method to evaluate the degree of completion of the mixing and chemical reaction in the combustion chamber.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1289-1294
• /
• 2010

Novel $H_8$-binaphthol-based chiral receptors appended with an uryl moiety (2a) and a guanidinium moiety (2b) have been designed and synthesized for the enantioselective recognition of 1,2-amino alcohols via reversible imine formation. The selectivities ($K_R/K_S$ = 9.8 ~ 19.4) of 2b in imine formation with 1,2-amino alcohols are higher than those of 2a ($K_R/K_S$ = 1.8 ~ 4.5). Similar efficiency trend have been observed in the conversion of L-amino acids to D-amino acids, i.e., the efficiency of the receptor 2b (D/L ratio: 4.3 ~ 10.1) is superior to 2a (D/L ratio: 4.0 ~ 8.7).

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제24권1호
• /
• pp.41-47
• /
• 1995

This experiments was designed to evaluated the chemical components and nutrition of Aspergillus fumigatus cells. This dried fungal mycellia was consist of crude protein 48.5%, crude lipid 2.9%, carbohydrate 44.7% and total ash 3.4%, respectively. The major fatty acid of total lipid were 27.9% of linoleic acid, 24.6% of oleic acid, 15.4% of palmitic acid and 10.6% of linolenic aicd. Amino acid analysis indicated that the protein was rich in aspartic acid, glutamic acid, leucine, lysine but poor in cystein, methionine, histidine. The fungal cake of Aspergillus fumigatus, when dried and specially processed, has been found to serve as a source of protein in place of soybean meal in the diet of experimental mice. Animal were fed a control diet first, and an incease in weight proved the formulation to be satisfactory. At the end of a 30-day period, the experimental mice showed increases in weight comparable to those of the control animals. The net protein efficiency ratio for the control diet was 3.42$\pm$0.15 and the fungal protein and succinylated fungal protein with DL-methionine they were 3.12$\pm$0.39 and 2.98$\pm$0.06 respectively. This supports the view that dried and succinylated fungal protein can be substituted as a protein source.

• Journal of Adhesion and Interface
• /
• 제25권1호
• /
• pp.152-156
• /
• 2024

We conducted research on a two-component epoxy adhesive material based on acid graft polyolefin using maleic anhydride to address the lack of formability due to epoxy adhesives' hard segments. To understand the graft efficiency according to reaction conditions, we conducted studies based on polyolefin molecular weight, initiator half-life, and initiator concentration for each process. The maleic anhydride grafted polyolefin produced was used as an adhesive material for aluminum and CPP film lamination after mixing with epoxy hardener. The graft efficiency in the solution process was approximately 30% superior to that in the melt process, and an increase in graft ratio confirmed an increase in peel strength.

• Preventive Nutrition and Food Science
• /
• 제5권3호
• /
• pp.177-178
• /
• 2000

Chemical and photochemical precesses during food storage an preparation rapidly degrade $\beta$-carotene, the most active form of carotenoids. We investigated the possibility of liposomes as tool to preserve $\beta$-carotene. Liposomes with $\beta$-carotene were prepared as multilamellar vesicles by using soybean phosphatidylcholine, in terms of the ratio of $\beta$-carotene to phospholipid and pH. Incorporated efficiency was 99.7% at 1:0.05 of phospholipid : $\beta$-carotene and at pH 9.0. As the concentration of $\beta$-carotene increased, the incorporated efficiency increased progressively. pH did not affect the incorporation efficiency greatly.

• Korean Journal of Organic Agriculture
• /
• 제20권3호
• /
• pp.357-368
• /
• 2012

This study was conducted to evaluate soil inorganic N concentrations and N uptake efficiency of sorghum ${\times}$ sudangrass hybrid (Sorghum bicolor (L.) Moench) as affected by organic nutrient sources from 2009 to 2011. The treatments included chemical fertilizer, compost, oilcake, alfalfa hay mulch, and control. Nutrient applications were made at rates equivalent to approximately 210 kg of actual N per hectare. The precipitation during the growth period from May to September was higher in 2011, followed by 2009, and 2010. Oilcake had the lowest C:N ratio in the raw materials. Compost treatment slowed N-mineralization rate in soil during the measured years. Soil mineral nutrition and dry matter production were not consistently affected by treatments, but the dry matter production was negatively correlated with the amount of precipitation from May to September for three years. Chemical fertilizer treatment increased N efficiency in plants in the first two years, observing with lower N efficiency in plants treated with compost for 3 years. Increased precipitation from June to August improved N efficiency in sudangrass plants treated with compost but reduced the efficiency with the chemical fertilizer. Total dry matter production and N efficiency in plants were not affected by the C:N ratio of the raw materials rather than weather condition.

• Applied Chemistry for Engineering
• /
• 제34권3호
• /
• pp.272-278
• /
• 2023

In this study, we analyzed the effects of current density and electroosmotic phenomena on the desalination performance of electrodialysis (ED). We conducted ED experiments under constant voltage conditions, changing the concentration of the concentrate solution from 10 to 200 g/L. During the ED operation, we measured the current density and charge supplied to the stack, the concentration of the diluted and concentrated solutions, and the amount of water transported by electroosmosis to analyze desalination performance. As the concentration of the concentrated solution increased, the selectivity of the ion exchange membrane decreased, resulting in a decrease in current efficiency. Moreover, the current efficiency was found to be influenced by the current density supplied. When the current density exceeded 15 mA/cm², back diffusion of ions was suppressed, leading to an increase in current efficiency. We also investigated the specific water transport by electroosmosis during the ED operation. We found that the amount of water transported increased proportionally to the concentration ratio of the concentrated and diluted solutions. When the concentration ratio exceeded 100, the specific water transport rapidly increased due to osmotic pressure, making it challenging to obtain a concentrated solution greater than 200 g/L.

• Journal of the Korean institute of surface engineering
• /
• 제49권5호
• /
• pp.447-453
• /
• 2016

In this study, we intended to extend the life of electropolishing solution through the reduction of electric resistance by improving the electrolysis efficiency. The optimum conditions were obtained by half round bus bar and Taguchi method. As the main control factors in the electropolishing process, current density, polishing time, electrolyte temperature and flow rate were selected. The electrolyte temperature was the most significant to the electrolysis efficiency. The optimum conditions for the life extension of electropolishing solution were as follows: current density, $45A/dm^2$; polishing time, 6 min; electrolyte temperature, $70^{\circ}C$; flow rate, 11 L/min. As a results of ANOVA of SN ratios, it was found that the electrolyte temperature was significant factor at the 90% confidence level.