• Analytical Science and Technology
• /
• v.32 no.4
• /
• pp.121-130
• /
• 2019

Alumina is one of the most important ceramic materials because of its useful physical and chemical properties. Recently, high-purity alumina has been used in various industrial fields. This leads to increasing demand for reliable elemental analysis of impurities in alumina samples. However, the chemical inertness of alumina makes the sample preparation for conventional elemental analysis a tremendously difficult task. Herein, we demonstrated the feasibility of laser ablation for effective sampling of alumina powder. Laser ablation performs sampling rapidly without any chemical reagents and also allows simultaneous optical emission spectroscopy and mass spectrometry analyses. For six alumina samples including certified reference materials and commercial products, laser-induced breakdown spectroscopy (LIBS) and laser-ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) analyses were performed simultaneously based on a common laser ablation sampling. LIBS was found to be useful to quantify alkali and alkaline earth metals with limits-of-detection (LODs) around 1 ppm. LA-ICP-MS could quantify transition metals such as Ti, Cu, Zn, and Zr with LODs in the range from a few tens to hundreds ppb.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.451-462
• /
• 2017

Physical weathering caused by external forces and chemical weathering caused by the decomposition or alteration of constituent materials are the two factors that dominate the mechanical properties of rocks. In this study, a field investigation was undertaken to identify the physical and chemical weathering characteristics of the biotite granite and granitic weathered soils in Gyeongju, South Korea. Samples were collected according to their grade of weathering and subjected to modal analysis, XRD analysis, XRF analysis, physical property tests, particle size distribution tests, and slake durability tests. Modal and XRD analysis identified these rocks as biotite granite; secondary alteration minerals were not observed. Physical property tests and particle size distribution analyses indicate an average porosity of 41.28% and a sand content of > 90 wt.%. These values are somewhat higher than those of granites in general. The results of the slake durability test and XRF analyses show that the physical and chemical weathering indices of the samples vary with the degree of weathering.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.7
• /
• pp.1369-1373
• /
• 2008

A stable twist boat conformation of thiane S-oxide 1a in solid state and in solution was unambiguously determined by single crystal X-ray crystallography and solution NMR analyses. On the contrary, the thiane Sdioxide 2 which was obtained from the oxidation of corresponding thiane S-oxide 1a was confirmed to adopt a regular chair conformation.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.326-331
• /
• 1995

Poly(enaryloxynitriles) containing Schiff bases were prepared from p-bis(1-chloro-2,2-dicyanovinyl)benzene (2) and various aromatic diols having Schiff base moiety by interfacial polymerization. The chemical structure of the polymers was confirmed through synthesis of their corresponding model compounds. All the polymers were soluble in polar aprotic solvents and their brittle films were cast from DMF solution. They showed a large exotherm around 340 ℃ attributable to the chemical change of dicyanovinyl group. Especially, curing of azomethine group was observed to occur at 390 ℃ by differential scanning calorimetry. According to the thermogravimetric analyses, they exhibited excellent thermal stability with 60-90% residual weight at 500 ℃ in nitrogen.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.323-327
• /
• 1998

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.3_4 s.141
• /
• pp.561-568
• /
• 2005

The irradiation of Ultra-Violet (UV) is an efficient treatment for polymer to improve hydrophilic properties. 4-Channel PET knit fabrics were treated with UVA and UVC to develop functional and environment-friendly fabric. The fabric was treated with various treatment times and distances from UV lamps having different wavelength. FT-IR and XPS investigated the chemical changes. To confirm the change of surface properties, contact angle, surface energy and SEM were examined. The study of UV as a treatment for PET knit fabric shows significant changes in chemical and surface properties, which is proved by analyses. FT-IR and XPS analyses prove the augmentation of carboxylic, Hydrophilic groups on the surfaces treated by UV. The increase of water contact angle and surface energy means more water wettable and surface energy of PET film was substantially increased by UV irradiation time. The ageing after surface treatment had little influence on the surface energy of the irradiated PET film. SEM proves the surface modification of PET such as etching, bubble and crack. The negative effects are increased in accordance with increasing treatment time.

