• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.235-242
• /
• 2015

The objective of this study was to determine the effects of soluble potassium silicate by soil drenching application on watermelon growth, yield, and nutrient uptake. The potassium silicate rates were control (No potassium silicate), 1.63mM, 3.25mM, 6.50mM. The potassium silicate were treated 6 times (twice before fruit forming and 4 times after fruit forming per 7 day. Soil chemical properties, such as soil pH, EC, available phosphorus and silicate, exchangeable K, nitrate-N levels were increased after potassium silicate treatment, while the concentrations of soil organic matter, exchangeable Ca and Mg were similar to control. The growth characteristics of watermelon, such as stem diameter, fresh and dry weight of watermelon at harvest were thicker and heavier for increased potassium silicate treatment than the control, while number of node, and plant length were same for all treatments. With increased potassium silicate treatment, nutrient concentrations, such as P and K in the watermelon leaf at harvest were increased, N concentration in the leaf was decreased, and Ca and Mg concentrations in the leaf were same. Chlorophyll content was increased with increased potassium silicate application. The occurrence of powdery mildew was lower for the potassium silicate treatments than the control. Fresh watermelon weight for the potassium silicate treatments was 0.1 to 0.5kg per watermelon heavier than the control, sugar content was 0.5 to $0.6^{\circ}Brix$ higher than control, and merchantable watermelon was 2 to 4% increased compared to the control. These results suggest that potassium silicate application by soil drenching method in the greenhouse can improve watermelon nutrient uptake, merchantable watermelon and suppress the occurrence of powdery mildew.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.570-581
• /
• 2013

To improve productivity of aquaculture animals with management of culturing grounds, survey of mariculture management area in Ongjin-gun about water quality and sedimentary environment had been conducted on June, August and November in 2011. Water temperature in surface and bottom waters ranged from 9.49 to $24.14^{\circ}C$. Salinity and dissolved oxygen concentrations were in the range of 23.19~31.49 and 5.48~9.36 mg/L, respectively, depending on the variation of water temperature. The average concentration of COD was 1.57 mg/L and the concentrations of DIN and DIP showed entirely low level. As the result of grain size analysis, sand(56.66 %) and silt(34.60 %) were predominated. The Mz of sediment showed a variation of 2.59 to $6.62{\O}$ and sorting appeared to be poorly sorted. The concentrations of COD and IL in surface sediment ranged from 1.00 to $11.03mg/g{\cdot}dry$ and 0.72 to 5.29 %, respectively, which showed relatively good positive correlations. On the environmental assessment of trace metals in surface sediment, geoaccumulation index ($I_{geo}$) class indicated that sediments were not contaminated by most of metallic elements except Cr and As. Our result implies that this study area showed good water quality and sediments were not polluted by organic matters and metallic elements.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.30-40
• /
• 2009

Statistical optimization of the production medium was carried out in order to find an optimal medium composition in itaconic acid fermentation process. Itaconic acid utilized in the manufacture of various synthetic resins is a dicarboxylic acid biosynthesized by fungal cells of Aspergillus terreus in a branch of the TCA cycle via decarboxylation of cis-aconitate. Through OFAT (one factor at a time) experiments, six components (glucose, fructose, sucrose, soluble starch, soybean meal and cottonseed flour) were found to have significant effects on itaconic production among various carbon- and nitrogen-sources. Hence, using these six factors, interactive effects were investigated via fractional factorial design, showing that the initial concentrations of sucrose and cottonseed flour should be high for enhanced production of itaconic acid. Furthermore, through full factorial design (FFD) experiments, negative effects of $KH_2PO_4$ and $MgSO_4$ on itaconic acid biosynthesis were demonstrated, when excess amounts of the each component were initially added. Based on the FFD analysis, further statistical experiments were conducted along the steepest ascent path, followed by response surface method (RSM) in order to obtain optimal concentrations of the constituent nutrients. As a result, optimized concentrations of sucrose and cottonseed flour were found to be 90.4g/L and 53.8g/L respectively, with the corresponding production level of itaconic acid to be 4.36 g/L (about 7 fold higher productivity as compared to the previous production medium). From these experimental results, it was assumed that optimum ratio of the constituent carbon (sucrose) and nitrogen (cottonseed flour) sources was one of the most important factors for the enhanced production of itaconic acid.

• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.90-108
• /
• 2015

The WRF-Chem model was applied to simulate the Asian dust event affecting the Korean Peninsula from 11 to 13 November 2010. GOCART dust emission schemes, RADM2 chemical mechanism, and MADE/SORGAM aerosol scheme were adopted within the WRF-Chem model to predict dust aerosol concentrations. The results in the model simulations were identified by comparing with the weather maps, satellite images, monitoring data of $PM_{10}$ concentration, and LIDAR images. The model results showed a good agreement with the long-range transport from the dust source area such as Northeastern China and Mongolia to the Korean Peninsula. Comparison of the time series of $PM_{10}$ concentration measured at Backnungdo showed that the correlation coefficient was 0.736, and the root mean square error was $192.73{\mu}g/m^3$. The spatial distribution of $PM_{10}$ concentration using the WRF-Chem model was similar to that of the $PM_{2.5}$ which were about a half of $PM_{10}$. Also, they were much alike in those of the UM-ADAM model simulated by the Korean Meteorological Administration. Meanwhile, the spatial distributions of $PM_{10}$ concentrations during the Asian dust events had relevance to those of both the wind speed of u component ($ms^{-1}$) and the PBL height (m). We performed a regressive analysis between $PM_{10}$ concentrations and two meteorological variables (u component and PBL) in the strong dust event in autumn (CASE 1, on 11 to 23 March 2010) and the weak dust event in spring (CASE 2, on 19 to 20 March 2011), respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.398-405
• /
• 2012

PAHs(Polycyclic Aromatic Hydrocarbons) in coastal area and estuary adjacent to urban area and industrial activities region are mainly introduced into marine environment via atmosphere and river. This study which is evaluated the distribution characteristics of PAHs discharge from rivers and sewage disposal water which flowing into Ulsan bay, and were carried out in Jun of dry season and in Auguest of wet season, 2008. The water samples from eight main rivers and Youngyeon WWTP(Wastewater Treatment Plant) flowed into Ulsan bay were taken for analysis of dissolved PAHs. The range and mean values of dissolved PAHs concentrations showed 10.30 to 87.88 ng/L, its mean 36.94 ng/L in dry season and 10.30 to 69.57 ng/L, its mean 24.37 ng/L in wet season. The distribution of dissolved PAHs showd the high concentrations in the Gungcheoncheon which is flowed from urban and industrial area. The ranges and means values of the loading fluxes were estimated with 0.04 to 8.27 g/day, its mean 2.05 g/day in dry season, and 0.03 to 4.77 g/day, its mean 1.61 g/day, in wet season. The loading flux showed the highest value in Taewha river due to the high flow rate and the urban activity. The composition patterns of dissolved PAHs compound showed most of the trend occupying low molecuar weight PAHs than high molecular weight PAHs. These results were due to physical and chemical characteristics of PAHs compound, and were similar to those of other studies. The concentrations of dissolved PAHs in this study are lower than those of other studies, and the level of PAHs pollution appeared to be not serious in reverine waters of Ulsan coast.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.6
• /
• pp.812-813
• /
• 1995

Lactococcal cells are nutritionally fastidious and thus, generally cultured either in milk or M17 medium (Terzaghi and Sandine, 1975). In this study, Lactococcus cremoris wild-type (KH) and its less­proteolytic mutant (KHA1) cells were grown on the M17 medium or with modified M17 medium by replicated parallel experiments. The modified M17 medium had the same composition as M17 medium, except that lactose was replaced by glucose. Analyses of culture-broth samples, in which the M17 and the modified M17 media were used, were conducted by high-performance liquid chromatography (HPLC). But, working with these media created noisy problems in analyses of samples. Therefore, a new semi-synthetic medium was developed on the basis of nutritional requirements (Morishita et al., 1981). The composition of the semi-synthetic medium determined on the basis of the nutritional requirements and the composition of milk, is presented in Table 1. The composition of M17 medium is also presented and compared in the table. L. cremoris KH and KHA1 cells were grown again on the new synthetic medium containing glucose or lactose. The broth samples were then drawn and analyzed by HPLC. Clearer separations of fermented products were achieved from the new medium than those with the M17 and the modified M17 media. In comparison with the M17 or the modified M17 media, growth on the new medium was good (Kim et al, 1993). Additional fermentations were also carried out at a controlled pH of 7.0, where enhanced growth of lactococcal cells was obtained. In the fermentations, samples were also analyzed for the concentrations of sugar and lactic acid. The results showed that the new synthetic medium was as good as or better than the M 17 and the modified M 17 media. This is because casein hydrolysate in the synthetic medium provided a ready supply of amino acids and peptides for L. cremoris KH and KHA1 cells. Lactic acid bacteria (LAB) including Lactococcal cells have been known to be an effective means of preserving foods, at the same time as giving particular tastes in fields of dairy products. LAB also have always occupied an important place in the technology of sea products, and marine LAB have known to be present in traditional fermented products (Ohhira et al, 1988). To apply the new synthetic medium to marine LAB, two different LAB were isolated from pickled anchovy and pollacks caviar and were grown on the new media in which various concentrations of NaCl $(3, 5, 7 and 10\%)$ added. They were also grown on the medium solution in natural seawater $(35\%o\;salinity)$ and on the solution of natural seawater itself, too. As seen in Fig. 1, Marine LAB were grown best on the synthetic medium solution in natural seawater and the higher concentrations of NaCl were added to the medium, the longer lag-phase of growth profile appeared. Marine LAB in natural seawater were not grown well. From these results, the synthetic medium seems good to cultivate cells which are essential to get salted fish aged. In this study, it showed that the new synthetic medium provided adequate nutrition for L. cremoris KH and KHA1 cells, which have been used as cheese starters (Stadhouders et al, 1988). Using this new medium, the acid production capability of starter cultures could be also measured quantitatively. Thus, this new medium was inferior to the M17 or the modified M17 medium in culturing the cheese starters and in measuring fermentation characteristics of the starter cells. Moreover, this new medium found to be good for selected and well-identified marine LAB which are used in rapid fermentations of low-salted fish.

• Journal of Korean Society on Water Environment
• /
• v.31 no.6
• /
• pp.599-609
• /
• 2015

In order to investigate why OSA (oxic-settling-anaerobic) process produces less sludge than CAS (conventional activated sludge) process, sequential cultivation through 1^st aerobic-anaerobic-2^nd aerobic conditions, were carried out. Then, the intracellular concentrations of adenosine triphosphate (ATP), nicotinamide adenine dinucleotide (NAD and NADH), and nicotinamide adenine dinucleotide phosphate (NADP and NADPH) were monitored for these three stages. Results showed that the concentrations of these energy substances rapidly decreased through time in both aerobic and anaerobic conditions but the anaerobic culture contained the lower energy level than aerobic culture. The 2^nd aerobic culture that experienced anaerobic condition showed lower concentration of these energy substances than those of the 1^st aerobic culture. Meanwhile, the anaerobic culture corresponding to the sludge holding stage of OSA was subjected to different soluble chemical oxygen demand (SCOD) levels, detention time, and temperature to evaluate the effects of these variations on the energy level difference between the 1^st and 2^nd aerobic stages. The lower the SCOD concentration, the longer detention time; and the higher temperature in the anaerobic stage tended to further reduce the intracellular level of the 2^nd aerobic culture. On the average, the intracellular energy level of the anaerobic and 2^nd aerobic stage were 57.73% and 39.12% of the 1st aerobic culture, respectively. These indicated that the insertion of an anaerobic stage between two aerobic stages could lower the intracellular energy levels, hence the lower the sludge in OSA than CAS process. Moreover, manipulation of the operating conditions of the intervening anaerobic stage can change intracellular energy levels thereby controlling sludge production.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.203-215
• /
• 2006