• Journal of Engineering Education Research
• /
• v.8 no.3
• /
• pp.5-16
• /
• 2005

In this study, several issues of engineering education of Korea were pointed out through the survey for industrial employees in the areas of civil, chemical and electronics engineering. For the area of civil engineering, a questionnaire based upon the outcomes of ABEEK(accreditation board for engineering education of Korea) was developed for the survey, and the replies from the survey were then analyzed. For the areas of chemical and electronics engineering, data obtained from the literature study were used for analyses. The results of analyses show that the level of engineering education is much lower than that of the industrial demand in the case of all three divisions. It shows the urgency in improvement of engineering education.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.717-722
• /
• 1993

Reactions of [PtCl$_4$]$^{2-}$ with excess of dithiocarbamates in water lead to facile replacement of the chloro ligand by dithiocarbamato ligand to give [Pt(A)], [Pt(B)$_2$]Cl$_2$, [Pt(C)$_2$], and [Pt(D)(CH$_2$=CH$_2$)Cl]Cl. The complexes of platinum have been characterized by elemental analyses, infrared and UV-visible spectra, and conductivity measurements. Platinum(II)-dithiocarbamate complexes were soluble in polar solvents such as water, alcohol, acetone, dimethylformamide, and dimethylsulfoxide etc. The possible structure was proposed on the basis of elemental analyses and physical properties.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1516-1525
• /
• 2022

Interfacing the output of severe accident analysis with the input of radiological consequence analysis is an important and mandatory procedure at the beginning of Level 3 PSA. Such interfacing between the severe accident analysis code MELCOR and MACCS, one of the most commonly used consequence analysis codes, is relatively tractable since they share the same chemical groups, and the related interfacing software, MelMACCS, has already been developed. However, the linking between MAAP, another frequently used code for severe accident analyses, and MACCS has difficulties because MAAP employs a different chemical grouping method than MACCS historically did. More specifically, MAAP groups by chemical compound, while MACCS groups by chemical element. An appropriate interfacing method between MAAP and MACCS has therefore long been requested by users. This study suggests a way of extracting relevant information from MAAP results and providing proper source term information to MACCS by an appropriate treatment. Various parameters are covered in terms of magnitude and manner of release in this study, and special treatment is made for a bypass scenario. It is expected that the suggested approach will provide an important contribution as a guide to interface MAAP and MACCS when performing radiological consequence analyses.

• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.56-65
• /
• 1997

Chemical analysis, statistical analysis and geochemical study were carried out to investigate the influence of the geology on the chemical characferistics of the mineral water in Taegu area. A simple comparision between the chemical components of the mineral water and their bedrocks indicates that the bedrock types in the catchmerit area control the chemical characteristics of the surface water. However more objective evidences for the mineral water-bedrock relationship come from the statistical analyses(cluster analysis and factor analysis). The results of the statistical analyses suggest that the bedrock type factor explains the data variation seven times as much as pollution does, which evidently indicates that the bedrock in the study area mainly control the mineral water chemistries. The results of comparision of the statistical analyses results with the mineral weathering reactions and mineral stability diagrams can be summarized as follows: 1. Plagioclase weathering to kaolinite provides SiO$_2$ , Ca$^{2+}$ and Na$^+$, and muscovite weathering to kaolinite provides K$^+$, and amphibole and mica minerals weathering to kaolinite provides F to the mineral water. Most of Ca$^{2+}$ and Mg$^{2+}$ in the mineral water are the products of carbonate mineral dissolution. SO$_4^{2-}$ may be the byproduct of sulfide oxidation. 2. The weatering of silicate mineral produces Ca-rich smectite and kaolinite, but Ca-rich smectite is unstable and will be transformed to more stable kaolinite because of the continuous dilution of the mineral water by precipitation. By Hashimoto's Mineral Balance Index, S-10 and S-12 mineral spring water were evaluated tasty and healthy water, S-9 and S-11 mineral spring water were evaluated tasty water and S-7, S-8 and S-13 mineral spring water were evaluated healthy water.