Field observations on the spatio-temporal distribution of organic matter of the surface sediment were carried out at 15 stations in the central parts of the South Sea of Korea from April 2002 to January 2003. The range of water temperature and salinity in bottom waters, mud content and water content of surface sediment were $8.06{\sim}23.35^{\circ}C,\;29.20{\sim}34.51\;psu,\;71.2{\sim}99.9%$ and $38.7{\sim}68.9%$, respectively. Measured parameters on the surface sediments of ignition loss (IL), chemical oxygen demand (CODs), phaeopigment, particulate organic carbon (POC) and particulate organic nitrogen (PON) also ranged in $3.9{\sim}l2.5%,\;9.60{\sim}44.05\;mgO_2/g-dry,\;1.58{\sim}29.51\;{\mu}g/g-dry,\;3.12{\sim}13.01\;mgC/g-dry$ and $0.49{\sim}2.00\;mgN/g-dry$, respectively. The spatio-temporal distribution of organic matter demonstrated higher concentrations offshore than at lesions near the coastal line. Higher concentrations occurred in the summer and spring. The results indicated that the origin of organic matter in surface sediments in the central part of the South Sea was autochthonous rather than allocthonous because the organic matter had an average C/N ratio of 6.44 (${\pm}0.51$). However, the composition of autochthonous organic matter was mainly derived from detritus rather than living phytoplankton, which was Indicated by the results of the POC/phaeopigment ratio. A principal component analysis (PCA) indicated that 73.2% of the variability in the data was described by two factors: 1) an 'environmental factor concerning the accumulation of materials (57.3%)' and 2) 'origin of organic matter and the composition by primary production (15.9%)'. The sedimentary environment in the central part of the South Sea was divided into four regions from the factor score of the PCA by the concentrations of organic matter and the composition ratio of organic matters from phytoplankton in surface sediments.

• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.23-30
• /
• 2008

In this paper, when the silk fabric was modified by ethylene cyanohydrine, the reaction mechanism between both was studied at various treatment conditions such as curing temperatures and times, ethylene cyanohydrin concentrations and $ZnCl_2$ concentrations. Through the FT-IR and DSC analyses of the treated silk fabrics, we found the results as follows : It was observed in FT-IR analysis of the treated silk fabrics that the -OH characteristic peak($3,450cm^{-1}$)position and shape were all changed when drying and curing treatment conditions were at $80^{\circ}C$ for 3 minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the $ZnCl_2$ was 0.1%. It indicated that the -OH group of the silk participated in the reaction between the silk fabric and ethylene cyanohydrin. From the DSC analysis, it was found that the pyrolysis temperatures of the treated silk fabrics by ethylene cyanohydrin which was processed in the same condition, were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$. From the FT-IR analyses of the silk fabrics treated by ethylene cyanohydrin at the various concentrations of $ZnCl_2$, it was found that the -OH characteristic peaks($3,450cm^{-1}$) were similar to the nontreated one except that of the fabric treated at the $ZnCl_2$ conconcentration of 0.8% when drying and curing treatment conditions were at $80^{\circ}C$ for 3minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the ethylene cyanohydrin was 5%. In the case of the $ZnCl_2$ concentration of 0.8% solution, a lot of change were observed in peak. From the DSC analysis of the treated silk fabrics which was processed in the same condition, it was showed that the pyrolysis temperatures of treated silk fabric were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$, which was no relation with the concentration of $ZnCl_2$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.3
• /
• pp.119-126
• /
• 2003

Nitrate-N concentrations and the corresponding ${\delta}^{15}N$ values were determined with water samples collected periodically from artesian wells (3 and 6 m deep), underdrainage and gushout waters in a Welsh onion cultivated area in the Kushibiki Fan, Saitama Prefecture, Japan. Average $NO_3-N$ concentrations in waters from 3 and 6 m wells were 25.7 and $2.8mg\;L^{-1}$, whereas ${\delta}^{15}N$ values were 3.6 and 4.7‰, respectively. The $NO_3-N$ concentration and ${\delta}^{15}N$ value of the underdrainge water were $35.5mg\;L^{-1}$ and 6.6‰, reflecting rapid input of chemical fertilizers and farmyard manure. The mean values of $NO_3-N$ concentration and ${\delta}^{15}N$ in the gushout water flown out of the edge of Kushibiki Fan were $19.4mg\;L^{-1}$ and 7.9‰, respectively. As a results the ${\delta}^{15}N$ values of the gushout water were higher than those of the artesian wells and underdrinage water. The ${\delta}^{15}N$ values of total-N and $NO_3-N$ of the soils were 6.1 and 5.10‰, respectively, while those for nitrification-inhibitor containing fertilizer and slow-release fertilizers were -6.1 and -2.2‰, respectively.